Impact of stent platform on longitudinal stent deformation: an in vivo frequency domain optical coherence tomography study

Evaluation of post-dilatation on longitudinal stent deformation and postprocedural stent malapposition in the left main artery by optical coherence tomography (OCT): an in vitro study

BACKGROUND

The diameter of the ostial and proximal left main coronary artery can be greater than 5.0 mm. However, the diameters of the mostly available coronary drug-eluting stents (DESs) are ≤ 4.0 mm. Whether high-pressure dilatation can increase the diameter of stents from 4.0 to 5.0 mm and whether post-dilatation leads to longitudinal stent deformation (LSD) of 4.0-mm-diameter stents have rarely been studied. Therefore, this study aims to evaluate LSD and stent malapposition of six types of commercially available 4.0-mm-diameter stents in China in a 5.0-mm-diameter artificial blood vessel model by optical coherence tomography (OCT) in vitro.

METHODS

The left main coronary artery was simulated by a truncated cone-shaped silicone tube. The internal diameters were 4.0 mm at one end of the silicone tube and 5.0 mm at the other end. Six different types of coronary stents widely used in China were selected for this study. Each stent was respectively implanted into the simulated blood vessel and dilated to a diameter of 4.2 mm according to the stent-balloon pressure compliance table. The stents were subjected to post-dilatation with a 5.0 × 15-mm noncompliant balloon. The LSD ratio of the longitudinal axis of each stent and stent malapposition were measured through OCT, and any fractures of the stents were determined.

RESULTS

None of the six types of stents fractured following post-dilatation. The longitudinal axes of the BuMA and Excrossal stents were slightly shortened, while the other stents were elongated after high-pressure post-dilatation. All stents expanded to a diameter of 5.0 mm without incomplete stent apposition, except for the Nano Plus stent, which remained malapposed after high-pressure post-dilatation.

CONCLUSION

All 4.0-mm-diameter stents can be expanded to a diameter of 5.0 mm by noncompliant balloon post-dilatation without stent strut fracture. Most stents were found to be well apposed after high-pressure post-dilatation. However, LSD was observed after post-balloon dilatation. Stent malapposition might be positively correlated with the percentage change in stent length.

Surface Engineering of Bioactive Coatings for Improved Stent Hemocompatibility: A Comprehensive Review

Cardiovascular diseases continue to be a major contributor to illness and death on a global scale, and the implementation of stents has given rise to a revolutionary transformation in the field of interventional cardiology. The thrombotic and restenosis complications associated with stent implantation pose ongoing challenges. In recent years, bioactive coatings have emerged as a promising strategy to enhance stent hemocompatibility and reduce thrombogenicity. This review article provides an overview of the surface engineering techniques employed to improve the hemocompatibility of stents and reduce thrombus formation. It explores the mechanisms underlying thrombosis and discusses the factors influencing platelet activation and fibrin formation on stent surfaces. Various bioactive coatings, including anticoagulant agents, antiplatelet agents, and surface modifications, are discussed in detail, highlighting their potential in reducing thrombogenicity. This article also highlights a multitude of surface modification techniques which can be harnessed to enhance stent hemocompatibility including plasma treatment, physical vapor deposition (PVD), chemical vapor deposition (CVD), and electrodeposition. These techniques offer precise control over surface properties such as roughness, charge, and composition. The ultimate goal is to reduce platelet adhesion, tailor wettability, or facilitate the controlled release of bioactive agents. Evaluation methods for assessing hemocompatibility and thrombogenicity are also reviewed, ranging from in vitro assays to animal models. Recent advances in the field, such as nanotechnology-based coatings and bioactive coatings with controlled drug release systems, are highlighted. Surface engineering of bioactive coatings holds great promise for enhancing the long-term outcomes of stent implantation by enhancing hemocompatibility and reducing thrombogenicity. Future research directions and potential clinical applications are discussed, underscoring the need for continued advancements in this field.

