Transition Metals and Organic Ligands Influence Biodegradation of 1,4-Dioxane

Effects of heavy metals and metalloids on the biodegradation of organic contaminants

Heavy metals and metalloids (HMMs) inhibit the biodegradation of organic pollutants. The degree of inhibition depends not only on the concentration and bioavailability of HMMs but also on additional factors, such as environmental variables (e.g., inorganic components, organic matter, pH, and redox potential), the nature of the metals, and microbial species. Based on the degradation pattern and metal concentrations causing half biodegradation rate reductions (RC50s), the inhibition of biodegradation was: Hg2+, As2O3 > Cu2+, Cd2+, Pb2+, Cr3+ > Ni2+, Co2+ > Mn2+, Zn2+ > Fe3+. Four patterns were observed: inhibition increases with increasing metal concentration; low concentrations stimulate, while high concentrations inhibit; high concentrations inhibit less; and mild inhibition remains constant. In addition, metal ion mixtures have more complex inhibitory effects on the degradation of organic pollutants, which may be greater than, similar to, or less than that of individual HMMs. Finally, the inhibitory mechanism of HMMs on biodegradation is reviewed. HMMs generally have little impact on the biodegradation pathway of organic pollutants for bacterial strains. However, when pollutants are biodegraded by the community, HMMs may activate microbial populations harbouring different transformation pathways. HMMs can affect the biodegradation efficiency of organic pollutants by changing the surface properties of microbes, interfering with degradative enzymes, and interacting with general metabolism.

Remedial strategies for abating 1,4-dioxane pollution-special emphasis on diverse biotechnological interventions

1,4-dioxane is a heterocyclic ether used as a polar industrial solvent and are released as waste discharges. 1,4-dioxane deteriorates health and quality, thereby attracts concern by the environment technologists. The need of attaining sustainable development goals have resulted in search of an eco-friendly and technically viable treatment strategy. This extensive review is aimed to emphasis on the (a) characteristics of 1,4-dioxane and their occurrence in the environment as well as their toxicity, (b) remedial strategies, such as physico-chemical treatment and advanced oxidation techniques. Special reference to bioremediation that involves diverse microbial strains and their mechanism are highlighted in this review. The role of macronutrients, stimulants and other abiotic cofactors in the biodegradation of 1,4-dioxane is discussed lucidly. We have critically discussed the inducible enzymes, enzyme-based remediation, distinct instrumental method of analyses to know the fate of intermediates produced from 1,4-dioxane biotransformation. This comprehensive survey also tries to put forth the different toxicity assessment tools used in evaluating the extent of detoxification of 1,4-dioxane achieved through biotransforming mechanism. Conclusively, the challenges, opportunities, techno-economic feasibility and future prospects of implementing 1,4-dioxane through biotechnological interventions are also discussed.

Treatment of 1,4-dioxane-containing water using carriers immobilized with indigenous microorganisms in landfill leachate treatment sludge: A laboratory-scale reactor study

1,4-Dioxane (DX) is a contaminant of emerging concern in aquatic environments, and is frequently found in landfill leachate. As a biological method applicable to landfill leachate treatment facilities, the feasibility of DX treatment using carriers immobilized with microorganisms indigenous to landfill leachate treatment sludge was explored through laboratory-scale reactor experiments by introducing carriers prepared via microorganism immobilization in the aeration tank of a leachate treatment facility. Three different carrier materials were used to immobilize microorganisms, and a model DX-containing water (10 mg/L) was treated under continuous feeding. Biological DX removal to < 0.5 mg/L was achieved using all carrier types, thereby adhering to the effluent standard for landfill leachate in Japan, which confirms the usefulness of the proposed method. However, weaker aeration and enhanced DX loading drastically impaired the DX removal performance depending on the carrier materials. This suggests the importance of carrier selection and control of the operational variables to ensure stable and effective DX removal. Microbial community analyses revealed that Pseudonocardia with thm genes may largely contribute to the initial oxidation of DX, irrespective of the carrier type, suggesting the importance of this population for the continuous treatment of low DX concentrations with mixed microbial consortia.

