Fabrication of MEA from Biomass-Based Carbon Nanofibers Composited with Nickel-Cobalt Oxides as a New Electrocatalyst for Oxygen Reduction Reaction in Passive Direct Methanol Fuel Cells

Engineering nanostructured Ag doped α-MnO2 electrocatalyst for highly efficient rechargeable zinc-air batteries

Engineering of highly active, and non-precious electrocatalysts are vital to enhance the air-electrodes of rechargeable zinc-air batteries (ZABs). We report a facile co-precipitation technique to develop Ag doped α-MnO₂ nanoparticles (NPs) and investigate their application as cathode materials for ZABs. The electrochemical and physical characteristics of α-MnO₂ and Ag doped α-MnO₂ NPs were compared and examined via CP, CV, TGA/DTA, FT-IR, EIS, and XRD analysis. CV result displayed higher potential and current for ORR in Ag doped α-MnO₂ NPs than α-MnO₂; but, ORR performance decreased when the Ag doping was raised from 7.5 to10 mmol. Moreover, α-MnO₂ and Ag doped α-MnO₂ NPs showed 2.1 and 3.8 electron transfer pathway, respectively, showing Ag doped α-MnO₂ performance to act as an active ORR electrocatalyst for ZABs. The EIS investigation exhibited that charge-transfer resistance for Ag doped α-MnO₂ was extremely lower associated to the MnO₂ demonstrating that the successful loading of Ag in α-MnO₂. A homemade ZAB based on Ag–MnO₂-7.5 showed a high open circuit potential, low ohmic resistances, and excellent discharge profile at a constant current density of 1 mA/g. Moreover, Ag–MnO₂-7.5 show a specific capacity of 795 mA h g⁻¹ with corresponding high energy density ∼875 Wh kg⁻¹ at 1 mA cm⁻² discharging conditions.

•

Ag doped α-MnO₂ electrode for rechargeable zinc–air battery was prepared via a facile co-precipitation technique.

•

Ag doped α-MnO₂ electrode shows lower charge transfer resistance associated to un-doped MnO₂ electrode.

•

Ag doped α-MnO₂ shows enhanced ORR kinetics in oxygen electrode potential.

•

The capacitance performance of Ag doped α-MnO₂ electrodes was highly improved.

•

Ag doped α-MnO₂ electrode showed energy density of 69.3 W h kg−1 and power density of 722.9 W kg−1.

Passive Small Direct Alcohol Fuel Cells for Low-Power Portable Applications: Assessment Based on Innovative Increments since 2018

Passive small direct alcohol fuel cells (PS-DAFCs) are compact, standalone devices capable of electrochemically converting the chemical energy in the fuel/alcohol into electricity, with low pollutant emissions and high energy density. Thus, PS-DAFCs are extremely attractive as sustainable/green off-grid low-power sources (milliwatts to watts), considered as alternatives to batteries for small/portable electric and electronic devices. PS-DAFCs benefit from long life operation and low cost, assuring an efficient and stable supply of inherent non-polluting electricity. This review aims to assess innovations on PS-DAFC technology, as well as discuss the challenges and R&D needs covered on practical examples reported in the scientific literature, since 2018. Hence, this compilation intends to be a guidance tool to researchers, in order to help PS-DAFCs overcome the barriers to a broad market introduction and consequently become prime renewable energy converters and autonomous micropower generators. Only by translating research discoveries into the scale-up and commercialization process of the technology can the best balance between the economic and technical issues such as efficiency, reliability, and durability be achieved. In turn, this will certainly play a crucial role in determining how PS-DAFCs can meet pressing sustainable energy needs.

Metal-Supported Biochar Catalysts for Sustainable Biorefinery, Electrocatalysis and Energy Storage Applications: A Review

Biochar (BCH) is a carbon-based bio-material produced from thermochemical conversion of biomass. Several activation or functionalization methods are usually used to improve physicochemical and functional properties of BCHs. In the context of green and sustainable future development, activated and functionalized biochars with abundant surface functional groups and large surface area can act as effective catalysts or catalyst supports for chemical transformation of a range of bioproducts in biorefineries. Above the well-known BCH applications, their use as adsorbents to remove pollutants are the mostly discussed, although their potential as catalysts or catalyst supports for advanced (electro)catalytic processes has not been comprehensively explored. In this review, the production/activation/functionalization of metal-supported biochar (M-BCH) are scrutinized, giving special emphasis to the metal-functionalized biochar-based (electro)catalysts as promising catalysts for bioenergy and bioproducts production. Their performance in the fields of biorefinery processes, and energy storage and conversion as electrode materials for oxygen and hydrogen evolutions, oxygen reduction, and supercapacitors, are also reviewed and discussed.

Electrospun Carbon Nanofibers from Biomass and Biomass Blends-Current Trends

In recent years, ecological issues have led to the search for new green materials from biomass as precursors for producing carbon materials (CNFs). Such green materials are more attractive than traditional petroleum-based materials, which are environmentally harmful and non-biodegradable. Biomass could be ideal precursors for nanofibers since they stem from renewable sources and are low-cost. Recently, many authors have focused intensively on nanofibers' production from biomass using microwave-assisted pyrolysis, hydrothermal treatment, ultrasonication method, but only a few on electrospinning methods. Moreover, still few studies deal with the production of electrospun carbon nanofibers from biomass. This review focuses on the new developments and trends of electrospun carbon nanofibers from biomass and aims to fill this research gap. The review is focusing on recollecting the most recent investigations about the preparation of carbon nanofiber from biomass and biopolymers as precursors using electrospinning as the manufacturing method, and the most important applications, such as energy storage that include fuel cells, electrochemical batteries and supercapacitors, as well as wastewater treatment, CO2 capture, and medicine.