Investigation of the small-balloon technique as a method for retrieving dislodged stents

The small-balloon technique used to retrieve a dislodged coronary stent is less studied. We investigated the small-balloon technique to study the capture force and retrieval rate of dislodged proximal or distal stents. We developed a retrieval model for stent dislodgement and performed bench tests to compare proximal and distal capture. We evaluated capture force by capture site in a fixed stent dislodgement model and capture force and retrieval rate by capture site using a retrieval model of stent dislodgement. Three-dimensional (3D)-micro-computed tomography (CT) was used to scan the captured conditions of the distal (DC) and proximal (PC) groups. Stent, balloon shaft, and guiding catheter (GC) diameters were measured. Retrieval areas within GC were calculated and compared. The force was significantly lower in the PC group than in the DC group (p < 0.01). Successful retrieval was achieved in 100% and 84.8% in the PC and DC groups, respectively. The force required to retrieve the dislodged stent was significantly lower in the PC group than that in the DC group (p < 0.01). The force was significantly lower in the successful cases in the DC group than in the unsuccessful cases (p < 0.01). The retrievable areas in the PC and DC groups were 67.5% and 32.7%, respectively, as calculated from the values measured from the 3D-CT images. The success rate of PC was higher than that of DC using the small-balloon technique. The smaller proximal stent gap in the PC method facilitated the retrieval of the dislodgement stent.

Incidence and characteristics of incomplete stent apposition in calcified lesions: An optical coherence tomography study

BACKGROUND

Persistent or late acquired incomplete stent apposition (ISA) may be associated with late or very late stent thrombosis following drug-eluting stent implantation. Presence of calcium at the target lesion may increase the risk of ISA even after rotational atherectomy (RA) followed by stenting with high pressure balloon inflation. The aim of this study is to examine the incidence and characteristics of ISA in heavily calcified lesions.

METHODS

A total of 52 heavily calcified coronary artery lesions requiring RA plus stenting were selected and studied. After successful ablation followed by stent implantation, optical coherence tomography (OCT) was performed to assess stent expansion and apposition. Presence or absence of ISA was examined and maximal stent strut to vessel wall distance (max SV distance) was measured. In lesions with repeated OCT at follow-up, serial changes in ISA were investigated.

RESULTS

ISA was documented in 51 of 52 (98%) lesions. Mean max SV distance was 713 ± 371 μm. In lesions with serial OCT images (n = 11), max SV distance decreased significantly (692.1 ± 420.2 to 462.5 ± 387.0 μm, P < 0.01) but persisted in all but 2 lesions (82%).

CONCLUSIONS

ISA is frequently documented in heavily calcified lesions requiring RA. Significant ISA still persisted with minimal improvement in SV distance at follow-up. Prognostic impact of the persistent ISA in such calcified lesions needs further investigations.

Longitudinal stent elongation or shortening after deployment in the coronary arteries: which is dominant?

Background

Stent manufacturers always record stent shortening data while they do not record stent elongation data. The aim of this study is to identify both stent shortening and elongation occurring after deployment in the coronary arteries and know their percentage.

Results

The length of coronary stents was measured by intravascular ultrasound (IVUS) by (1) edge-to-edge (E-E) length, measured from the appearance of the first distal strut to the last proximal strut, and (2) area-to-area (A-A) length, measured from the first distal struts seen at more than one IVUS quadrant to the last proximal struts seen at more than one IVUS quadrant. Stent shortening was defined as both E-E and A-A lengths were shorter than the manufacturer box-stated length (shortened group). Stent elongation was defined as both E-E and A-A lengths were longer than the manufacturer box-stated length (elongated group), otherwise unchanged group. Consecutive 102 stents deployed in ischemic patients were included. Stent elongation was detected in 67.6% (69 stents), and shortening was detected in 15.7% (16 stents), while unchanged stents were detected in 16.7% (17 stents). Although the 3 groups had similar box-stated length and predicted foreshortened length, they had significantly different measurements by IVUS, p<0.001 for each comparison. Differences from box-stated length were 1.9±1.4mm, −1.4±0.4mm, and 0.4±0.3mm, respectively, p<0.001. The elongated group had significantly longer differences from the corresponding box-stated and predicted foreshortened lengths, while the shortened group had significantly shorter differences from the corresponding box-stated length and similar foreshortened length. By multinomial regression analysis, the plaque-media area and stent deployment pressure were the independent predictors of the stent length groups, p=0.015 and p=0.026, respectively.

Conclusions

Change in stent length is not only shortening—as mentioned in the manufacturer documents—but also stent elongation. Stent elongation is dominant, and the most important predictors of longitudinal stent changes are plaque-media area and stent deployment pressure.

Evaluation of Mechanical Performances of Stents with 38 mm Length in Long Lesion

Objective

Single stent with 38 mm length has emerged as a potential solution for long lesion treatment using PCI. However, long stents need to come over a longer lesion length combined with a higher incidence of tortuous calcification, requiring a stent to provide superior transport and compliance and reduce elastic retraction. Here, we evaluated the mechanical performances of the existing four types of drug eluting stents with 38 mm length, which could provide guidance for clinicians to choose the proper stents for the patients.