Chemo-metrically formulated consortium with selectively screened bacterial strains for ameliorated biotransformation and detoxification of 1,4-dioxane

The biotransformation of 1,4-dioxane, a endrocrine disrupting chemical was achieved using different bacterial strains and their consortia. Three different bacterial isolates were screened on their ability to grow with 50 mg/L 1,4-dioxane in the basal mineral medium. Then the isolates were tested for its efficiency to biotransform 1000 mg/L 1,4-dioxane at varying period of time; 24-120 h. The isolates were distinguished by their morphological features and 16 S rRNA gene sequencing was done to evaluate the phylogenetic relationships. The isolates were identified as Bacillus marisflavi strain MGA, Aeromonas hydrophila strain AG and Shewanella putrefaciens strain AG. The degree of biotransformation was escalated by constructing a bacterial consortium using statistical tool; response-mixture matrix under the design of experiments. The fully grown bacterial strains were used as ingredients in different proportions to formulate the consortium. The biotransformation was analyzed for functional attenuation using spectroscopic techniques and reduction in 1,4-dioxane level was confirmed using mass spectrometry. The precise quantification of biotransformation using mass spectral profile revealed that the consortium removed 31%, 61% and 85% of 1000 mg/L 1,4-dioxane within 96, 120 and 144 h respectively. The activities of inducible laccase were elucidated during biotransformation of 1,4-dioxane. Bio-toxicity of treated and untreated 1,4-dioxane on brine shrimp; Artemia salina showed that the biotransformed products were less toxic. Therefore, this report would be first of its kind to report the biotransformation and detoxification of 1,4-dioxane by a statistically designed bacterial consortium.

Biodegradation of Tetrahydrofuran by the Newly Isolated Filamentous Fungus Pseudallescheria boydii ZM01

Tetrahydrofuran (THF) is widely used as a precursor for polymer syntheses and a versatile solvent in industries. THF is an environmental hazard and carcinogenic to humans. In the present study, a new THF-degrading filamentous fungus, Pseudallescheria boydii ZM01, was isolated and characterized. Strain ZM01 can tolerate a maximum THF concentration of 260 mM and can completely degrade 5 mM THF in 48 h, with a maximum THF degradation rate of 133.40 mg THF h⁻¹ g⁻¹ dry weight. Growth inhibition was not observed when the initial THF concentration was below 150 mM, and the maximum THF degradation rate was still maintained at 118.21 mg THF h⁻¹ g⁻¹ dry weight at 50 mM THF, indicating the great potential of this strain to degrade THF at high concentrations. The initial key metabolic intermediate 2-hydroxytetrahydrofuran was detected and identified by gas chromatography (GC) analyses for the first time during the THF degradation process. Analyses of the effects of initial pH, incubation temperature, and heavy metal ions on THF degradation revealed that strain ZM01 can degrade THF under a relatively wide range of conditions and has good degradation ability under low pH and Cu²⁺ stress, suggesting its adaptability and applicability for industrial wastewater treatment.

Cometabolic biotransformation of 1,4-dioxane in mixtures with hexavalent chromium using attached and planktonic bacteria

Biological treatment of 1,4-dioxane, a probable human carcinogen and a recalcitrant contaminant of concern, is often complicated by the presence of inhibitory co-contaminants. Due to its use as a solvent, wetting agent, and stabilizer for chlorinated solvents employed in metal vapor degreasing, 1,4-dioxane has often been found to occur with a variety of co-contaminants, including heavy metals such as hexavalent chromium [Cr(VI)]. Cr(VI) also occurs naturally in groundwater due to geological formations, but also has sources that can coincide with 1,4-dioxane from anthropogenic activities such as metal vapor degreasing. Biodegradation of 1,4-dioxane can be accomplished by microbes that use it as a source of carbon or energy as well as those that cometabolize it after growth on other organic substrates. A propanotroph, Mycobacterium austroafricanum JOB5, was grown in planktonic pure cultures and biofilms to determine its ability to cometabolize 1,4-dioxane in the presence of varying concentrations of Cr(VI). 1,4-Dioxane cometabolism by JOB5 planktonic cells was uninhibited by Cr(VI) at levels up to 10 mg/L, while biofilms were only mildly inhibited at 10 mg/L. As an important part of the biofilms commonly found in subsurface aquifers and engineered systems, extracellular polymeric substances (EPS) were found to play an important role in preventing Cr(VI) exposure to cells. We observed that soluble EPS were able to bind to Cr(VI) and theorize that biofilm-associated EPS additionally served to impede penetration of the biofilm structure by Cr(VI), thus mitigating exposure and toxicity. These findings suggest that bioremediation would be a viable treatment strategy for 1,4-dioxane-contaminated waters that contain elevated levels of Cr(VI) in natural and built environments.

