Plate fixation in challenging traumatic carpal scaphoid lesions

Volar locking and angular stability plate for treatment of comminuted scaphoid fractures: a case series of 44 cases

BACKGROUND

The primary method employed worldwide for the treatment of scaphoid fractures is screw fixation. However, in unstable and comminuted fractures, percutaneous fixation could produce complications due to technical challenges, such as improper axis positioning, inaccurate screw length measurement, intra-articular screw penetration, and impingement. Alternative open approaches for the surgical management of scaphoid fractures have been proposed, and in recent years, a new specific volar locking plate for the treatment of scaphoid fractures has been developed. This study aims to present the outcomes of this technique applied to 44 patients with unstable and comminuted fractures of the scaphoid.

AIMS

The purpose of the study is to verify the effectiveness of the volar plate in the treatment of comminuted scaphoid fractures and the necessity for plate removal when consolidation has occurred.

METHODS

Between January 2021 and March 2023, a specific volar locking plate for the treatment of scaphoid fractures was used in 44 patients. A retrospective study was conducted involving all patients, consisting of continuous clinical and radiographic assessments, functional evaluations (using QuickDASH and MHQ), and patient satisfaction surveys.

RESULTS

All patients achieved clinical and radiographic recovery. However, the plate can impinge with nearby structures and should be removed once the fracture is consolidated. After plate removal, further improvement in range of motion was observed.

CONCLUSION

The plate and screws system is a viable and appropriate method of osteosynthesis in the treatment of unstable and comminuted recent fractures occurring in the middle third of the carpal scaphoid.

Comparison of corticocancellous bone graft from the anterolateral metaphysis of the distal radius versus iliac crest for the treatment of unstable scaphoid nonunion with humpback deformity

BACKGROUND

Corticocancellous bone grafting from the iliac crest is acceptable treatment for unstable scaphoid nonunion with a viable proximal pole. However, harvesting graft from the iliac crest is associated with donor site morbidity and the requirement of general anesthesia. Thus, bone grafting from the anterolateral metaphysis of the distal radius (DR) can be a treatment option. However, no study has compared the clinical effect between the two grafting techniques.

METHODS

From 2014 to 2019, patients with unstable scaphoid nonunion with humpback deformity underwent corticocancellous bone grafting from the anterolateral metaphysis of the DR (group DR) or iliac crest (group IC). Humpback deformity was determined by evaluating the scapholunate angle (SLA) ≥ 60°, intrascaphoid angle (ISA) ≥ 45°, and radiolunate angle (RLA) ≥ 15° from preoperative radiographs and computed tomography scans. The SLA, ISA, and RLA served to gauge carpal alignment. The operative time, grip strength, active range of motion (ROM), the Modified Mayo Wrist score (MMWS), and Disabilities of Arm, Shoulder, and Hand (DASH) score were assessed postoperatively.

RESULTS

Thirty-eight patients qualified for the study (group DR, 15; group IC, 23). Union rates did not differ by patient subset (group DR, 100%; group IC, 95.7%; P = .827), and grip strength, ROM, MWS, and DASH score were similar between groups at the last follow-up. The operative time (minutes) was significantly shorter in group DR (median, 98; quartiles, 80, 114) than in group IC (median, 125; quartiles, 105, 150, P < .001). The ISA, RLA, and SLA improved postoperatively in both groups (P < 0.001). The degree of restoring carpal alignment, as evaluated by SLA, showed superior correction capability in group DR (median, 25.3% quartiles, 21.1, 35.3, P < 0.05). Donor site complications were not significantly different between the groups.

CONCLUSIONS

Corticocancellous bone graft from the anterolateral metaphysis of the DR for unstable scaphoid nonunion is associated with a shorter operation time and comparable results with that from the iliac crest in regard to union, restoration of carpal alignment, and wrist function.

LEVEL OF EVIDENCE

Level III.

Rethinking Scaphoid Fixation

Scaphoid fixation, whether for acute injuries or nonunion, is made challenging by the small and intra-articular nature of the most commonly fractured carpal bone. The purpose of this article is to review the techniques to simplify scaphoid fixation and to optimize healing and early return to activity.

Scaphoid Plate Osteosynthesis in Complex Fractures and Wrist Trauma: A Case Series

