Effective Utilization of Carbohydrate in Corncob to Synthesize Furfuralcohol by Chemical-Enzymatic Catalysis in Toluene-Water Media

Biocatalytic Hydrogenation of Biomass-Derived Furan Aldehydes to Alcohols

The biomass-derived furan aldehydes furfural (FF) and 5-hydroxymethylfurfural (HMF) are versatile platform chemicals used to produce various value-added chemicals through further valorization processes. Selectively reducing C═O in FF and HMF molecules to form furfuryl alcohol (FAL) and 2,5-bis(hydroxymethyl)furan (BHMF), represents an important research field in upgrading biomass-based furan compounds. Currently, the reduction of furan aldehydes to furan alcohols through chemical transformation often leads to unavoidable environmental issues and the formation of potential byproducts. Biocatalysis has demonstrated expanded applications in converting biomass-derived furan aldehydes into a diverse array of value-added chemicals. This process exhibits significant potential in organic synthesis and biotechnology due to its green and sustainable properties. The biocatalytic reduction of FF and HMF represents an especially important route for the selective synthesis of FAL and BHMF. This review discusses recent progress in the biosynthesis of FAL and BHMF from biomass-derived FF and HMF through biocatalytic processes. Recently discovered enzymes and whole cells used as biocatalysts for the production of furan alcohols are summarized. In addition, chemoenzymatic cascades for synthesizing furan alcohols from biomass hydrolysate and raw biomass materials are also discussed.

Electroenzymatic Reduction of Furfural to Furfuryl Alcohol by an Electron Mediator and Enzyme Orderly Assembled Biocathode

The electroenzymatic valorization of biomass derivatives into valuable biochemicals has a promising outlook. However, bottlenecks including poor electron transfer between the electrode surface and oxidoreductase, inefficient regeneration of cofactors, and high cost of enzymes and electron mediators hindered the realistic applications of the technique. Herein, to address the above technical barriers, a novel bio-electrocatalytic system that integrates the electrochemical NADH regeneration and enzymatic reaction was constructed, using an orderly assembled composite bioelectrode consisting of an outer immobilized enzyme layer and a sandwiched redox mediator rhodium complex layer. The as-prepared composite bioelectrode was further applied for the highly selective hydrogenation of furfural into furfural alcohol. Results indicated that the enzyme activity was significantly improved, while the furfural valorization was promoted by effective interfacial electron transition and co-factor regeneration on the composite bioelectrode. Considerable high furfural conversion (96.4%) can be achieved accompanied by a furfural alcohol selectivity of 90.0% at -1.2 V (vs Ag/AgCl). The novel composite bioelectrode also showed good stability and reusability. Up to 85.1% of the original furfural alcohol selectivity can be preserved after 10 times of recycling. This work presents a promising green alternative for the valorization of furfural, which also shows great potential extending to the valorization of other biomass compounds.

Microwave-assisted deep eutectic solvents/dimethyl sulfoxide system for efficient valorization of sugar bagasse waste into platform chemicals: A biorefinery approach for circular bioeconomy

The exploitation of lignocellulosic biomass (LB) such as sugar bagasse waste in biorefineries is the most cost-effective and favourable sustainable approach to producing essential platform chemicals, materials, and energy environmentally benignly. Herein, a microwave-mediated deep eutectic solvents (DESs)/dimethyl sulfoxide (DMSO) system for efficiently processing LB waste into platform chemicals was proposed thereof. Under optimized appropriate diverse parameters such as solvent varieties, catalyst dosage, DMSO addition, reaction time and temperature, the proposed catalytic system (i.e., microwave mediated DESs/DMSO system) has demonstrated significant yields of 5-hydroxymethylfurfural (5-HMF), furfural (FF) and levulinic acid (LevA) of 31.29 %, 28.38 % and 35.65 %, respectively. These favourable results were obtained at the reaction temperature of 140 °C for 40 min. The anticipated catalytic system's activation energy (Ea) was found to be 29.11 kJ/mol. Hence, a practical, inexpensive and sustainable process with the potential of high-value platform chemicals, explicitly for a sustainable strategy in a circular bioeconomy was proposed.