Digital PCR as an Emerging Tool for Monitoring of Microbial Biodegradation

Biodegradation of contaminants is extremely complicated due to unpredictable microbial behaviors. Monitoring of microbial biodegradation drives us to determine (1) the amounts of specific degrading microbes, (2) the abundance, and (3) expression level of relevant functional genes. To this endeavor, the cultivation independent polymerase chain reaction (PCR)-based monitoring technique develops from endpoint PCR, real-time quantitative PCR, and then into novel digital PCR. In this review, we introduce these three categories of PCR techniques and summarize the timely applications of digital PCR and its superiorities than qPCR for biodegradation monitoring. Digital PCR technique, emerging as the most accurately absolute quantification method, can serve as the most promising and robust tool for monitoring of microbial biodegradation.

Stimulatory and inhibitory effects of metals on 1,4-dioxane degradation by four different 1,4-dioxane-degrading bacteria

This study evaluates the effects of various metals on 1,4-dioxane degradation by the following four bacteria: Pseudonocardia sp. D17; Pseudonocardia sp. N23; Mycobacterium sp. D6; and Rhodococcus aetherivorans JCM 14343. Eight transition metals [Co(II), Cu(II), Fe(II), Fe(III), Mn(II), Mo(VI), Ni(II), and Zn(II)] were used as the test metals. Results revealed, for the first time, that metals had not only inhibitory but also stimulatory effects on 1,4-dioxane biodegradation. Cu(II) had the most severe inhibitory effects on 1,4-dioxane degradation by all of the test strains, with significant inhibition at concentrations as low as 0.01-0.1 mg/L. This inhibition was probably caused by cellular toxicity at higher concentrations, and by inhibition of degradative enzymes at lower concentrations. In contrast, Fe(III) enhanced 1,4-dioxane degradation by Mycobacterium sp. D6 and R. aetherivorans JCM 14343 the most, while degradation by the two Pseudonocardia strains was stimulated most notably in the presence of Mn(II), even at concentrations as low as 0.001 mg/L. Enhanced degradation is likely caused by the stimulation of soluble di-iron monooxygenases (SDIMOs) involved in the initial oxidation of 1,4-dioxane. Differences in the stimulatory effects of the tested metals were likely associated with the particular SDIMO types in the test strains.

Enrichment and Analysis of Stable 1,4-dioxane-Degrading Microbial Consortia Consisting of Novel Dioxane-Degraders

Biodegradation of 1,4-dioxane, a water contaminant of emerging concern, has drawn substantial attention over the last two decades. A number of dioxane-degraders have been identified, though many of them are unable to metabolically utilize 1,4-dioxane. Moreover, it is considered more preferable to use microbial consortia rather than the pure strains, especially in conventional bioreactors for industrial wastewater treatment. In the present study, a stable 1,4-dioxane-degrading microbial consortium was enriched, namely 112, from industrial wastewater by nitrate mineral salt medium (NMSM). The consortium 112 is capable of utilizing 1,4-dioxane as a sole carbon and energy source, and can completely degrade 1,4-dioxane up to 100 mg/L. From the consortium 112, two 1,4-dioxane-degrading bacterial strains were isolated and identified, in which the Variovorax sp. TS13 was found to be a novel 1,4-dioxane-degrader that can utilize 100 mg/L of 1,4-dioxane. The efficacy of the consortium 112 was increased significantly when we cultured the consortium with mineral salt medium (MSM). The new consortium, N112, could utilize 1,4-dioxane at a rate of 1.67 mg/L·h. The results of the ribosomal RNA intergenic spacer analysis (RISA) depicted that changes in the microbial community structure of consortium 112 was the reason behind the improved degradation efficiency of consortium N112, which was exhibited as a stable and effective microbial consortium with a high potential for bioremediation of the dioxane-impacted sites and contaminated industrial wastewater.

