Microfluidics for Applications in Cell Mechanics and Mechanobiology

Microdevice-based mechanical compression on living cells

Compressive stress enables the investigation of a range of cellular processes in which forces play an important role, such as cell growth, differentiation, migration, and invasion. Such solid stress can be introduced externally to study cell response and to mechanically induce changes in cell morphology and behavior by static or dynamic compression. Microfluidics is a useful tool for this, allowing one to mimic in vivo microenvironments in on-chip culture systems where force application can be controlled spatially and temporally. Here, we review the mechanical compression applications on cells with a broad focus on studies using microtechnologies and microdevices to apply cell compression, in comparison to off-chip bulk systems. Due to their unique features, microfluidic systems developed to apply compressive forces on single cells, in 2D and 3D culture models, and compression in cancer microenvironments are emphasized. Research efforts in this field can help the development of mechanoceuticals in the future.

Measuring the density and viscosity of culture media for optimized computational fluid dynamics analysis of in vitro devices

Culture medium is frequently modelled as water in computational fluid dynamics (CFD) analysis of in vitro culture systems involving flow, such as bioreactors and organ-on-chips. However, culture medium can be expected to have different properties to water due to its higher solute content. Furthermore, cellular activities such as metabolism and secretion of ECM proteins alter the composition of culture medium and therefore its properties during culture. As these properties directly determine the hydromechanical stimuli exerted on cells in vitro, these, along with any changes during culture must be known for CFD modelling accuracy and meaningful interpretation of cellular responses. In this study, the density and dynamic viscosity of DMEM and RPMI-1640 media supplemented with typical concentrations of foetal bovine serum (0, 5, 10 and 20% v/v) were measured to serve as a reference for computational design analysis. Any changes in the properties of medium during culture were also investigated with NCI-H460 and HN6 cell lines. The density and dynamic viscosity of the media increased proportional to the % volume of added foetal bovine serum (FBS). Importantly, the viscosity of 5% FBS-supplemented RPMI-1640 was found to increase significantly after 3 days of culture of NCI-H460 and HN6 cell lines, with distinct differences between magnitude of change for each cell line. Finally, these experimentally-derived values were applied in CFD analysis of a simple microfluidic device, which demonstrated clear differences in maximum wall shear stress and pressure between fluid models. Overall, these results highlight the importance of characterizing model-specific properties for CFD design analysis of cell culture systems.

Systematic Review: Microfluidics and Plasmodium

Malaria affects 228 million people worldwide each year, causing severe disease and worsening the conditions of already vulnerable populations. In this review, we explore how malaria has been detected in the past and how it can be detected in the future. Our primary focus is on finding new directions for low-cost diagnostic methods that unspecialized personnel can apply in situ. Through this review, we show that microfluidic devices can help pre-concentrate samples of blood infected with malaria to facilitate the diagnosis. Importantly, these devices can be made cheaply and be readily deployed in remote locations.

High-throughput microfluidic compressibility cytometry using multi-tilted-angle surface acoustic wave

Cellular mechanical properties (e.g. compressibility) are important biophysical markers in relation to cellular processes and functionality. Among the methods for cell mechanical measurement, acoustofluidic methods appear to be advantageous due to tunability, biocompatibility and acousto-mechanical nature. However, the previous acoustofluidic methods were limited in throughput and number of measurements. In this study, we developed a high-throughput microfluidic compressibility cytometry approach using multi-tilted-angle surface acoustic wave, which can provide thousands of single-cell compressibility measurements within minutes. The compressibility cytometer was constructed to drag microparticles or cells towards the microfluidic channel sidewall at different segments based on their biophysical properties (such as size and compressibility), as a result of the varied balance between acoustics and flow. Mathematical analysis and computational simulation revealed that the compressibility of a cell could be estimated from the position of collision with the sidewall. Microbeads of different materials and sizes were experimentally tested to validate the simulation and to demonstrate the capability to characterise size and compressibility. MDA MB231 cells, of the triple negative breast cancer subtype, were treated with the microtubule disrupting agent colchicine which increased compressibility and treated with the actin disrupting agent cytochalasin B which increased cell size but did not change compressibility. Moreover, the highly metastatic variant MDA MB231 LNm5 cell line showed increased compressibility compared to the parent MDA MB231 cells, indicating the potential utility of high-throughput mechanophenotyping for tumour cell characterisation.

