A Highly Active and Robust CoP/CoS2-Based Electrocatalyst Toward Overall Water Splitting

Effect of multi-interface electron transfer on water splitting and an innovative electrolytic cell for synergistic hydrogen production and degradation

The cleaning and utilization of industry wastewater are still a big challenge. In this work, we mainly investigate the effect of electron transfer among multi-interfaces on water electrolysis reaction. Typically, the CoS2, Co3S4/CoS2 (designated as CS4-2) and Co3S4/Co9S8/CoS2 (designated as CS4-8-2) samples are prepared on a large scale by one-step molten salt method. It is found that because of the different work functions (designated as WF; WF(Co3S4) = 4.48eV, WF(CoS2) = 4.41eV, WF(Co9S8) = 4.18 eV), the effective heterojunctions at the multi-interfaces of CS4-8-2 sample, which obviously improve interface charge transfer. Thus, the CS4-8-2 sample shows an excellent oxygen evolution reaction (OER) activity (134 mV/10 mA cm-2, 40 mV dec-1). The larger double-layer capacitance (Cdl = 17.1 mF cm-2) of the CS4-8-2 sample indicates more electrochemical active sites, compared to the CoS2 and CS4-2 samples. Density functional theory (DFT) calculation proves that due to interface polarization under electric field, the multi-interfaces effectively promote electron transfer and regulate electron structure, thus promoting the adsorption of OH- and dissociation of H2O. Moreover, an innovative norfloxacin (NFX) electrolytic cell (EC) is developed through introducing NFX into the electrolyte, in which efficient NFX degradation and hydrogen production are synergistically achieved. To reach 50 mA cm-2, the required cell voltage of NFX-EC has decreased by 35.2%, compared to conventional KOH-EC. After 2h running at 1 V, 25.5% NFX was degraded in the NFX EC. This innovative NFX-EC is highly energy-efficient, which is promising for the synergistic cleaning and utilization of industry wastewater.

Direct growth of nano-worm-like Cu2S on copper mesh as a hierarchical 3D catalyst for Fenton-like degradation of an imidazolium room-temperature ionic liquid in water

The increasing consumption of room-temperature ionic liquids (RTILs) inevitably releases RTILs into the water environment, posing serious threats to aquatic ecology due to the toxicities of RTILs. Thus, urgent needs are necessitated for developing useful processes for removing RTILs from water, and 1-butyl-3-methylimidazolium chloride (C4mimCl), the most common RTIL, would be the most representative RTIL for studying the removal of RTILs from water. As advanced oxidation processes with hydrogen peroxide (HP) are validated as useful approaches for eliminating emerging contaminants, developing advantageous heterogeneous catalysts for activating HP is the key to the successful degradation of C4mim. Herein, a hierarchical structure is fabricated by growing Cu2S on copper mesh (CSCM) utilizing CM as a Cu source. Compared to its precursor, CuO@CM, this CSCM exhibited tremendously higher catalytic activity for catalyzing HP to degrade C4mim efficiently because CSCM exhibits much more superior electrochemical properties and reactive sites, allowing CSCM to degrade C4mim rapidly. CSCM also exhibits a smaller Ea of C4mim elimination than all values in the literature. CSCM also shows a high capacity and stability for activating HP to degrade C4mim in the presence of NaCl and seawater. Besides, the mechanistic investigation of C4mim elimination by CSCM-activated HP has also been clarified and ascribed to OH and 1O2. The elimination route could also be examined and disclosed in detail through the quantum computational chemistry, confirming that CSCM is a useful catalyst for catalyzing HP to degrade RTILs.

Nanoneedle-Assembled Copper/Cobalt sulfides on nickel foam as an enhanced 3D hierarchical catalyst to activate monopersulfate for Rhodamine b degradation

