23 Full Factorial Design for Formulation and Evaluation of Floating Oral In Situ Gelling System of Piroxicam

Optimization and preparation of in-situ mucoadhesive gel of azithromycin hydroxypropyl-β-cyclodextrin inclusion complex against upper respiratory tract infections

BACKGROUND

Azithromycin (ATM) has limitations, such as poor oral bioavailability and gastrointestinal (GI) side effects that restrict its widespread application.

OBJECTIVE

To develop a localized hydroxy propyl β-cyclodextrin (HP-βCD) inclusion complex-based in situ pH-responsive mucoadhesive gel of azithromycin (ATM) and evaluate its performance for the treatment of upper respiratory tract infections (URTIs).

METHODS

According to the phase solubility diagram, the ATM HP-βCD complex was prepared and analyzed by FT-IR, DSC, and SEM. Then, using a quality-by-design approach, pH-responsive in-situ gel was prepared. It was characterized in terms of their gelling capacity, pH, spreadability, swelling index, rheological properties and antimicrobial potential.

RESULTS

ATM HP- βCD complex 20-fold increased solubility of ATM, i.e., 49.84 ± 1.39 µg/mL with improved dissolution profile compared to pure ATM. Optimized formulation characterized by its gelation pH (6.7), time (1.59 min), and viscosity (1607.9 Pa.s). The developed gel showed a good spreadability index (322.6 ± 0.5%), swelling index (98.26 ± 1.54% after 10 h) and mucoadhesive strength (589 g/cm2). Also, it exhibits a sustained drug release profile for 12 h(94 ± 1.37%) and a broader zone of Staphylococcus aureus growth inhibition (31 ± 3.54 mm).

CONCLUSION

The developed mucoadhesive in situ gels demonstrated promising in vivo performance, primarily due to their effective antimicrobial activity. In vivo, local retention studies confirmed that the formulations adhered to the throat mucosa and remained in place for up to 24 h after application. The findings presented here suggested that this localized delivery system could serve as a useful strategy for improving the therapeutic effects of ATM against URTIs.

Sabry S, Mansour SMG, El-Nahas HM, Ayoub MM. Experimental Investigation into the Design, Optimization, Toxicity, and Anti-Viral Efficacy of Proliposomes Loaded with Ivermectin Against Infectious Bronchitis Virus Using an Embryonated Chicken Egg Model

Background: Infectious bronchitis virus (IBV) causes a significant illness in birds, making it a leading source of financial loss in the poultry business. The objective of this study was to assess the effectiveness of proliposomes (PLs) containing ivermectin (IVM) against IBV using embryonated chicken eggs (ECEs). Methods: A three-factor, two-level (23) full factorial design was employed; carrier/lipid phase ratio (A), stearyl glycyrrhetinate amount (B), and phospholipid type (C) were studied as independent variables, while product yield (PY), entrapment efficiency (EE), particle size (PS), polydispersity index (PDI), zeta potential (ZP), and cumulative percentage of drug released after 6 h (Q6h) were characterized. The selected formulations (PL2 and PL6) were subjected to further characterizations, including IVM toxicity and anti-viral activity. Results: The PY% ranged from 88.6 ± 2.19% to 98.8 ± 0.45%, EE% was from 71.8 ± 2.01% to 96.1 ± 0.51%, PS was from 330.1 ± 55.65 nm to 1801.6 ± 45.61 nm, PDI was from 0.205 ± 0.06 to 0.603 ± 0.03, ZP was from -18.2 ± 0.60 mV to -50.1 ± 1.80 mV, and Q6h was from 80.95 ± 1.36% to 88.79 ± 2.03%. IVM-loaded PLs had lower toxicity in ECEs than pure IVM; the mortality rate was substantially reduced in IBV-infected ECEs injected with PL2 rather than pure IVM. As further evidence of IVM's anti-viral action against IBV, quantitative real-time polymerase chain reaction (qRT-PCR) revealed that the PL2-treated group exhibited further reduction in IBV's copies in comparison with the pure IVM-treated group. Conclusions: PLs loaded with IVM are an innovative and potentially effective way to inhibit IBV.