Automated Cell Mechanical Characterization by On-Chip Sequential Squeezing: From Static to Dynamic

The mechanical properties of cells are harmless biomarkers for cell identification and disease diagnosis. Although many systems have been developed to evaluate the static mechanical properties of cells for biomedical research, their robustness, effectiveness, and cost do not meet clinical requirements or the experiments with a large number of cell samples. In this paper, we propose an approach for on-chip cell mechanical characterization by analyzing the dynamic behavior of cells as they pass through multiple constrictions. The proposed serpentine microfluidic channel consisted of 20 constrictions connected in series and divided into five rows for tracking cell dynamic behavior. Assisted by computer vision, the squeezing time of each cell through five rows of constrictions was automatically collected and filtered to evaluate the cell's mechanical deformability. We observed a decreasing passage time and increasing dynamic deformability of the cells as they passed through the multiple constrictions. The deformability increase rate of the HeLa cells was eight times greater than that of MEF cells. Moreover, the weak correlation between the deformability increase rate and the cell size indicated that cell recognition based on measuring the deformability increase rate could hardly be affected by the cell size variation. These findings showed that the deformability increase rate of the cell under on-chip sequential squeezing as a new index has great potential in cancer cell recognition.

Label-Free Multivariate Biophysical Phenotyping-Activated Acoustic Sorting at the Single-Cell Level

Biophysical markers of cells such as cellular electrical and mechanical properties have been proven as promising label-free biomarkers for studying, characterizing, and classifying different cell types and even their subpopulations. Further analysis or manipulation of specific cell types or subtypes requires accurate isolation of them from the original heterogeneous samples. However, there is currently a lack of cell sorting ability that could actively separate a large number of individual cells at the single-cell level based on their multivariate biophysical makers or phenotypes. In this work, we, for the first time, demonstrate label-free and high-throughput acoustic single-cell sorting activated by the characterization of multivariate biophysical phenotypes. Electrical phenotyping is implemented by single-cell electrical impedance characterization with two pairs of differential sensing electrodes, while mechanical phenotyping is performed by extracting the transit time for the single cell to pass through microconstriction from the recorded impedance signals. A real-time impedance signal processing and triggering algorithm has been developed to identify the target sample population and activate a pulsed highly focused surface acoustic wave for single-cell level sorting. We have demonstrated acoustic single-particle sorting solely based on electrical or mechanical phenotyping. Furthermore, we have applied the developed microfluidic system to sort live MCF-7 cells from a mixture of fixed and live MCF-7 population activated by a combined electrical and mechanical phenotyping at a high throughput >100 cells/s and purity ∼91.8%. This demonstrated ability to analyze and sort cells based on multivariate biophysical phenotyping provides a solution to the current challenges of cell purification that lack specific molecular biomarkers.

Multi-corneal barrier-on-a-chip to recapitulate eye blinking shear stress forces

Human corneal epithelium coexists with tear fluids and shows its barrier functionality under the dynamic conditions of eye blinking. However, the current in vitro cell culture settings for corneal epithelial cells lack the dynamic flow conditions to recapitulate the shear stress of eye blinking, hindering corneal function evaluation. We developed a microfluidic platform enabling the dynamic culture of the human corneal barrier with recapitulation of eye blinking. The device consisted of upper and lower channels separated by a porous membrane. Human corneal epithelial cells (HCE-T) were seeded on the porous membrane (upper channel) and cultured for ten days. The cells formed a barrier with high expression of zonula occludens 1 (ZO-1) tight junction protein on day seven, and the translocation of fluorescein sodium across the barrier in the microfluidic device was comparable to that in the transwell system, used as a control. Then, bidirectional and unidirectional flows were applied in the upper and lower channels, respectively, and the cells in the upper channels were stimulated with 0.6 dyn s cm^-2 shear stress. After 24 h, while the fluid stimuli did not affect cell adhesion, they facilitated the expression of cytokeratin 19 (CK-19) intermediate filaments in cells, indicating the strengthening of the barrier function. Furthermore, morphological single-cell analysis revealed an increase in the cell body area rather than nuclei. We envision that this multi-corneal barrier-on-a-chip device will unlock new possibilities in ophthalmic drug development and will be useful for studying the effects of eye blinking shear stress on the ocular surface.