While metal oxides are conventionally proposed for activating monopersulfate (MPS) to degrade refractory contaminants, metal sulfides have recently gained increased attention for MPS activation because these sulfides exhibit more reactive redox characteristics to enhance the catalytic activation of MPS. The present study attempts to develop a novel material comprised of metal sulfides with 3D hierarchical nanostructures to activate MPS. Specifically, a 3D hierarchically structured catalyst was fabricated by growing CuCo-layered double hydroxide (LDH) on nickel foam (NF), followed by direct sulfurization, affording Cu/CoS@NF (CCSNF). CCSNF could exhibit a unique morphology of floral bunches comprised of nano-needles, residing on the NF surfaces. Compared with its precursor, CuCo-LDH@NF, oxide analogue, and CuCo₂O₄@NF, CCSNF possessed superior physical and chemical properties, including larger surface area and pore volume, higher current density, and lower charge transfer resistance. These features render CCSNF a much more effective catalyst than CuCo-LDH@NF and CuCo₂O₄@NF for activating MPS to degrade Rhodamine B (RB). In particular, RB degradation by CCSNF-activated MPS required an activation energy only 26.8 kJ/mol, which is much lower than the reported values. The activation mechanism and degradation pathway of RB degradation by CCSNF-activated MPS were investigated and validated through experimental evidences and density function theory calculations.

Hydrogen-etched CoS2 to produce a Co9S8@CoS2 heterostructure electrocatalyst for highly efficient oxygen evolution reaction

There is a pressing requirement for developing high-efficiency non-noble metal electrocatalysts in oxygen evolution reactions (OER), where transition metal sulfides are considered to be promising electrocatalysts for the OER in alkaline medium. Herein, we report the outstanding OER performance of Co9S8@CoS2 heterojunctions synthesized by hydrogen etched CoS2, where the optimized heterojunction shows a low η 50 of 396 mV and a small Tafel slope of 181.61 mV dec-1. The excellent electrocatalytic performance of this heterostructure is attributed to the interface electronic effect. Importantly, the post-stage characterization results indicate that the Co9S8@CoS2 heterostructure exhibits a dynamic reconfiguration during the OER with the formation of CoOOH in situ, and thus exhibits a superior electrocatalytic performance.

A strategy for preparing high-efficiency and economical catalytic electrodes toward overall water splitting

Electrolyzing water technology to prepare high-purity hydrogen is currently an important field in energy development. However, the preparation of efficient, stable, and inexpensive hydrogen production technology from electrolyzed water is a major problem in hydrogen energy production. The key technology for hydrogen production from water electrolysis is to prepare highly efficient catalytic, stable and durable electrodes, which are used to reduce the overpotential of the hydrogen evolution reaction and the oxygen evolution reaction of electrolyzed water. The main strategies for preparing catalytic electrodes include: (i) choosing cheap, large specific surface area and stable base materials, (ii) modulating the intrinsic activity of the catalytic material through elemental doping and lattice changes, and (iii) adjusting the morphology and structure to increase the catalytic activity. Based on these findings, herein, we review the recent work in the field of hydrogen production by water electrolysis, introduce the preparation of catalytic electrodes based on nickel foam, carbon cloth and new flexible materials, and summarize the catalytic performance of metal oxides, phosphides, sulfides and nitrides in the hydrogen evolution and oxygen evolution reactions. Secondly, parameters such as the overpotential, Tafel slope, active site, turnover frequency, and stability are used as indicators to measure the performance of catalytic electrode materials. Finally, taking the material cost of the catalytic electrode as a reference, the successful preparations are comprehensively compared. The overall aim is to shed some light on the exploration of high-efficiency and economical electrodes in energy chemistry and also demonstrate that there is still room for discovering new combinations of electrodes including base materials, composition lattice changes and morphologies.

Interface engineering of cobalt-sulfide-selenium core-shell nanostructures as bifunctional electrocatalysts toward overall water splitting

The number of active sites and stability of the structure of electrocatalysts are the key factors in the process of overall water splitting. In this paper, cobalt-sulfide-selenium (Se:CoS_2-x) core-shell nanostructures are prepared by a simple two-step method, including hydrothermal reaction and chemical vapor deposition. The resulting product exhibits excellent electrochemical performance, owing to the synergistic effects between CoS₂ and CoSe_1-x, as well as the plentiful active sites in the electrode structure. The Se:CoS_2-x material shows a more improved hydrogen evolution reaction activity compared to CoS₂ and Co(OH)Cl precursor catalysts, with a low overpotential of only 240 mV achieved at 10 mA cm^-2. Meanwhile, Se:CoS_2-x as a bifunctional water splitting catalyst also shows remarkably improved oxygen evolution reaction activity, with a low overpotential of only 1.32 V at 10 mA cm^-2. The above results show that selenide/sulfide materials provide a new research direction for discovering high-performance and cheap electrode materials.