Mechanisms of 1,4-Dioxane Biodegradation and Adsorption by Bio-Zeolite in the Presence of Chlorinated Solvents: Experimental and Molecular Dynamics Simulation Studies

The use of bioaugmented zeolite (bio-zeolite) can be an effective technology for irreversibly removing recalcitrant organic pollutants in aqueous mixtures. Removal of 1,4-dioxane by a bio-zeolite (Pseudonocardia dioxanivorans CB1190-bioaugmented ZSM-5) in the presence of several chlorinated volatile organic compounds (CVOCs) was superior to removal by adsorption using abiotic zeolite. Mixtures containing 1,1-dichloroethene (1,1-DCE) were an exception, which completely inhibited the bio-zeolite system. Specific adsorption characteristics were studied using adsorption isotherms in single-solute and bisolute systems accompanied by Polanyi theory-based Dubinin-Astakhov (DA) modeling. Adsorption behavior was examined using characteristic energy (E_a/H) from modified DA models and molecular dynamics simulations. While the tight-fit of 1,4-dioxane in the hydrophobic channels of ZSM-5 appears to drive 1,4-dioxane adsorption, the greater hydrophobicity of trichloroethene and cis-1,2-dichloroethene cause them have a greater affinity over 1,4-dioxane for adsorption sites on the zeolite. 1,4-Dioxane was desorbed and displaced by CVOCs except 1,1-DCE because of its low E_a/H value, explaining why bio-zeolite only biodegraded 1,4-dioxane in 1,1-DCE-free CVOC mixtures. Understanding the adsorption mechanisms of solutes in complex mixtures is crucial for the implementation of sorption-based treatment technologies for the removal of complex contaminant mixtures from aquatic environments.

Response and recovery of microbial communities subjected to oxidative and biological treatments of 1,4-dioxane and co-contaminants

Microbial community dynamics were characterized following combined oxidation and biodegradation treatment trains for mixtures of 1,4-dioxane and chlorinated volatile organic compounds (CVOCs) in laboratory microcosms. Bioremediation is generally inhibited by co-contaminate CVOCs; with only a few specific bacterial taxa reported to metabolize or cometabolize 1,4-dioxane being unaffected. Chemical oxidation by hydrogen peroxide (H₂O₂) as a non-selective treatment demonstrated 50-80% 1,4-dioxane removal regardless of the initial CVOC concentrations. Post-oxidation bioaugmentation with 1,4-dioxane metabolizer Pseudonocardia dioxanivorans CB1190 removed the remaining 1,4-dioxane. The intrinsic microbial population, biodiversity, richness, and biomarker gene abundances decreased immediately after the brief oxidation phase, but recovery of cultivable microbiomes and a more diverse community were observed during the subsequent 9-week biodegradation phase. Results generated from the Illumina Miseq sequencing and bioinformatics analyses established that generally oxidative stress tolerant genus Ralstonia was abundant after the oxidation step, and Cupriavidus, Pseudolabrys, Afipia, and Sphingomonas were identified as dominant genera after aerobic incubation. Multidimensional analysis elucidated the separation of microbial populations as a function of time under all conditions, suggesting that temporal succession is a determining factor that is independent of 1,4-dioxane and CVOCs mixtures. Network analysis highlighted the potential interspecies competition or commensalism, and dynamics of microbiomes during the biodegradation phase, in line with the shifts of predominant genera and various developing directions during different steps of the treatment train. Collectively, this study demonstrated that chemical oxidation followed by bioaugmentation is effective for treating 1,4-dioxane, even in the presence of high levels of CVOC mixtures and residual peroxide, a disinfectant, and enhanced our understanding of microbial ecological impacts of the treatment train. These results will be valuable for predicting treatment synergies that lead to cost savings and improved remedial outcomes in short-term active remediation as well as long-term changes to the environmental microbial communities.