Numerical Investigations of Hepatic Spheroids Metabolic Reactions in a Perfusion Bioreactor

Miniaturized culture systems of hepatic cells are emerging as a strong tool facilitating studies related to liver diseases and drug discovery. However, the experimental optimization of various parameters involved in the operation of these systems is time-consuming and expensive. Hence, developing numerical tools predicting the function of such systems can significantly reduce the associated cost. In this paper, a perfusion-based three dimensional (3D) bioreactor comprising encapsulated human liver hepatocellular carcinoma (HepG2) spheroids are analyzed. The flow and mass transfer equations for oxygen as well as different metabolites such as albumin, glucose, glutamine, ammonia, and urea were solved in three different domains, i.e., free flow, hydrogel, and spheroid porous media sections. Since the spheroids were encapsulated inside the hydrogel, shear stress imposed on them were found to be less than tolerable thresholds. The predicted cumulative albumin concentration over the 7 days of culture period showed a good agreement with the experimental data. Based on the critical role of oxygen supply to the hepatocytes, a parametric study was performed and the effect of various parameters was investigated. Results illustrated that convection mechanism was the dominant transport mechanism in the main-stream section contrary to the intra spheroids parts where the diffusion was the prevailing transport mechanism. In the hydrogel parts, the rate of diffusion and convection mechanisms were almost identical. As expected, higher perfusion rate would provide high oxygen level for the cells and, smaller spheroids with a diameter of 100 μm were at the low risk of hypoxic conditions due to short diffusive oxygen penetration depth. Numerical results evidenced that spheroids with diameter size >200 μm at low porosities (ε = 0.2-0.3) were at risk of oxygen depletion, especially at locations near the core center. Therefore, these results could be beneficial in preventing hypoxic conditions during in vitro experiments. The presented numerical model provides a numerical platform which can help researchers to design and optimize complex bioreactors and obtain numerical indexes of the main metabolites in a very short time prior to any fabrications. Such numerical indexes can be helpful in certifying the outcomes of forensic investigations.

Cell trapping in Y-junction microchannels: A numerical study of the bifurcation angle effect in inertial microfluidics

The majority of microfluidic technologies for cell sorting and isolation involve bifurcating (e.g., Y- or T-shaped junction) microchannels to trap the cells of a specific type. However, the microfluidic trapping efficiency remains low, independently of whether the cells are separated by a passive or an active sorting method. Using a custom computational algorithm, we studied the migration of separated deformable cells in a Y-junction microchannel, with a bifurcation angle ranging from 30° to 180°. Single or two cells of initially spherical shape were considered under flow conditions corresponding to inertial microfluidics. Through the numerical simulation, we identified the effects of cell size, cytoplasmic viscoelasticity, cortical tension, flow rate, and bifurcation angle on the critical separation distance for cell trapping. The results of this study show that the trapping and isolation of blood cells, and circulating tumor cells in a Y-junction microchannel was most efficient and least dependent on the flow rate at the bifurcation angle of 120°. At this angle, the trapping efficiency for white blood cells and circulating tumor cells increased, respectively, by 46% and 43%, in comparison with the trapping efficiency at 60°. The efficiency to isolate invasive tumor cells from noninvasive ones increased by 32%. This numerical study provides important design criteria to optimize microfluidic technology for deformability-based cell sorting and isolation.

