Microalgae fortification of low-fat oil-in-water food emulsions: an evaluation of the physicochemical and rheological properties

Development of Vegetable Creams Enriched with Different Microalgae Species: A Study on the Physicochemical and Sensory Stability over Time

Vegetable creams are a popular food with sensory characteristics (intense color, smooth texture, rich flavor) suitable for the inclusion of microalgae ingredients. Limited examples of vegetable creams reformulation with microalgae are reported in the literature, and no research has focused on their stability. This study evaluates the quality parameters of heat-treated, high-protein vegetable creams formulated with Spirulina, Tetraselmis chui, and four different Chlorella vulgaris strains over an 8-month period. The investigation examines changes in physicochemical properties (color, moisture, consistency, pH, °Brix, syneresis), microbiological parameters, and sensory profile. Physicochemical results showed enhanced homogenization effects of microalgae, suggesting valuable technological applications. The sensory analysis highlights a general enhancement of umami and salty perception, with differences depending on the species considered. Yellow chlorellas were the least impactful in terms of flavor but require further investigation regarding their pronounced color influence. Tetraselmis chui altered the most the sensory profile with a strong fishy and shellfish flavor. Over time, color variation deserves attention since slight browning phenomena, with possible negative effects on consumer perception, were observed. Regarding sensory aspects, limited and no detrimental effects were detected over time in texture, taste, and smell. No adverse impact on shelf life was observed, suggesting applications in long-term storage foods.

Microemulsions based on Acer truncatum seed oil and its fatty acids: fabrication, rheological property, and stability

AIMS

To construct the microemulsion delivery system (ME) loading ATSO and NA and study their physicochemical characteristics to enhance their stability and water solubility.

METHODS

By plotting ternary phase diagrams, the composition and proportions of the MEs were determined. The physicochemical characteristics and stability of MEs were evaluated by mean diameter, polydispersity index (PDI), pH, electrical conductivity, transmission electron microscopy (TEM), rheological behaviour measurement, and phase inversion temperature (PIT).

RESULTS

The MEs was composed with EL-40 as a surfactant and specifically with the addition of ethanol as a cosurfactant in NA-loaded ME. The mean diameters of ATSO-loaded ME and NA-loaded ME were 39.65 ± 0.24 nm and 32.90 ± 2.65 nm, and PDI were 0.49 ± 0.01 and 0.28 ± 0.14, respectively. The TEM confirmed the spherical and smooth morphology of MEs. The rheological results indicated that MEs are dilatant fluids with the advantages of low viscosity, high fluidity, and tolerance to temperature fluctuations. The mean diameter and PDI of MEs showed no significant change after storage at 25 °C for 28 days and centrifugation.

CONCLUSION

The prepared microemulsions could expand the application prospects of ATSO and NA products in cosmetics, medicine, foods and other fields.

Effect of different size microplastic particles on the construction of algal-bacterial biofilms and microbial communities

Algal-bacterial symbiotic system is a biological purification system that combines sewage treatment with resource utilization and has the dual effects of carbon sequestration and pollution reduction. In this study, an immobilized algal-bacterial biofilm system was constructed for the treatment of natural sewage. Effects of exposure to microplastics (MPs) with different particle diameters (0.065 μm, 0.5 μm and 5 μm) were determined in terms of algal biomass recovery efficiency, the composition of extracellular polymeric substances (EPS) and morphologic characteristics. The impacts of MPs on the bacterial diversity and community structure of biofilms were also examined. The metagenomic analysis of key microorganisms and related metabolism pathways involved in system was further investigated. Results showed that following exposure to 5 μm MP, a maximum algal recovery efficiency of 80% was achieved, with a minimum PSII primary light energy conversion efficiency (Fv/Fm ratio) of 0.513. Furthermore, 5 μm MP caused the highest level of damage to the algal-bacterial biofilm, enhancing the secretion of protein-rich EPS. The biofilm morphology became rough and loose following exposure to 0.5 μm and 5 μm MP. Community diversity and richness were significantly high in biofilms exposed to 5 μm MP. Proteobacteria (15.3-24.1%), Firmicutes (5.0-7.8%) and Actinobacteria (4.2-4.9%) were dominant in all groups, with exposure to 5 μm MP resulting in the highest relative abundance for these species. The addition of MPs promoted the related metabolic functions while inhibited the degradation of harmful substances by algal-bacterial biofilms. The findings have environmental significance for the practical application of algal-bacterial biofilms for sewage treatment, providing novel insights into the potential effects of MPs on immobilized algal-bacterial biofilm systems.

The Experimental Development of Emulsions Enriched and Stabilized by Recovering Matter from Spirulina Biomass: Valorization of Residue into a Sustainable Protein Source

Spirulina consists of a cluster of green-colored cyanobacteria; it is commonly consumed as a food or food supplement rich in bioactive compounds with antioxidant activity, predominantly C-phycocyanin (C-PC), which is related to anti-inflammatory action and anticancer potential when consumed frequently. After C-PC extraction, the Spirulina residual biomass (RB) is rich in proteins and fatty acids with the potential for developing food products, which is interesting from the circular economy perspective. The present work aimed to develop a vegan oil-in-water emulsion containing different contents of Spirulina RB, obtaining a product aligned with current food trends. Emulsions with 3.0% (w/w) of proteins were prepared with different chickpea and Spirulina RB ratios. Emulsifying properties were evaluated regarding texture and rheological properties, color, antioxidant activity, and droplet size distribution. The results showed that it was possible to formulate stable protein-rich emulsions using recovering matter rich in protein from Spirulina as an innovative food ingredient. All the concentrations used of the RB promoted the formulation of emulsions presenting interesting rheological parameters compared with a more traditional protein source such as chickpea. The emulsions were also a source of antioxidant compounds and maintained the color for at least 30 days after production.