Methods

The stents with 38 mm length from XIENCE Xpedition (Abbott, US), SYNERGY (Boston Scientific, US), FIREHAWK (Microport, China), and HELIOS (HELIOS, China) were collected. Mechanical parameters of stents including crossing ability, compliance, elastic recoil, and longitudinal strength were performed.

Results

The resistance force of stents from XIENCE Xpedition was smaller than FIREHAWK (p < 0.05), which indicates that the stent from XIENCE Xpedition has better crossing ability. The ratio of stent diameter reduction from both XIENCE Xpedition and SYNERGY was less than 3% with no statistical difference. In addition, the elastic recoil percentage of stents from SYNERGY, XIENCE Xpedition, FIREHAWK, and HELIOS was 1.16%, 2.62%, 3.66%, and 4.19%, respectively, indicating that SYNERGY had better elastic recoil compared to FIREHAWK and HELIOS (p < 0.05), which indicates that the stent from XIENCE Xpedition has better crossing ability. The ratio of stent diameter reduction from both XIENCE Xpedition and SYNERGY was less than 3% with no statistical difference. In addition, the elastic recoil percentage of stents from SYNERGY, XIENCE Xpedition, FIREHAWK, and HELIOS was 1.16%, 2.62%, 3.66%, and 4.19%, respectively, indicating that SYNERGY had better elastic recoil compared to FIREHAWK and HELIOS (p < 0.05), which indicates that the stent from XIENCE Xpedition has better crossing ability. The ratio of stent diameter reduction from both XIENCE Xpedition and SYNERGY was less than 3% with no statistical difference. In addition, the elastic recoil percentage of stents from SYNERGY, XIENCE Xpedition, FIREHAWK, and HELIOS was 1.16%, 2.62%, 3.66%, and 4.19%, respectively, indicating that SYNERGY had better elastic recoil compared to FIREHAWK and HELIOS (

Conclusion

The evaluation of mechanical properties for the stent with 38 mm length including crossing ability, compliance, elastic recoil, and longitudinal strength could provide reference index for more accurately clinical application for long lesion treatment.

Mechanical test study in composites using digital holographic interferometry and optical coherence tomography simultaneously

A dual optical configuration to inspect the internal and external mechanical response of a composite specimen is presented. The inspection simultaneously uses two equally aligned optical techniques, digital holographic interferometry and Fourier domain optical coherence tomography, to retrieve surface and internal data, respectively. The sample under study is a composite specimen of poly-methyl-methacrylate reinforced with metallic particles. Two different sets of samples are analyzed to compare their mechanical behavior. A homemade, fully controlled testing machine is used to apply a controlled compression load while each technique registers an image. In this form, the surface and internal optical phase measurements are correlated to the same compression value for comparison purposes. Results for each technique are directly presented as simultaneous displacement maps, and a discussion and conclusion of this proposed dual method of inspection are presented.

Comparison of diagnostic performance in assessing the rewiring position into a jailed side branch between online 3D reconstruction systems version 1.1 and 1.2 derived from optical frequency domain imaging

The three-dimensional reconstruction of optical coherence tomography and optical frequency domain imaging (3D-OCT/OFDI) helps optimize bifurcation percutaneous coronary interventions (PCIs) with side branch (SB) dilatation by identifying the optimal rewiring position. 3D-OCT/OFDI’s diagnostic performance for assessing the rewiring position into a jailed SB is unknown. We retrospectively evaluated the diagnostic performances of a conventional (ver. 1.1) and a new (ver. 1.2) online 3D-OFDI reconstruction system based on an offline 3D reconstruction system’s performance. We analyzed 45 patients’ 52 OFDI pullbacks with main vessel stenting followed by rewiring into a jailed SB for coronary bifurcation lesions. We counted the undetected stent struts in the polygon of confluence as the stent detection performance. We assessed the diagnostic agreement regarding the rewiring position into a jailed SB by the three 3D reconstruction systems. The percentage of undetected struts and the diagnostic agreement of ver.1.2 were significantly better than those of ver.1.1 [5.1 ± 5.1% vs. 30.2 ± 14.2%; p < 0.0001, and 94.2% (49/52) vs. 76.9% (40/52); p = 0.0120]. The new online 3D-OFDI reconstruction system provides better diagnostic performance than the conventional online system for assessing the rewiring position into a jailed SB.