Introduction Treatment of scaphoid fracture is challenging due to its unique blood supply and geometry. Traditionally, a headless compression screw is the standard treatment for unstable scaphoid fracture. Some fractures are complex, for example, comminution with bone loss. A scaphoid plate is an option in these difficult fractures providing adequate rotational stability. Aim To share our experience in using scaphoid plates in complex wrist trauma and comminuted fractures. Method and material Complex wrist trauma involving scaphoid fractures that were comminuted and multi-fragmentary fractures treated with plate osteosynthesis were retrospectively reviewed between July 2019 and September 2021. Patient demographic data, preoperative radiographs, CT scans, pain, wrist range of motion, and fracture union rate to union were reviewed. Quick Disabilities of the Arm, Shoulder, and Hand (QuickDASH®) score was recorded at 1-year postoperative follow-up.  Results Nine patients associated with complex wrist trauma were included in this case series. The mean follow-up was 2.5 years (13-30 months). The union rate was 100%. The mean arc of motion was 105° (95-110°). QuickDASH® score was 19.96 at 1-year postoperative follow-up. Four patients had good outcomes, four satisfactory, and one poor outcome. One hardware complication was observed which was the impingement of the plate proximally over the articular surface of the distal radius. Conclusion A scaphoid plate is a reliable option for treating complex and difficult fractures. It provides adequate stability, especially in comminution, bone loss, or multi-fragmentary fractures which are not amendable using other fixation methods. We recommend the expansion of plate osteosynthesis beyond scaphoid nonunion into complex wrist trauma.

Update to Management of Acute Scaphoid Fractures

The scaphoid is the most commonly fractured carpal bone. With high clinical suspicion and negative radiographs, expedient evaluation by CT or MRI has been recommended. When treating nondisplaced or minimally displaced scaphoid waist and distal pole fractures, immobilization below the elbow without inclusion of the thumb is an option. Comparatively, early surgical intervention for nondisplaced or minimally displaced scaphoid waist fractures allows for quicker return of function, but with increased risk of surgical complications and no long-term outcomes differences compared with cast immobilization. For most patients with such fractures, consideration for aggressive conservative treatment involving 6 weeks of immobilization with CT assessment to guide the need for continued casting, surgical intervention, or mobilization is advocated. Determination of union is best done with a CT scan at 6 weeks and at least 50% continuous trabecular bridging across the fracture site deemed sufficient to begin mobilization. Nonsurgical and surgical management of scaphoid fractures requires a thorough understanding of fracture location, fracture characteristics, and patient-specific factors to provide the best healing opportunity of this notoriously difficult fracture and return the patient to full function.

Retrospective study of radial dome osteotomy with volar plate fixation versus K-wires in Madelung's deformity: long-term follow-up

PURPOSE

The emerging role of the locking plate improved the technique also in corrective osteotomies in Madelung's deformity, but there is a lack of analyses between the fixation techniques, as well as little information in functional outcomes and long-term follow-up. The current study compared the outcomes, pitfalls, and advantages of volar plate and screws fixation versus K-wires fixation in a long-term follow-up.

METHODS

Twenty-eight children presenting the "distal radius" variant of Madelung's deformity underwent Vickers ligament release and distal radial dome osteotomy between 2009 and 2015. Twenty-three children (20 females and 3 males, mean age 15 years and 7 months at surgery and 24 years and 8 moths at follow-up), with 26 operatively treated wrists, were available for follow-up. A retrospective two-cohort study, evaluating clinically and radiologically results, has been conducted with a mean eight years and seven months follow-up.

RESULTS

Bone union and pain relief were obtained in all cases, as well as improvements in wrist motion and radiographic indices. A statistically significant correlation was identified between the volar plate fixation and an improved lunate subsidence on X-ray, and a trend towards an improved DASH score in the cohort with plate and screws, as well as significant improvement in wrist extension and supination always in the plate fixation cohort.

CONCLUSIONS

The long-term follow-up enabled the patients to report on more definitive outcomes in terms of functional and cosmetic improvements. Volar plate fixation is an effective technique allowing for simple post-operative management and earlier rehabilitation program with improved clinical and radiographic outcomes.

Piezoelectric Bone Surgery. Overview in Applications and Proof of Feasibility in Hand and Plastic Surgery

PURPOSE

Piezoelectric bone surgery was already extensively used in a number of surgical procedures ranging from dental to maxillofacial surgery. The authors aimed to determine whether piezosurgery was suitable and advantageous for performing osteotomies in Hand and Plastic reconstructive surgery.

METHODS

The authors overviewed a variety of applications for Piezosurgery^® Device, from Mectron, in bone reconstructive surgery with over the last 8 years. An overall number of 156 bone cutting procedures in adults and children was described at the phalanges, metacarpal bones and distal radius level, as well as in bone graft harvesting and bone remodeling following carpal scaphoid nonunion, scapho-lunate bone-ligament-bone reconstruction and fibula free flap in maxillofacial defects.

RESULTS

The consolidation rate was 87.5% in scaphoid nonunion grafting and fixation. Bone healing was achieved in all other cases. No intra-operative complications were recorded.

CONCLUSION

Piezosurgery^® allowed high precision in bone cutting as well as custom-made graft and surface roughness were obtained, while preserving nerves, vessels and tendons integrity. The instrument may be handling moved into the surgical space in absence of vibrations, with a clear view onto the bone. The mechanical and biological characteristics of the piezoelectrical effect perfected this technique as an effective and useful instrument in Hand and Plastic surgery. The selective bone cutting properties avoided injuries to the surrounding soft tissues and thermal damage of the bony cells. Best advantages were described in feasibility and flexibility for intra-articular osteotomies, custom-made grafts and reconstructive microsurgical techniques.