Sabry S, El-Nahas HM, Ayoub MM. Maximizing the Use of Ivermectin Transethosomal Cream in the Treatment of Scabies

In an effort to tackle the skin reactions frequently observed with topical application of ivermectin (IVM), a study was conducted to develop and optimize transethosomes (TESMs) loaded with IVM for scabies treatment. A three-factor, two-level (23) full factorial design was employed. Soyabean phosphatidylcholine concentration (A), ethanol concentration (B) and Span 60 amount (C) were studied as independent factors, while entrapment efficiency (EE), particle size (PS), polydispersity index (PDI), zeta potential (ZP) and drug release after 6 h (Q6h) were characterized. The skin sensitivity of the optimized formulation was evaluated by skin irritation test and histopathological examination. The EE% ranged from 88.55 ± 0.576% to 94.13 ± 0.305%, PS was from 318.033 ± 45.61 nm to 561.400 ± 45.17 nm, PDI was from 0.328 ± 0.139 to 0.671 ± 0.103, ZP was from -54.13 ± 1.09 mV to -60.50 ± 2.34 mV and Q6h was from 66.20 ± 0.30% to 93.46 ± 0.86%. The IVM-loaded transethosomal cream showed lower skin irritation and a more intact epidermal layer with intact keratinocyte, compared to the marketed cream which showed severe destruction of the keratin layer. Therefore, patient compliance can be improved by encapsulating IVM within TESMs to minimize its skin reactions.

Nanoemulsions containing amphotericin b and paromomycin for the treatment of cutaneous leishmaniasis

Cutaneous leishmaniasis (CL) is a vector-borne disease characterized by skin lesions that can evolve into high-magnitude ulcerated lesions. Thus, this study aimed to develop an innovative nanoemulsion (NE) with clove oil, Poloxamer® 407, and multiple drugs, such as amphotericin B (AmB) and paromomycin (PM), for use in the topical treatment of CL.

METHODS

Droplet size, morphology, drug content, stability, in vitro release profile, in vitro cytotoxicity on RAW 264.7 macrophages, and antileishmanial activity using axenic amastigotes of Leishmania amazonensis were assessed for NEs.

RESULTS

After optimizing the formulation parameters, such as the concentration of clove oil and drugs, using an experimental design, it was possible to obtain a NE with an average droplet size of 40 nm and a polydispersion index of 0.3, and these parameters were maintained throughout the 365 days. Furthermore, the NE showed stability of AmB and PM content for 180 days under refrigeration (4 °C), presented a pH compatible with the skin, and released modified AmB and PM. NE showed the same toxicity as free AmB and higher toxicity than free PM against RAW 264.7 macrophages. The same activity as free AmB, and higher activity than free PM against amastigotes L. amazonensis.

CONCLUSION

It is possible to develop a NE for the treatment of CL; however, complementary studies regarding the antileishmanial activity of NE should be carried out.

Design and evaluation of in situ gel eye drops containing nanoparticles of Gemifloxacin Mesylate

Traditional eye drops used for topically administering drugs have poor ocular bioavailability due to the biological barriers of the eye. There is an interest to design and develop novel drug delivery systems that would extend the precorneal residence time, reduce the frequency of administration and decrease dose-related toxicity. This study aimed to prepare Nanoparticles of Gemifloxacin Mesylate and incorporate them into an in situ gel. The nanoparticles were prepared by ionic gelation technique, using 3² factorial design. Sodium tripolyphosphate (STPP) was used to crosslink Chitosan. The optimized formulation of the nanoparticles (GF4) contained 0.15% Gemifloxacin Mesylate, 0.15% Chitosan and 0.20% STPP, producing 71 nm particle size and 81.11% entrapment efficiency. The prepared nanoparticles showed biphasic release, with an initial burst release of 15% in 1.0 hr and a cumulative drug release of 90.53% at the end of 24 hrs. After that, the prepared nanoparticles were incorporated into an in situ gel, using Poloxamer 407, producing a sustained drug release with efficient antimicrobial activity against gram-positive and gram-negative bacteria as confirmed by the cup plate method.

