Immobilization of β-Galactosidase From Aspergillus oryzae on Electrospun Gelatin Nanofiber Mats for the Production of Galactooligosaccharides

Covalently immobilized β-galactosidase onto a novel alginate/lemon peel carrier: Catalytic, kinetic, stability studies, and its application in the production of whey high-protein beverage

β-Galactosidase (βG) was immobilized on novel alginate/lemon peel (Alg/LP) beads, achieving an immobilization yield of 84.7 % and an efficiency of 96.6 %. Both free and immobilized enzymes exhibited optimal activity at 50 °C and pH 5. The immobilized enzyme (Alg/LP/βG) demonstrated significantly improved thermal stability and broader pH tolerance compared to its free form. Immobilization notably altered enzyme kinetics, reducing Km by 57 % and Vmax by 13.4 %. Alg/LP/βG displayed excellent storage stability at 4 °C, retaining 91.3 % activity after 21 days and 79.6 % activity after 35 days. It also maintained 100 % activity after 11 cycles and 75.4 % activity after 15 operational cycles. The enzyme's application was explored in producing high-protein beverages from 13 % whey protein concentrate, enhancing sweetness by hydrolyzing lactose into glucose and galactose, which were further sweetened with 7 % sucrose. Adding lemon peel powder (LPP) improved the beverage's flavor, antioxidant properties, total phenolic content, and viscosity while keeping its chemical composition low. Sensory evaluation identified the beverage with 0.4 % LPP as the most preferred. This study highlights the potential of Alg/LP beads as an effective support matrix for β-galactosidase, offering enhanced stability, reusability, and applicability, particularly for enzymatic processes in the food industry.

Advanced applications in enzyme-induced electrospun nanofibers

Electrospun nanofibers, renowned for their high specific surface area, robust mechanical properties, and versatile chemical functionalities, offer a promising platform for enzyme immobilization. Over the past decade, significant strides have been made in developing enzyme-induced electrospun nanofibers (EIEN). This review systematically summarizes the advanced applications of EIEN which are fabricated using both non-specific immobilization methods including interfacial adsorption (direct adsorption, cross-linking, and covalent binding) and encapsulation, and specific immobilization techniques (coordination and affinity immobilization). Future research should prioritize optimizing immobilization techniques to achieve a balance between enzyme activity, stability, and cost-effectiveness, thereby facilitating the industrialization of EIEN. We elucidate the rationale behind various immobilization methods and their applications, such as wastewater treatment, biosensors, and biomedicine. We aim to provide guidelines for developing suitable EIEN immobilization techniques tailored to specific future applications.

Amorphous-crystalline phase transition and intrinsic magnetic property of nickel organic framework for easy immobilization and recycling of β-Galactosidase

This work describes the synthesis of fibrous nickel-based metal organic framework (Ni-ZIF) via simple solvothermal method. The material formed was calcinated at 400, 600, 800 °C to improve its surface area, porosity and enzyme binding capacity. Changes in X-ray diffraction pattern after calcination revealed the Ni-ZIF transitioned from amorphous to crystalline structure. The surface area, pore volume and pore size for Ni-ZIF@600 were found to be 312.15 m2/g, 0.88 cm3/g and 10.28 nm, with an enzyme loading capacity of 593.85 mg/g after 30 h The free (β-Gal-LEH) and immobilized β-Galactosidase were stable at pH 7.5, temperature 50 °C, and yielded 70.70 and 63.95 mM glucose after milk lactose hydrolysis, respectively. The Ni-ZIF@600@β-Gal-LEH exhibited high enzyme retention capacity, maintaining 59.44 % of its original activity after 6-cycles. The enhanced magnetic property, enzyme binding capacity and easy recoverability of the calcinated Ni-ZIF could guarantee its industrial significance as immobilization module for enzyme-mediated catalysis.

Biotechnological application of Aspergillus oryzae β-galactosidase immobilized on glutaraldehyde modified zinc oxide nanoparticles

The current research demonstrates the synthesis of zinc oxide nanoparticles (ZnO-NPs) via green nanotechnology approach (Azatirachta indica leaves). The size of the synthesized ZnO-NPs was confirmed as 27 nm by TEM. Glutaraldehyde was used to modify the surface of the developed ZnO-NPs in order to promote covalent binding of Aspergillus oryzae β-galactosidase. Enzyme activity was achieved as 93% on glutaraldehyde modified ZnO-NPs. The immobilized enzyme exhibited significant enhancement in activity under extreme temperature and pH variations, as compared to the soluble β-galactosidase (SβG). It was further observed that the immobilized enzyme retained 58% activity at 5% galactose concentration. However, under similar experimental conditions, SβG showed 27% activity. Reusability of immobilized enzyme revealed that it retained 89% activity even after fifth repeated use, and hence could be recovered easily by centrifugation for repeated use in biotechnological applications. Batch reactor experiment indicates that the immobilized enzyme displayed 81% and 70% lactose hydrolysis at 50 °C and 60 °C, respectively as compared to 70% and 58% lactose hydrolysis by soluble enzyme under identical conditions after 9 h.