Valorization of Waste Lignocellulose to Furfural by Sulfonated Biobased Heterogeneous Catalyst Using Ultrasonic-Treated Chestnut Shell Waste as Carrier

Recently, the highly efficient production of value-added biobased chemicals from available, inexpensive, and renewable biomass has gained more and more attention in a sustainable catalytic process. Furfural is a versatile biobased chemical, which has been widely used for making solvents, lubricants, inks, adhesives, antacids, polymers, plastics, fuels, fragrances, flavors, fungicides, fertilizers, nematicides, agrochemicals, and pharmaceuticals. In this work, ultrasonic-treated chestnut shell waste (UTS-CSW) was utilized as biobased support to prepare biomass-based heterogeneous catalyst (CSUTS-CSW) for transforming waste lignocellulosic materials into furfural. The pore and surface properties of CSUTS-CSW were characterized with BET, SEM, XRD, and FT-IR. In toluene–water (2:1, v:v; pH 1.0), CSUTS-CSW (3.6 wt%) converted corncob into furfural yield in the yield of 68.7% at 180 °C in 15 min. CSUTS-CSW had high activity and thermostability, which could be recycled and reused for seven batches. From first to seventh, the yields were obtained from 68.7 to 47.5%. Clearly, this biobased solid acid CSUTS-CSW could be used for the sustainable conversion of waste biomasses into furfural, which had potential application in future.

An Effective Hybrid Strategy for Conversion of Biomass into Furfurylamine by Tandem Pretreatment and Biotransamination

In this work, an effective hybrid strategy was developed for tandem conversion of biomass to furfurylamine with tin-based solid acid Sn-Maifanitum stone and recombinant Escherichia coli whole cells harboring ω-transaminase. 90.3 mM furfural was obtained from corncob (75 g/L) at 170 °C for 0.5 h over Sn-Maifanitum stone catalyst (3.5 wt%) in the aqueous media (pH 1.0), which could be further bioconverted into furfurylamine at 74.0% yield (based on biomass-derived furfural) within 20.5 h. Finally, an efficient recycling and reuse of Sn-Maifanitum stone catalyst and immobilized Escherichia coli AT2018 whole-cell biocatalyst was developed for the synthesis of furfurylamine from biomass in the one-pot reaction system.

Chemoenzymatic Synthesis of Furfuryl Alcohol from Biomass in Tandem Reaction System

In this study, chemoenzymatic synthesis of furfuryl alcohol from biomass (e.g., corncob, bamboo shoot shell, and rice straw) was attempted by the tandem catalysis with Lewis acid (SnCl₄ or solid acid SO₄^2-/SnO₂-bentonite) and biocatalyst in one-pot manner. Compared with SnCl₄, solid acid SO₄^2-/SnO₂-bentonite had higher catalytic activity for converting biomass into furfural, which could be biologically converted into furfuryl alcohol with Escherichia coli CCZU-H15 whole-cell harboring reductase activity. Sequential catalysis of biomass into furfural with SO₄^2-/SnO₂-bentonite (3.0 wt%) at 170 °C for 0.5 h and bioreduction of furfural with whole cells at 30 °C for 4.5 h were used for the effective synthesis of furfuryl alcohol in one-pot media. Corncob, bamboo shoot shell, and rice straw (3.0 g, dry weight) could be converted into 65.7, 50.3, and 58.5 mM furfuryl alcohol with the yields of 0.26, 0.25, and 0.23 g furfuryl alcohol/(g xylan in biomass) in 40 mL reaction media. Finally, an efficient process of recycling and reusing of SO₄^2-/SnO₂-bentonite catalyst and immobilized whole-cell biocatalyst was developed for the chemoenzymatic synthesis of furfuryl alcohol from biomass in the one-pot reaction system.

One-pot chemo-enzymatic conversion of D-xylose to furfuralcohol by sequential dehydration with oxalic acid plus tin-based solid acid and bioreduction with whole-cells

In this study, organic acid could be used as co-catalyst for assisting solid acid SO₄^2-/SnO₂-argil to convert hemicellulose-derived D-xylose into furfural. The relationship between pKa of organic acid and turnover frequency (TOF) of co-catalysis with organic acid plus SO₄^2-/SnO₂-argil was explored on the conversion of D-xylose to furfural. Oxalic acid (pKa = 1.25) (0.35 wt%) was found to be the optimum co-catalyst for assisting SO₄^2-/SnO₂-argil (3.6 wt%) to synthesize furfural from D-xylose (20 g/L) at 180 °C for 20 min, and the furfural yield and TOF could be obtained at 57.07% and 6.26 h^-1, respectively. Finally, the obtained furfural (107.6 mM) could be completely biotransformed to furfuralcohol by recombinant Escherichia coli CCZU-K14 whole-cells at 30 °C and pH 6.5 in the presence of 1.5 mol glucose/mol furfural and 400 mM D-xylose. Clearly, this strategy shows high potential application for the effective synthesis of furfuralcohol from biomass-derived D-xylose.