Co-contaminant effects on 1,4-dioxane biodegradation in packed soil column flow-through systems

Biodegradation of 1,4-dioxane was examined in packed quartz and soil column flow-through systems. The inhibitory effects of co-contaminants, specifically trichloroethene (TCE), 1,1-dichloroethene (1,1-DCE), and copper (Cu²⁺) ions, were investigated in the columns either with or without bioaugmentation with a 1,4-dioxane degrading bacterium Pseudonocardia dioxanivorans CB1190. Results indicate that CB1190 cells readily grew and colonized in the columns, leading to significant degradation of 1,4-dioxane under oxic conditions. Degradation of 1,4-dioxane was also observed in the native soil (without bioaugmentation), which had been previously subjected to enhanced reductive dechlorination treatment for co-contaminants TCE and 1,1-DCE. Bioaugmentation of the soil with CB1190 resulted in nearly complete degradation at influent concentrations of 3-10 mg L^-1 1,4-dioxane and a residence reaction time of 40-80 h, but the presence of co-contaminants, 1,1-DCE and Cu²⁺ ions (up to 10 mg L^-1), partially inhibited 1,4-dioxane degradation in the untreated and bioaugmented soil columns. However, the inhibitory effects were much less severe in the column flow-through systems than those previously observed in planktonic cultures, which showed near complete inhibition at the same co-contaminant concentrations. These observations demonstrate a low susceptibility of soil microbes to the toxicity of 1,1-DCE and Cu²⁺ in packed soil flow-through systems, and thus have important implications for predicting biodegradation potential and developing sustainable, cost-effective technologies for in situ remediation of 1,4-dioxane contaminated soils and groundwater.

Abiotic and bioaugmented granular activated carbon for the treatment of 1,4-dioxane-contaminated water

1,4-Dioxane is a probable human carcinogen and an emerging contaminant that has been detected in surface water and groundwater resources. Many conventional water treatment technologies are not effective for the removal of 1,4-dioxane due to its high water solubility and chemical stability. Biological degradation is a potentially low-cost, energy-efficient approach to treat 1,4-dioxane-contaminated waters. Two bacterial strains, Pseudonocardia dioxanivorans CB1190 (CB1190) and Mycobacterium austroafricanum JOB5 (JOB5), have been previously demonstrated to break down 1,4-dioxane through metabolic and co-metabolic pathways, respectively. However, both CB1190 and JOB5 have been primarily studied in laboratory planktonic cultures, while most environmental microbes grow in biofilms on surfaces. Another treatment technology, adsorption, has not historically been considered an effective means of removing 1,4-dioxane due to the contaminant's low K_oc and K_ow values. We report that the granular activated carbon (GAC), Norit 1240, is an adsorbent with high affinity for 1,4-dioxane as well as physical dimensions conducive to attached bacterial growth. In abiotic batch reactor studies, 1,4-dioxane adsorption was reversible to a large extent. By bioaugmenting GAC with 1,4-dioxane-degrading microbes, the adsorption reversibility was minimized while achieving greater 1,4-dioxane removal when compared with abiotic GAC (95-98% reduction of initial 1,4-dioxane as compared to an 85-89% reduction of initial 1,4-dioxane, respectively). Bacterial attachment and viability was visualized using fluorescence microscopy and confirmed by amplification of taxonomic genes by quantitative polymerase chain reaction (qPCR) and an ATP assay. Filtered samples of industrial wastewater and contaminated groundwater were also tested in the bioaugmented GAC reactors. Both CB1190 and JOB5 demonstrated 1,4-dioxane removal greater than that of the abiotic adsorbent controls. This study suggests that bioaugmented adsorbents could be an effective technology for 1,4-dioxane removal from contaminated water resources.

