Extraction of Antioxidants from Aloe vera Leaf Gel: a Response Surface Methodology Study

Production and Characterization of Silk Fibroin-Aloe vera Hydrogel: A Study on Extraction, Hydrogel Properties, and Release Mechanism

This work investigated the production and characterization of a silk fibroin (SF) hydrogel incorporated with an Aloe vera (AV) extract. Four extraction methods, ultrasound-assisted extraction with bath and probe, stirring, and Soxhlet, were tested, while the hydrogel was produced by a one-step freeze-thaw method. Besides the extraction yield, the antioxidant capacity of the extracts was accessed, which allowed to select the extract obtained by ultrasound-assisted extraction to be incorporated into the hydrogels. Hydrogels were characterized by scanning electron microscopy and Fourier transform infrared spectroscopy. Rheological assay, swelling behavior, and water uptake capacity were measured. The SF-AV hydrogel was submitted to release test, and the data were mathematically modeled. The hydrogels exhibited malleability, insolubility in water, interconnected pores, and thermal and physical stability. The SF-AV hydrogel released 37% extract over 330 min, with diffusion controlled by the Fickian mechanism. These promising results make the SF-AV hydrogel an attractive choice for wound dressing and other biomaterial-related applications.

Flash extraction of ulvan polysaccharides from marine green macroalga Ulva linza and evaluation of its antioxidant and gut microbiota modulation activities

In this study, flash extraction was used to rapidly extract water-soluble polysaccharides from Ulva linza. The optimal extraction process for the flash extraction was determined by Box-Behnken design with extraction temperature 80 °C, extraction time 117 s, liquid-solid ratio 46:1 (mL/g) and a corresponding yield of 18.5 %. The crude Ulva linza polysaccharides (CULP) were subsequently isolated by chromatography technology to obtain purified Ulva linza polysaccharide (ULP) and characterized by monosaccharide composition and molecular weight determination analysis. Furthermore, the antioxidant bioactivity of ULP was studied and the results revealed that it had a good scavenging effect on DPPH, ABTS and OH, with IC50 values of 149.2 μg/mL, 252.5 μg/mL and 1073 μg/mL, respectively. After in vitro fermentation by human fecal microbiota, the pH value of fermentation culture significantly decreased to 5.06, suggesting that ULP could be hydrolyzed and utilized by gut microbiota. The abundance of beneficial bacteria including Bacteroides, Parabacteroides and Faecalibacterium was improved. Meanwhile, the relative abundance of Prevotella, Blautia and Ruminococcus was decreased, and the low ratio of these organisms might reveal positive effects on maintaining the balance of gut microbial biodiversity. These results suggested that the composition of the human gut microbiota could be modulated by ULP, and ULP might possess the potential to maintain gut homeostasis and improve human intestinal health.

Valorization of Aloe vera Skin By-Products to Obtain Bioactive Compounds by Microwave-Assisted Extraction: Antioxidant Activity and Chemical Composition

Aloe vera skin (AVS) is a major by-product of Aloe processing plants all over the world. In this study, response surface methodology was used to optimize microwave-assisted extraction (MAE) of bioactive compounds from AVS. The influence of extraction parameters, such as ethanol concentration (%Et), extraction temperature (T), time (t) and solvent volume (V), on extraction yield (Y), total phenolic content (TPC), antioxidant activity (DPPH and FRAP methods) and aloin content, was studied. Optimum extraction conditions were determined as 80% ethanol, 80 °C, 36.6 min and 50 mL and optimized extracts showed interesting contents of polyphenols and antioxidant performance. The phenolic profile was determined by HPLC-DAD/MS and some major phenolic compounds, such as aloin A, aloin B, aloesin, aloe-emodin, aloeresin D, orientin, cinnamic acid and chlorogenic acid, were quantified while eight other compounds were tentatively identified. Moreover, structural and thermal properties were studied by FTIR and TGA analyses, respectively. The obtained results suggested the potential of AVS as a promising source of bioactive compounds, thus increasing the added value of this agricultural waste.