Development of Oral In Situ Gelling Liquid Formulations of Garcinia Extract for Treating Obesity

Novel in situ gelling liquid formulations incorporating garcinia extract were developed to achieve prolonged delivery of hydroxycitric acid (HCA), an active compound displaying anti-obesity function, following oral administration. The optimized formulation was composed of sodium alginate (1.5% w/v), hydroxypropyl methylcellulose (HPMC K100) (0.25% w/v), calcium carbonate (1% w/v) and garcinia extract (2% w/v). The formulation displayed rapid gelation in less than a minute on exposure to 0.1 N hydrochloric acid (pH 1.2) and remained afloat for more than 24 h. The formulations were capable of gradually releasing more than 80% of HCA load over 8 h, depending on the composition. The resulting gels exhibited high values of gel strength by texture analysis, suggesting they would offer resistance to breakdown under the action of stomach content movement. The optimized formulation loaded garcinia extract significantly reduced lipid accumulation in 3T3-L1 adipocyte cells and displayed moderate anti-inflammatory activity by inhibiting the production of nitric oxide (NO) in LPS-stimulated RAW 264.7 macrophage cells. These findings demonstrate that oral in situ gelling liquid formulations based on sodium alginate and HPMC K100 offer much potential for sustained delivery of HCA and other anti-obesity compounds.

Newfangled Topical Film-Forming Solution for Facilitated Antifungal Therapy: Design, Development, Characterization, and In Vitro Evaluation

Luliconazole is a broad-spectrum topical antifungal agent that acts by altering the synthesis of fungi cell membranes. Literature suggests that the recurrence of fungal infection can be avoided by altering the pH of the site of infection. Studies have also suggested that fungi thrive by altering skin pH to be slightly acidic, i.e., pH 3-5. The current study is aimed to design, develop, characterize, and evaluate an alkaline pH-based antifungal spray solution for antifungal effects. Luliconazole was used as an antifungal agent and an alkaline spray was formulated for topical application by using Eudragit RS 100, propylene glycol (PG), water, sodium bicarbonate, and ethanol via solubilization method. Herein, sodium bicarbonate was used as an alkalizing agent. Based on DSC, FTIR, PXRD, scanning electron microscopy (SEM), and rheological analysis outcomes, the drug (luliconazole) and polymer were found to be compatible. F-14 formulation containing 22% Eudragit RS 100 (ERS), 1.5% PG, and 0.25% sodium bicarbonate was optimized by adopting the quality by design approach by using design of experiment software. The viscosity, pH, drying time, volume of solution post spraying, and spray angle were, 14.99 ± 0.21 cp, 8 pH, 60 s, 0.25 mL ± 0.05 mL, and 80 ± 2, respectively. In vitro drug diffusion studies and in vitro antifungal trials against Candida albicans revealed 98.0 ± 0.2% drug diffusion with a zone of inhibition of 9 ± 0.12 mm. The findings of the optimized luliconazole topical film-forming solution were satisfactory, it was compatible with human skin, and depicted sustained drug release that suggests promising applicability in facilitated topical antifungal treatments.

Investigation of Alogliptin-Loaded In Situ Gel Implants by 23 Factorial Design with Glycemic Assessment in Rats

The aim of the study was to design injectable long-acting poly (lactide-co-glycolide) (PLGA)-based in situ gel implants (ISGI) loaded with the anti-diabetic alogliptin. Providing sustained therapeutic exposures and improving the pharmacological responses of alogliptin were targeted for achieving reduced dosing frequency and enhanced treatment outputs. In the preliminary study, physicochemical characteristics of different solvents utilized in ISGI preparation were studied to select a proper solvent possessing satisfactory solubilization capacity, viscosity, water miscibility, and affinity to PLGA. Further, an optimization technique using a 2³ factorial design was followed. The blood glucose levels of diabetic rats after a single injection with the optimized formulation were compared with those who received daily oral alogliptin. N-methyl-2-pyrrolidone (NMP) and dimethyl sulfoxide (DMSO), as highly water-miscible and low viscous solvents, demonstrated their effectiveness in successful ISGI preparation and controlling the burst alogliptin release. The impact of increasing lactide concentration and PLGA amount on reducing the burst and cumulative alogliptin release was represented. The optimized formulation comprising 312.5 mg of PLGA (65:35) and DMSO manifested a remarkable decrease in the rats’ blood glucose levels throughout the study period in comparison to that of oral alogliptin solution. Meanwhile, long-acting alogliptin-loaded ISGI systems demonstrated their feasibility for treating type 2 diabetes with frequent dosage reduction and patient compliance enhancement.

