Occupational Exposure to Metal Fumes Among Iranian Welders: Systematic Review and Simulation-Based Health Risk Assessment

Application of Multiple Occupational Health Risk Assessment Models for Metal Fumes in Welding Process

Welding fumes have an important role to create the adverse health effects. So, the aim of this study was to use of multiple occupational health risk assessment models for metal fumes in welding process. This cross-sectional study was conducted among welding workers. Sampling of heavy metals such as Sn, Zn, Al, Fe, Cd, Pb, Cu, Mn, Ni, Cr, and As was provided based on the National Institute for Occupational Safety and Health (NIOSH) method 7300 and analyzed by inductively coupled plasma mass spectroscopy (ICP-MS). Risk assessment was managed by four methods including Malaysia's method, Control of Substances Hazardous to Health Essentials (COSHH model), Chinese OHRA standard (GBZ/T 298-2017), and EPA method. Also, Monte Carlo simulation was used to examine the uncertainties by using the Crystal Ball tool. To compare the models, the risk levels of each model were converted into the risk ratio and the SPSS 22.0 software was used to the statistical analysis. The consistency of the two occupational health risk assessment models was examined by Cohen's Kappa. Risk ration was the highest level for Cr (VI) fumes in all models. Also, carcinogenic risk was unacceptable for all examined fumes. Moreover, non-carcinogenic risk was the highest (HI > 1) for As fumes. Mont Carlo simulations suggested that exposure time (ET) had a significant effect on the risk. Also, there was a good consistency between Malaysia method/GBZ/T 298-2017 and COSHH model/GBZ/T 298-2017. Therefore, it is recommended that the engineering and administrative controls should be provided to reduce exposure.

Cadmium-induced Carcinogenesis in Respiratory Organs and the Prostate: Insights from Three Perspectives on Toxicogenomic Approach

Cadmium (Cd) exposure primarily occurs through inhalation, either by smoking or occupational exposure to contaminated air. Upon inhalation, Cd ultimately reaches the prostate through the bloodstream. In this review, we investigate the carcinogenic potential of Cd in both respiratory organs and the prostate. Specifically, this review examines cellular metabolism, comprehensive toxicity, and carcinogenic mechanisms by exploring gene ontology, biological networks, and adverse outcome pathways. In the respiratory organs, Cd induces lung cancer by altering the expression of IL1B and FGF2, causing DNA damage, reducing cell junction integrity, and promoting apoptosis. In the prostate, Cd induces prostate cancer by modifying the expression of EDN1 and HMOX1, leading to abnormal protein activities and maturation, suppressing tumor suppressors, and inducing apoptosis. Collectively, this review provides a comprehensive understanding of the carcinogenic mechanisms of Cd in two different organs by adopting toxicogenomic approaches. These insights can serve as a foundation for further research on cadmium-induced cancer, contributing to the establishment of future cancer prevention strategies.

Carcinogenic and non-carcinogenic risk of exposure to metal fume in different types of welding processes

The international agency for cancer research (IARC) has classified welding fumes as definitive carcinogens. The aim of the present study was to assess health risk due to exposure to welding fumes in different welding types. In this study, exposure to fumes of iron (Fe), chromium (Cr), and nickel (Ni) in the breathing zone air of 31 welder engaged in arc, argon and CO₂ welding was assessed. Carcinogenic and non-carcinogenic risk assessments due to exposure to fumes were performed using the method proposed by the Environmental Protection Agency (EPA) by Monte Carlo simulation. The results showed that in the CO₂ welding, concentration of Ni, Cr, and Fe was lower than the 8-h Time-Weighted Average Threshold Limit Value (TWA-TLV), recommended by the American Conference of Governmental Industrial Hygienists (ACGIH). In argon welding, Cr and Fe concentrations were higher than the TWA-TLV. In arc welding, concentrations of Ni and Fe were more than the TWA-TLV. In addition, the risk of non-carcinogenicity due to exposure to Ni and Fe in all three types of welding was more than standard level (HQ>1). The results indicated that the welders are at health risk due to exposure to metal fumes. Preventive exposure control measures such as local ventilation need to be implemented in welding workplaces.

The simulation of the emission of iron fumes caused by shielded metal arc welding using a computational fluid dynamics method

Computational fluid dynamics (CFD) is an indispensable simulation tool for predicting the emission of pollutants in the work environment. Welding is one of the most common industrial processes that might expose the operators and surrounding workers to certain hazardous gaseous metal fumes. In the present study, we used computational fluid dynamics (CFD) methodology for simulating the emission of iron fumes from the shielded metal arc welding (SMAW) procedure. A galvanized steel chamber was fabricated to measure the pollutant concentration and identify the size of the fume created by the SMAW. Then, the emission of welding aerosol was simulated using a method of computational fluid-particle dynamics with the ANSYS 2020 R1 software. The highest amount of welding fumes concentration was related to iron fumes (i.e., 3045 μg/m³ with a diameter of 0.25 μm). The results of the current study indicated that the local exhaust and general ventilation system can prevent the spreading of welding fumes to the welder's breathing zone and the surrounding environment. CFD was also found to be an efficient method for predicting the emission of the iron fumes created by SMAW as well as for selecting an appropriate ventilation system. However, further studies that take the modeling of welding-generated emission of additional metal particles and gases into account will need to be undertaken.