Mechanism of 1,4-dioxane microbial degradation revealed by 16S rRNA and metatranscriptomic analyses

1,4-Dioxane (dioxane), a probable human carcinogen, often exists in industrial wastewater and domestic sewage. In this study, we applied 16S rRNA and metatranscriptomic methods to analyze the dioxane biodegradation mechanism by activated sludge. Tetrahydrofuran (THF) was added as an essential co-metabolite to promote the degradation of dioxane. We found the dioxane removal ratio increased with increasing THF concentrations. When the THF concentration increased from 60.0 to 200.0 mg/L, the dioxane degradation rate was stable. Three additions of ∼60.0 mg/L THF resulted in better dioxane degradation than one addition of 200 mg/L THF. Ammonia-oxidizing and denitrifying bacteria with methane monooxygenases (MOs) and ammonia MOs played the most important roles during the degradation of dioxane. Kyoto Encyclopedia of Genes and Genomes metabolic pathway and functional genes analyses showed that the activated sludge system was complex and stable when dioxane was added. In future studies, primers should be designed to identify specific bacteria and functional MO genes, which would help reveal the function of various bacteria and their MOs during dioxane degradation.

Biodegradation Kinetics of 1,4-Dioxane in Chlorinated Solvent Mixtures

This study investigated the impacts of individual chlorinated solvents and their mixtures on aerobic 1,4-dioxane biodegradation by Pseudonocardia dioxanivorans CB1190. The established association of these co-occurring compounds suggests important considerations for their respective biodegradation processes. Our kinetics and mechanistic studies demonstrated that individual solvents inhibited biodegradation of 1,4-dioxane in the following order: 1,1-dichloroethene (1,1-DCE) > cis-1,2-diochloroethene (cDCE) > trichloroethene (TCE) > 1,1,1-trichloroethane (TCA). The presence of 5 mg L(-1) 1,1-DCE completely inhibited 1,4-dioxane biodegradation. Subsequently, we determined that 1,1-DCE was the strongest inhibitor of 1,4-dioxane biodegradation by bacterial pure cultures exposed to chlorinated solvent mixtures as well as in environmental samples collected from a site contaminated with chlorinated solvents and 1,4-dioxane. Inhibition of 1,4-dioxane biodegradation rates by chlorinated solvents was attributed to delayed ATP production and down-regulation of both 1,4-dioxane monooxygenase (dxmB) and aldehyde dehydrogenase (aldH) genes. Moreover, increasing concentrations of 1,1-DCE and cis-1,2-DCE to 50 mg L(-1) respectively increased 5.0-fold and 3.5-fold the expression of the uspA gene encoding a universal stress protein. In situ natural attenuation or enhanced biodegradation of 1,4-dioxane is being considered for contaminated groundwater and industrial wastewater, so these results will have implications for selecting 1,4-dioxane bioremediation strategies at sites where chlorinated solvents are present as co-contaminants.

Evidence of 1,4-dioxane attenuation at groundwater sites contaminated with chlorinated solvents and 1,4-dioxane

There is a critical need to develop appropriate management strategies for 1,4-dioxane (dioxane) due to its widespread occurrence and perceived recalcitrance at groundwater sites where chlorinated solvents are present. A comprehensive evaluation of California state (GeoTracker) and Air Force monitoring records was used to provide significant evidence of dioxane attenuation at field sites. Temporal changes in the site-wide maximum concentrations were used to estimate source attenuation rates at the GeoTracker sites (median length of monitoring period = 6.8 years). While attenuation could not be established at all sites, statistically significant positive attenuation rates were confirmed at 22 sites. At sites where dioxane and chlorinated solvents were present, the median value of all statistically significant dioxane source attenuation rates (equivalent half-life = 31 months; n = 34) was lower than 1,1,1-trichloroethane (TCA) but similar to 1,1-dichloroethene (1,1-DCE) and trichloroethene (TCE). Dioxane attenuation rates were positively correlated with rates for 1,1-DCE and TCE but not TCA. At this set of sites, there was little evidence that chlorinated solvent remedial efforts (e.g., chemical oxidation, enhanced bioremediation) impacted dioxane attenuation. Attenuation rates based on well-specific records from the Air Force data set confirmed significant dioxane attenuation (131 out of 441 wells) at a similar frequency and extent (median equivalent half-life = 48 months) as observed at the California sites. Linear discriminant analysis established a positive correlation between dioxane attenuation and increasing concentrations of dissolved oxygen, while the same analysis found a negative correlation with metals and CVOC concentrations. The magnitude and prevalence of dioxane attenuation documented here suggest that natural attenuation may be used to manage some but not necessarily all dioxane-impacted sites.