Boosting the stability of β-galactosidase immobilized onto soy-protein isolate-glutaraldehyde-functionalized carrageenan beads

Uncontrolled enzyme-immobilizer interactions were evident after immobilizing β-galactosidase onto soy-protein isolate-glutaraldehyde-functionalized carrageenan beads. Such interactions triggered shortcomings in the immobilized β-galactosidase (iβGL) thermal and storage stabilities. The thermal stability of the iβGL was somewhat lesser than that of the free βGL. Moreover, the iβGL suffered an initial sharp fall-off in its activity after storing it. Thus, approaches were adopted to prevent the occurrence of such uncontrolled enzyme-immobilizer interactions, and accordingly, boost the stability of the iβGL. These approaches involved neutralizing the covalently reactive GA entities via glycine and also altering the functionalizing GA concentrations. Nonetheless, no improvement was recorded in the iβGL thermal stability and this indicated that the uncontrolled enzyme-immobilizer interactions were not mediated via GA. Another approach was then attempted which involved treating the iβGL with lactose. The lactose-treated iβGL (LT-iβGL) presented superior thermal stability as was verified from its smaller k _d and bigger t _1/2 and D-values. The LT-iβGL t _1/2 values were 5.60 and 3.53 fold higher than those presented by the free βGL at 62 and 65 °C, respectively. Moreover, the LT- iβGL presented loftier ΔG than did the free βGL. The storage stability of the LT- iβGL was also superior as it offered 100.41% of its commencing activity on its 43rd storage day. Thus, it could be concluded that lactose prevented the uncontrolled enzyme-immobilizer interactions. Finally, advantageous galacto-oligosaccharides (GOS) were prepared via the iβGL. The GOS were then analyzed with mass spectrometry, and it was shown that their degree of polymerization reached up to 7.

Recent trends using natural polymeric nanofibers as supports for enzyme immobilization and catalysis

All the disciplines of science, especially biotechnology, have given continuous attention to the area of enzyme immobilization. However, the structural support made by material science intervention determines the performance of immobilized enzymes. Studies have proven that nanostructured supports can maintain better catalytic performance and improve immobilization efficiency. The recent trends in the application of nanofibers using natural polymers for enzyme immobilization have been addressed in this review article. A comprehensive survey about the immobilization strategies and their characteristics are highlighted. The natural polymers, e.g., chitin, chitosan, silk fibroin, gelatin, cellulose, and their blends with other synthetic polymers capable of immobilizing enzymes in their 1D nanofibrous form, are discussed. The multiple applications of enzymes immobilized on nanofibers in biocatalysis, biosensors, biofuels, antifouling, regenerative medicine, biomolecule degradation, etc.; some of these are discussed in this review article.

Modeling and Optimization of β-Galactosidase Entrapping in Polydimethylsiloxane-Modified Silica Composites

Protein entrapment has multiple applications in enzymatic hydrolysis, drug delivery, etc. Here, we report the studies that successfully utilized the Box–Behnken design to model and optimize the parameters of β-galactosidase entrapment in sol–gel-derived silica composites. We have also demonstrated the influence of polymer–polydimethylsiloxane as a composite modifying agent on the activity of entrapped enzymes. We have determined how different sol-gel process parameters influence the activity of entrapped enzymes. The highest impact on β-galactosidase activity was exerted by the water:tetramethoxysilane ratio, followed by polydimethylsiloxane content. Optimized synthesis parameters have been utilized to obtain a composite with maximum β-galactosidase activity. Performed porosity studies have shown that the addition of polydimethylsiloxane increased the pore diameter. Microscopy studies demonstrated that polydimethylsiloxane-modified composites are softer and less rough. Studies of β-galactosidase activity using the o-NPG test showed statistically significant shifts in the enzyme temperature and pH profiles compared to the soluble form. An improvement in the reusability of the enzyme and a significant increase in the thermal stability was also observed. When lactose was used, a strong correlation was observed between the substrate concentration and the type of the catalyzed reaction. Moreover, we have demonstrated that the yields and rates of both lactose hydrolysis and galactooligosaccharides formation were correlated with reaction temperature and with the presence of polydimethylsiloxane. All these findings provide the opportunity for industrial use of optimized PDMS-modified silica composites in lactose elimination from dairy products, e.g., milk or whey.