Development and Characterization of a Low-Fat Mayonnaise Salad Dressing Based on Arthrospira platensis Protein Concentrate and Sodium Alginate

The food industry is constantly reformulating different foods to fulfill the demands of the consumers (natural ingredients and good sensory quality). The present work aimed to produce low-fat mayonnaises using 30.0, 22.5, and 15.0% oil, 1% soy protein isolate (SPI) or spirulina (Arthrospira platensis) protein concentrate (SPC), and 2% sodium alginate. The physical properties (thermal stability, rheological behavior, and particle size), the sensory attributes (appearance, texture, taste, and acceptability), the purchase probability, and amino acid availability (after a simulated digestion) were evaluated. The mayonnaises demonstrated good thermal stability (>90%) using 22.5 and 15% oil, all products showed shear-thinning behavior and a consistency index of 20–66 Pa·s. The reduction of oil from 30 to 15% increased the particle size from 6–9 µm to 10–38 µm. The most acceptable product was the formulated with SPI and 22.5% oil (8.3 of acceptability and 79% of purchase probability). Finally, the addition of proteins improved the total essential amino acids compared to a commercial product (28 and 5 mg/25 g, respectively). In summary, it was possible to obtain well accepted products with high purchase probability using low concentrations of oil and vegetable proteins.

Effects of microplastics of different sizes on the Chlorella vulgaris - Ganoderma lucidum co-pellets formation processes

The effects of different sized MPs on the formation process of algal-fungal co-pellets were studied. The results show that a maximum biomass recovery of 70.96% and a minimum F_v/F_m ratio of 0.463 reached with 5.000 μm-microplastics. Chlorella vulgaris cells and microplastics adhered evenly to the mycelia of Ganoderma lucidum. The contact angle decreased 24.02% and 34.68% with addition of 0.065 μm and 0.500 μm microplastics, respectively, compared to the control group, while the lowest crystallinity index (7.05%) was obtained with 0.065 μm-microplastics addition. Moreover, 5.000 μm microplastics promoted the extracellular polymeric substances (EPS) secretion, with the soluble polysaccharide content increasing by 40.50% and the soluble protein content increasing by 23.25% compared with the single algal-fungal system, while bound polysaccharides increased by 113.26% and bound proteins increased by 29.48%. The 5.000 μm microplastics also significantly promoted enzyme activity in the co-pellets. These results provide a theoretical basis for algal recovery in microplastic-containing water.

Development of High-Protein Vegetable Creams by Using Single-Cell Ingredients from Some Microalgae Species

The aim of this paper was to develop high-protein vegetable creams through the incorporation of microalgae. Single-cell ingredients from Arthrospiraplatensis (spirulina), Chlorella vulgaris, Tetraselmis chui, and Nannochloropsis oceanica were incorporated at two levels of addition (1.5% and 3.0%) to a standard vegetable cream (STD). Effects of incorporation were assessed in terms of physicochemical and rheological attributes as well as nutritional labeling facts. Creams formulated with 3% A. platensis, N. oceanica, or T. chui showed strong color differences (6 < ΔE < 12) compared to STD; creams formulated with 1.5% A. platensis, T. chui, or N. oceanica showed perceptible differences (3 < ΔE < 6); and those made with C. vulgaris at 1.5 and 3% exhibited small differences (ΔE < 2). Moisture content, water activity, pH, syneresis, and °Brix did not show significant changes. Adding microalgae increased Bostwick consistency and decreased the consistency coefficient (K) except in creams made with A. platensis, which showed comparable values to STD. Principal component analysis indicated that creams made with 1.5% C. vulgaris were the most similar to STD considering all evaluated parameters. Estimation of the nutritional labeling facts showed that the four formulations could be labeled as having "high protein content" following the present EU legislation.

Sugar and no sugar added fruit microalgae-enriched jams: a study about their physicochemical, rheological, and textural properties

Jams are preparations of fruits whose main preserving agent is sugar. Due to this, health concerns of consumers have resulted in a sugar reduction, and its replacement using alternative sweeteners and introducing new ingredients enhancing nutritional properties. In this study, four types of fruits jams (plum, strawberry, apple, and peach), with or without sugar, were prepared using two microalgae biomass, Arthrospira platensis (Spirulina) and Chlorella vulgaris, and Dunaliella salina extract as ingredients at different mix levels of concentrations, 0.10%–0.10%–0.05% respectively, for plum; 0.04%–0.00%–0.01 respectively, for strawberry; 0.06%–0.04%–0.00% respectively, for apple and 0.00%–0.01%–0.04% respectively, for peach. Physicochemical, rheological, and textural parameters were evaluated. Substitution of sugar/fructose syrup in the jam’s preparation caused changes in pH values, solid soluble content, and rheological and textural properties compared to sugar jams. Using sugar or sweeteners as isomalt, stevia and sucralose and microalgae biomass or extract showed significant changes in colour coordinates, however, these differences were not perceptible by the human eye. Jams containing microalgae biomass-extract showed higher G', G'', G*, and η* values than their corresponding control samples. All the jams presented weak-gel characteristics, distinguishing fruit jams. However, the results of weak-gel model analysis suggest that the influence of the different ingredients in the food system depends not only on their concentration but also on the interactions in the gel structure. Strawberry and apple jams showed no significant differences between microalgae biomass-extract samples and control samples, for both sugar and no sugar added jams being the best-obtained samples.