Extraction of Aloesin from Aloe vera Rind Using Alternative Green Solvents: Process Optimization and Biological Activity Assessment

Simple Summary

Aloesin is a bioactive constituent of Aloe spp. used primarily in cosmetic products. Its recovery from plant materials is affected by several variables that can compromise the process yield and profitability, which is why it is necessary to determine the best processing conditions. This study describes the design and optimization of a method for extraction of aloesin from Aloe vera rind, a leaf part often discarded as a by-product, using the response surface methodology. The effect of the variables time, temperature, solvent composition, and solid/liquid ratio were investigated. Green organic solvents (ethanol, propylene glycol, and glycerol) were used in aqueous mixtures. Aqueous propylene glycol was found to be the most promising solvent for aloesin recovery and a linear increase in extraction yields was verified with the increase in solid/liquid ratio. To assess the bioactivity of the extracts, their ability to inhibit lipid peroxidation and the fungal and bacterial growth, as well as their cytotoxic potential, was tested in vitro. Overall, it was possible to determine the best extraction conditions for aloesin and to better understand the antioxidant and antimicrobial properties of the aloesin-rich extracts, which may be produced and used by the industrial sector.

Abstract

Aloesin is an aromatic chromone with increasing applications in the cosmetic and health food industries. To optimize its extraction from the Aloe vera leaf rind, the independent variables time (10–210 min), temperature (25–95 °C) and organic solvent composition (0–100%, w/w) were combined in a central composite design coupled with response surface methodology. The solvents consisted of binary mixtures of water with ethanol, propylene glycol, or glycerol. The aloesin levels quantified in each extract were used as response for optimization. The theoretical models were fitted to the experimental data, statistically validated, and used to obtain the optimal extraction conditions. Then, a dose–response analysis of the solid/liquid ratio (S/L) was performed under the optimal conditions determined for each alcohol–water system and revealed that a linear improvement in extraction efficiency can be achieved by increasing the S/L ratio by up to 40 g/L. This analysis also allowed to experimentally validate the predictive models. Furthermore, the aloesin-rich extracts revealed antioxidant activity through thiobarbituric acid reactive substances (TBARS) formation inhibition, antimicrobial effects against bacterial and fungal strains, and no toxicity for PLP2 cells. Overall, this study provided optimal extraction conditions for the recovery of aloesin from Aloe vera rind through an eco-friendly extraction process and highlighted its bioactive potential.

Encapsulation of Bioactive Compounds from Aloe Vera Agrowastes in Electrospun Poly (Ethylene Oxide) Nanofibers

Aloe Vera is an ancient medicinal plant especially known for its beneficial properties for human health, due to its bioactive compounds. In this study, nanofibers with antioxidant activity were successfully obtained by electrospinning technique with the addition of a natural Aloe Vera skin extract (AVE) (at 0, 5, 10 and 20 wt% loadings) in poly(ethylene oxide) (PEO) solutions. The successful incorporation of AVE into PEO was evidenced by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (ATR-FTIR), thermogravimetric analysis (TGA) and antioxidant activity by 2,2-diphenyl-1-picrylhydrazyl radical scavenging (DPPH), 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonic acid) radical scavenging (ABTS) and ferric reducing power (FRAP) assays. The incorporation of AVE introduced some changes in the PEO/AVE nanofibers morphology showing bimodal diameter distributions for AVE contents in the range 10-20 wt%. Some decrease in thermal stability with AVE addition, in terms of decomposition onset temperature, was also observed and it was more evident at high loading AVE contents (10 and 20 wt%). High encapsulation efficiencies of 92%, 76% and 105% according to DPPH, FRAP and ABTS assays, respectively, were obtained at 5 wt% AVE content, retaining AVE its antioxidant capacity in the PEO/AVE electrospun nanofibers. The results suggested that the obtained nanofibers could be promising materials for their application in active food packaging to decrease oxidation of packaged food during storage.