Development of composite mechanical peeler cum juice extractor for kinnow and sweet orange

Destalking of dry red chillies (Capsicum annum L.) and its characterization

Abstract

The prevalent manual destalking of dried red chillies is a labour-intensive, tedious, and unhealthy practice that can cause severe health ailments to the labourers. This study focuses on the design and fabrication of a mechanized system for removing stalks from dried chillies to reduce the drudgery involved in manual operation. The machine's primary components including hopper, rotating cylinder, triangular bridges, cutting blades, destalked chilli outlet, and stalk outlet were fabricated based on the design considerations and ease of operation. The machine was evaluated considering the independent parameters viz. feed rate, cylinder speed, and cylinder inclination for optimization of its performance using one-factor-at-a-time statistical design. Physical properties of chillies, destalking efficiency of the machine, and the effect of destalking on powder characteristics were determined. Optimal performance of the machine was achieved with the chillies having 8-10% (moisture), 6.5 kg/h (feed rate), 20 rpm (cylinder's speed), and 3° (cylinder's inclination) with destalking efficiency of 85-87%. The evaluation of powder characteristics also revealed the prominence of destalking with enhanced colour attributes. The developed machine is compact, efficient, economical, requires less labour and thereby it may encourage its adoption at the farmer's level and strengthening of the value chain of dried chillies.

Graphical abstract

Design and development of low cost sesame dehuller and its process standardization

The study was intended to develop a low cost sesame dehuller and optimize the dehulling process. The machine for dehulling of sesame seed was designed, developed and evaluated with different independent parameters viz. soaking time, dehuller speed and dehulling time for optimization of its performance during study. The processes variables had significant effect on response parameters whereas combined effect found non-significance. The results showed that the dehulling efficiency increases with increase in dehuller speed, soaking time and dehulling time. The optimum dehulling efficiency of 79.29% was obtained at soaking time of 120 min, 150 rpm dehuller speed and dehulling time of 6 min in this developed sesame dehuller. Mean dehulling efficiency was found to be minimum (41.84%) at 100 rpm speed with 40 min soaking time and 4 min dehulling time. The cost economic analysis discloses that developed dehuller is economically feasible and it could be beneficial for sesame based food industries. This developed dehuller is portable; therefore it requires less labor and remains suitable on farm sesame dehulling. The findings of the research may also remain useful for development of sesame processing equipment.

Physical characterization of frozen fruits from eight cultivars of the North American pawpaw (Asimina triloba)

Pawpaw (Asimina triloba [L.] Dunal) is an underutilized fruit native to North America. The fruit has a short shelf life, and browns and softens rapidly after harvesting. These characteristics present a challenge to the advancement of pawpaw as an economically viable specialty crop. This study evaluated the physical characteristics of frozen fruits from eight cultivars of the pawpaw fruit to establish the processing potential of pawpaw fruits. The results show that freeze-thaw cycle may have influenced the peel thickness, peel color, and pulp color of the fruits. Fruits of the Susquehanna cultivar had the highest fruit weight and pulp weight, making them potentially the most suitable for pulp processing. The pawpaw fruits had almost neutral pH ranging between 6.07 ± 0.21 and 6.47 ± 0.11, which could contribute to the rapid browning on exposure to air since an acidic pH is important for slowing enzymatic browning. To aid pawpaw juice extraction, enzymatic treatments may be necessary to increase the juice yield from the pulp. Overleese fruits may be the best for pawpaw juice production. These findings can aid in the selection of processing equipment and guide processors in their efforts to utilize pawpaw fruits to avoid postharvest and post-processing losses.