Integrated cancer tissue engineering models for precision medicine

Tumors are not merely cancerous cells that undergo mindless proliferation. Rather, they are highly organized and interconnected organ systems. Tumor cells reside in complex microenvironments in which they are subjected to a variety of physical and chemical stimuli that influence cell behavior and ultimately the progression and maintenance of the tumor. As cancer bioengineers, it is our responsibility to create physiologic models that enable accurate understanding of the multi-dimensional structure, organization, and complex relationships in diverse tumor microenvironments. Such models can greatly expedite clinical discovery and translation by closely replicating the physiological conditions while maintaining high tunability and control of extrinsic factors. In this review, we discuss the current models that target key aspects of the tumor microenvironment and their role in cancer progression. In order to address sources of experimental variation and model limitations, we also make recommendations for methods to improve overall physiologic reproducibility, experimental repeatability, and rigor within the field. Improvements can be made through an enhanced emphasis on mathematical modeling, standardized in vitro model characterization, transparent reporting of methodologies, and designing experiments with physiological metrics. Taken together these considerations will enhance the relevance of in vitro tumor models, biological understanding, and accelerate treatment exploration ultimately leading to improved clinical outcomes. Moreover, the development of robust, user-friendly models that integrate important stimuli will allow for the in-depth study of tumors as they undergo progression from non-transformed primary cells to metastatic disease and facilitate translation to a wide variety of biological and clinical studies.

Matrix elasticity regulates mesenchymal stem cell chemotaxis

Efficient homing of human mesenchymal stem cells (hMSCs) is likely to be dictated by a combination of physical and chemical factors present in the microenvironment. However, crosstalk between the physical and chemical cues remains incompletely understood. Here, we address this question by probing the efficiency of epidermal growth factor (EGF)-induced hMSC chemotaxis on substrates of varying stiffness (3, 30 and 600 kPa) inside a polydimethylsiloxane (PDMS) microfluidic device. Chemotactic speed was found to be the sum of a stiffness-dependent component and a chemokine concentration-dependent component. While the stiffness-dependent component scaled inversely with stiffness, the chemotactic component was independent of stiffness. Faster chemotaxis on the softest 3 kPa substrates is attributed to a combination of weaker adhesions and higher protrusion rate. While chemotaxis was mildly sensitive to contractility inhibitors, suppression of chemotaxis upon actin depolymerization demonstrates the role of actin-mediated protrusions in driving chemotaxis. In addition to highlighting the collective influence of physical and chemical cues in chemotactic migration, our results suggest that hMSC homing is more efficient on softer substrates.

A Parallel-Plate Flow Chamber for Mechanical Characterization of Endothelial Cells Exposed to Laminar Shear Stress

Shear stresses induced by laminar fluid flow are essential to properly recapitulate the physiological microenvironment experienced by endothelial cells (ECs). ECs respond to these stresses via mechanotransduction by modulating their phenotype and biomechanical characteristics, which can be characterized by Atomic Force Microscopy (AFM). Parallel Plate Flow Chambers (PPFCs) apply unidirectional laminar fluid flow to EC monolayers in vitro. Since ECs in sealed PPFCs are inaccessible to AFM probes, cone-and-plate viscometers (CPs) are commonly used to apply shear stress. This paper presents a comparison of the efficacies of both methods. Computational Fluid Dynamic simulation and validation testing using EC responses as a metric have indicated limitations in the use of CPs to apply laminar shear stress. Monolayers subjected to laminar fluid flow in a PPFC respond by increasing cortical stiffness, elongating, and aligning filamentous actin in the direction of fluid flow to a greater extent than CP devices. Limitations using CP devices to provide laminar flow across an EC monolayer suggest they are better suited when studying EC response for disturbed flow conditions. PPFC platforms allow for exposure of ECs to laminar fluid flow conditions, recapitulating cellular biomechanical behaviors, whereas CP platforms allow for mechanical characterization of ECs under secondary flow.

Nanotopography as a trigger for the microscale, autogenous and passive lysis of erythrocytes

A mechano-responsive topology provides a highly active yet autogenous surface for erythrocyte lysis towards microfluidic haematology platforms.

Mechanoregulation of stem cell fate via micro-/nano-scale manipulation for regenerative medicine

Recent developments in the field of mechanobiology have renewed the call for a better understanding of the role of mechanical forces as potent regulators and indicators of stem cell fate. Although it is well established that mechanical forces play a crucial role in guiding tissue development, little is known about how submicroscopic biomechanical forces can influence key stem cell behaviors. This review will detail the use of micro-/nano-technologies that are advancing our current understanding of stem cell mechanobiology, and mechanoregulation of stem cell fate using engineered surface topographies and small-scale patterning techniques. The involvement of focal adhesions and the cytoskeleton systems as a common biophysical impetus through which these mechanical signals are transduced via distinct signaling pathways will also be discussed. These insights are envisioned to provide the basis for the rational design of future biocompatible materials and may inspire alternative drug-free therapeutic strategies to manage diseased sites via biomechanical management.