Development and Characterization of Oral Raft Forming In Situ Gelling System of Neratinib Anticancer Drug Using 32 Factorial Design

Neratinib (NTB) is an irreversible inhibitor of pan-human epidermal growth factor receptor (HER-2) tyrosine kinase and is used in the treatment of breast cancer. It is a poorly aqueous soluble drug and exhibits extremely low oral bioavailability at higher pH, leading to a diminishing of the therapeutic effects in the GIT. The main objective of the research was to formulate an oral raft-forming in situ gelling system of NTB to improve gastric retention and drug release in a controlled manner and remain floating in the stomach for a prolonged time. In this study, NTB solubility was enhanced by polyethylene glycol (PEG)-based solid dispersions (SDs), and an in situ gelling system was developed and optimized by a two-factor at three-level (3²) factorial design. It was analyzed to study the impact of two independent variables viz sodium alginate [A] and HPMC K4M [B] on the responses, such as floating lag time, percentage (%) water uptake at 2 h, and % drug release at 6 h and 12 h. Among various SDs prepared using PEG 6000, formulation 1:3 showed the highest drug solubility. FT-IR spectra revealed no interactions between the drug and the polymer. The percentage of drug content in NTB SDs ranged from 96.22 ± 1.67% to 97.70 ± 1.89%. The developed in situ gel formulations exhibited a pH value of approximately 7. An in vitro gelation study of the in situ gel formulation showed immediate gelation and was retained for a longer period. From the obtained results of 3² factorial designs, it was observed that all the selected factors had a significant effect on the chosen response, supporting the precision of design employed for optimization. Thus, the developed oral raft-forming in situ gelling system of NTB can be a promising and alternate approach to enhance retention in the stomach and to attain sustained release of drug by floating, thereby augmenting the therapeutic efficacy of NTB.

Design and Evaluation of Losartan Potassium Effervescent Floating Matrix Tablets: In Vivo X-ray Imaging and Pharmacokinetic Studies in Albino Rabbits

Losartan potassium (LP) is an angiotensin receptor blocker used to treat hypertension. At higher pH, it shows poor aqueous solubility, which leads to poor bioavailability and lowers its therapeutic effectiveness. The main aim of this research was to develop a direct compressed effervescent floating matrix tablet (EFMT) of LP using hydroxyl propyl methylcellulose 90SH 15,000 (HPMC-90SH 15,000), karaya gum (KG), and an effervescent agent, such as sodium bicarbonate (SB). Therefore, an EFMT has been developed to prolong the stomach residence time (GRT) of a drug to several hours and improve its bioavailability in the stomach region. The blended powder was evaluated for pre-compression characteristics, followed by post-compression characteristics, in vitro floating, water uptake studies, and in vitro studies. The optimized formulation of EFMT was investigated for in vivo buoyancy by X-ray imaging and pharmacokinetic studies in Albino rabbits. The results revealed that the parameters of pre- and post-compression were within the USP limits. All tablets showed good floating capabilities (short floating lag time <1 min and floated for >24 h), good swelling characteristics, and controlled release for over 24 h. The Fourier-transform infrared (FTIR) and differential scanning calorimetry (DSC) spectra showed drug-polymer compatibility. The optimized formulation F3 (HPMC-90SH 15,000-KG) exhibited non-Fickian diffusion and showed 100% drug release at the end of 24 h. In addition, with the optimized formulation F3, we observed that the EFMT floated continuously in the rabbit's stomach area; thus, the GRT could be extended to more than 12 h. The pharmacokinetic profiling in Albino rabbits revealed that the relative bioavailability of the optimized LP-EFMT was enhanced compared to an oral solution of LP. We conclude that this a potential method for improving the oral bioavailability of LP to treat hypertension effectively.