Potential and Scale-Up of Pore-Through-Flow Membrane Reactors for the Production of Prebiotic Galacto-Oligosaccharides with Immobilized β-Galactosidase

The production of prebiotics like galacto-oligosaccharides (GOS) on industrial scale is becoming more important due to increased demand. GOS are synthesized in batch reactors from bovine lactose using the cost intensive enzyme β-galactosidase (β-gal). Thus, the development of sustainable and more efficient production strategies, like enzyme immobilization in membrane reactors are a promising option. Activated methacrylatic monoliths were characterized as support for covalent immobilized β-gal to produce GOS. The macroporous monoliths act as immobilized pore-through-flow membrane reactors (PTFR) and reduce the influence of mass-transfer limitations by a dominating convective pore flow. Monolithic designs in the form of disks (0.34 mL) and for scale-up cylindric columns (1, 8 and 80 mL) in three different reactor operation configurations (semi-continuous, continuous and continuous with recirculation) were studied experimentally and compared to the free enzyme system. Kinetic data, immobilization efficiency, space-time-yield and long-term stability were determined for the immobilized enzyme. Furthermore, simulation studies were conducted to identify optimal operation conditions for further scale-up. Thus, the GOS yield could be increased by up to 60% in the immobilized PTFRs in semi-continuous operation compared to the free enzyme system. The enzyme activity and long-time stability was studied for more than nine months of intensive use.

Production of d-Tagatose by Whole-Cell Conversion of Recombinant Bacillus subtilis in the Absence of Antibiotics

Simple Summary

d-tagatose is a valuable monosaccharide in the food industry produced from lactose by β-galactosidase and arabinose isomerase. To improve its production safety, d-alanine-deficient heterologous gene expression systems were constructed without antibiotics. The integrated expression and co-expression plasmids were used in different systems, also exploiting the need for d-alanine during cellular metabolism. The integration of the β-galactosidase gene in recombinant is uniquely innovative and promising, applying common knockout techniques to the expression of target genes and the production of high-value products.

Abstract

d-tagatose is a popular functional monosaccharide produced from lactose by β-galactosidase and arabinose isomerase. In this study, two d-alanine-deficient heterologous gene expression systems were constructed, B. subtilis 168 D1 and B. subtilis 168 D2, using overlapping extension PCR and the CRE/loxP system. The lacZ gene for β-galactosidase was integrated into a specific locus of the chassis B. subtilis 168 D2. A mutually complementary plasmid pMA5 with the alanine racemase gene alrA attached to it was constructed and used to assemble recombinant plasmids overexpressing β-galactosidase and arabinose isomerase. Afterward, an integrated recombinant was constructed by the plasmid expressing the arabinose isomerase gene araA of E. coli transform-competent B. subtilis 168 D2 cells. The co-expressing plasmids were introduced into alanine racemase knockout B. subtilis 168 D1. Whole-cell bioconversion was performed using the integrated recombinant with a maximum yield of 96.8 g/L d-tagatose from 500 g/L lactose, and the highest molar conversions were 57.2%. B. subtilis 168 D1/pMA5-alrA-araA-lacZ is capable of single-cell one-step production of d-tagatose. This study provides a new approach to the production of functional sugars.

Recent developments in enzyme immobilization technology for high-throughput processing in food industries

The demand for food and beverage markets has increased as a result of population increase and in view of health awareness. The quality of products from food processing industry has to be improved economically by incorporating greener methodologies that enhances the safety and shelf life via the enzymes application while maintaining the essential nutritional qualities. The utilization of enzymes is rendered more favorable in industrial practices via the modification of their characteristics as attested by studies on enzyme immobilization pertaining to different stages of food and beverage processing; these studies have enhanced the catalytic activity, stability of enzymes and lowered the overall cost. However, the harsh conditions of industrial processes continue to increase the propensity of enzyme destabilization thus shortening their industrial lifespan namely enzyme leaching, recoverability, uncontrollable orientation and the lack of a general procedure. Innovative studies have strived to provide new tools and materials for the development of systems offering new possibilities for industrial applications of enzymes. Herein, an effort has been made to present up-to-date developments on enzyme immobilization and current challenges in the food and beverage industries in terms of enhancing the enzyme stability.

Recent advances in β-galactosidase and fructosyltransferase immobilization technology

The highly demanding conditions of industrial processes may lower the stability and affect the activity of enzymes used as biocatalysts. Enzyme immobilization emerged as an approach to promote stabilization and easy removal of enzymes for their reusability. The aim of this review is to go through the principal immobilization strategies addressed to achieve optimal industrial processes with special care on those reported for two types of enzymes: β-galactosidases and fructosyltransferases. The main methods used to immobilize these two enzymes are adsorption, entrapment, covalent coupling and cross-linking or aggregation (no support is used), all of them having pros and cons. Regarding the support, it should be cost-effective, assure the reusability and an easy recovery of the enzyme, increasing its stability and durability. The discussion provided showed that the type of enzyme, its origin, its purity, together with the type of immobilization method and the support will affect the performance during the enzymatic synthesis. Enzymes' immobilization involves interdisciplinary knowledge including enzymology, nanotechnology, molecular dynamics, cellular physiology and process design. The increasing availability of facilities has opened a variety of possibilities to define strategies to optimize the activity and re-usability of β-galactosidases and fructosyltransferases, but there is still great place for innovative developments.