Microfluidic platforms for mechanobiology

Mechanotransduction has been a topic of considerable interest since early studies demonstrated a link between mechanical force and biological response. Until recently, studies of fundamental phenomena were based either on in vivo experiments with limited control or direct access, or on large-scale in vitro studies lacking many of the potentially important physiological factors. With the advent of microfluidics, many of the previous limitations of in vitro testing were eliminated or reduced through greater control or combined functionalities. At the same time, imaging capabilities were tremendously enhanced. In this review, we discuss how microfluidics has transformed the study of mechanotransduction. This is done in the context of the various cell types that exhibit force-induced responses and the new biological insights that have been elucidated. We also discuss new microfluidic studies that could produce even more realistic models of in vivo conditions by combining multiple stimuli or creating a more realistic microenvironment.

Microdevices for nanomedicine

This review surveys selected methods of manufacture and applications of microdevices-miniaturized functional devices capable of handling cell and tissue cultures or producing particles-and discusses their potential relevance to nanomedicine. Many characteristics of microdevices such as miniaturization, increased throughput, and the ability to mimic organ-specific microenvironments are promising for the rapid, low-cost evaluation of the efficacy and toxicity of nanomaterials. Their potential to accurately reproduce the physiological environments that occur in vivo could reduce dependence on animal models in pharmacological testing. Technologies in microfabrications and microfluidics are widely applicable for nanomaterial synthesis and for the development of diagnostic devices. Although the use of microdevices in nanomedicine is still in its infancy, these technologies show promise for enhancing fundamental and applied research in nanomedicine.

Microfluidic probes for use in life sciences and medicine

Microfluidic probes (MFPs) combine the concepts of microfluidics and of scanning probes and constitute a contact-free and channel-free microfluidic system. Whereas classically the sample is introduced into the microfluidic device, with a MFP, the microfluidic stream is applied to the sample. MFPs use hydrodynamic flow confinement instead of walls to constrain a microfluidic stream between the MFP tip and a substrate. Because MFPs are free to move, they can be used to process large areas and samples in a selective manner. The development of MFP technology is recent and has numerous potential applications in several fields, most notably in the life sciences. In this review, we discuss the concept of MFPs and highlight their application in surface biopatterning, controlling the cellular microenvironments, local processing of tissue slices, and generating concentration gradients of biochemicals. We hope that this manuscript will serve as an interdisciplinary guide for both engineers as they further develop novel MFPs and applications and for life scientists who may identify novel uses of the MFP for their research.

Single cell rheometry with a microfluidic constriction: Quantitative control of friction and fluid leaks between cell and channel walls

We report how cell rheology measurements can be performed by monitoring the deformation of a cell in a microfluidic constriction, provided that friction and fluid leaks effects between the cell and the walls of the microchannels are correctly taken into account. Indeed, the mismatch between the rounded shapes of cells and the angular cross-section of standard microfluidic channels hampers efficient obstruction of the channel by an incoming cell. Moreover, friction forces between a cell and channels walls have never been characterized. Both effects impede a quantitative determination of forces experienced by cells in a constriction. Our study is based on a new microfluidic device composed of two successive constrictions, combined with optical interference microscopy measurements to characterize the contact zone between the cell and the walls of the channel. A cell squeezed in a first constriction obstructs most of the channel cross-section, which strongly limits leaks around cells. The rheological properties of the cell are subsequently probed during its entry in a second narrower constriction. The pressure force is determined from the pressure drop across the device, the cell velocity, and the width of the gutters formed between the cell and the corners of the channel. The additional friction force, which has never been analyzed for moving and constrained cells before, is found to involve both hydrodynamic lubrication and surface forces. This friction results in the existence of a threshold for moving the cells and leads to a non-linear behavior at low velocity. The friction force can nevertheless be assessed in the linear regime. Finally, an apparent viscosity of single cells can be estimated from a numerical prediction of the viscous dissipation induced by a small step in the channel. A preliminary application of our method yields an apparent loss modulus on the order of 100 Pa s for leukocytes THP-1 cells, in agreement with the literature data.