Modification of graphene oxide with imidazolium-based ionic liquid for significant sorption of La(III) and Pr(III) from aqueous solutions

Evaluation of anion exchange resin for sorption of selenium (IV) from aqueous solutions

In this work, selenium (IV) ions were adsorbed from aqueous solutions by the strongly basic anion exchange resin Amberlite IRA-400. The morphology of the resin before and after Se(IV) sorption was investigated using different techniques such as energy dispersive X-ray spectroscopy (EDX), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). To determine the ideal sorption conditions, a batch approach was used to examine the variables affecting Se(IV) sorption performance, including pH, shaking time, adsorbent dosage, initial metal ion concentration, and temperature. The results showed the optimal parameters for the highest percentage of selenium (80.25%) at an initial concentration of 100.0 mg L-1, pH 3.0, the adsorbent dosage of 10.0 mg, and the shaking time of 60.0 min. According to the experimental findings, the sorption process was satisfactorily explained by the pseudo-second-order kinetic model. The maximum adsorption capacity at pH 3.0 was 18.52 mg g-1, and the adsorption rather well followed the Langmuir adsorption isotherm. Moreover, exothermic and spontaneous sorption reaction was the result of thermodynamic properties (negativity of both ΔG° and ΔH°). The adsorption phase's random distribution of the resin-solution interface is indicated by the positive value of ΔSo. Finally, the desorption study was performed using different concentrations of desorbing agents; HNO3, HCl, and sodium acetate. The results illustrated that the effective desorbing agent was 1.0 mol L-1 HNO3, with desorption efficiency reaching about 96.4%. Finally, the Amberlite IRA-400 demonstrated excellent adsorption-desorption behavior over five times, suggesting that the Amberlite IRA-400 could be an effective candidate for the sorption of Se(IV) from several metal ions that occur in fission products.

Adsorption behavior of Mo(VI) from aqueous solutions using tungstate-modified magnetic nanoparticle

A new magnetic nanoparticle modified with sodium tungstate (Mnp-Si-W) was synthesized and employed for the sorption of molybdenum from aqueous solutions. The prepared nanoparticles (Mnp-Si-W) were characterized by different advanced techniques. Different parameters that influenced the adsorption percent of Mo(VI) were investigated using a batch process. Based on a systematic investigation of the adsorption isotherms and kinetics models, Mo(VI) adsorption follows the Langmuir model and pseudo-second-order kinetics. According to the Langmuir isotherm model, the Mnp-Si-W nanoparticles exhibited a maximum adsorption capacity of 182.03 mg g-1 for Mo(VI) at pH 2.0. The effect of competing ions showed that the prepared nanoparticles have a high selectivity for the sorption of molybdenum. Moreover, the effect of some interfering anions on Mo(VI) ion sorption is found in the following order: phosphate < sulfate < chromate. Finally, the nanoparticle (Mnp-Si-W) can be successfully reused five times.

Synthesis of Prussian blue-embedded magnetic micro hydrogel for scavenging of cesium from aqueous solutions; Batch and dynamic investigations

A magnetic micro porous structure composite based on alginate and Prussian blue (M-SA-PB) was simply prepared for cesium removal from the aqueous solutions. The gelation and formation of PB proceeded through the same step, which made the PB homogenously distributed and firmly attached to the alginate matrix. The homogenizer was applied to break down the bulky gel structure into micro-ones, and the lyophilizer will provide the porous structure. Batch cesium sorption experiments showed that the adsorption kinetics and isotherms were attributed to the pseudo-second-order model and Langmuir isotherm. Moreover, the Cs-ion is favorably adsorbed on the M-SA-PB composite surface as a monolayer towards Cs, with a maximum adsorption capacity reach of 191.0 mg/g. Furthermore, the M-SA-PB adsorbent showed excellent adsorption selectivity of Cs from multiple-ion solutions. Our work was extended to use the M-SA-PB composite in dynamic cesium sorption. The column studies showed that the removal efficiency of Cs+ increased with increasing bed depth as well as the initial cesium concentration. Finally, as previously mentioned, the M-SA-PB could be considered an excellent Cs+ scavenger employing both batch and dynamic approaches, which makes it a promising adsorbent for practical investigations.

Adsorption of palladium from chloride aqueous solution using silica alginate nanomaterial

The adsorption characteristics of palladium from chloride aqueous solution onto the silica alginate (SA-Si) nanomaterial have been investigated. The prepared nanomaterial (SA-Si) was characterized by various advanced techniques that ensured a successful preparation process. Different adsorption parameters including the solution pH, shaking time, palladium ion concentration, adsorbent dosage, and temperature were investigated. The experimental results showed that the pseudo-first-order model provided the best fitting for the palladium ions adsorption, and the time required to reach equilibrium was 90.0 min. The adsorption isotherm result from palladium was well described by the Langmuir isotherm model and the maximum adsorption capacity of (SA-Si) nanomaterial was estimated as 12.50 mg/g for Pd(II). Moreover, the thermodynamic results demonstrated that Pd(II) sorption onto (SA-Si) nanomaterial was endothermic and spontaneous. Additionally, the SA-Si nanomaterial can be used as an effective adsorbent for the sorption of Pd(II) from various metal ions present in fission products.

Fabrication of magnesium oxide-calcium alginate hydrogel for scaffolding yttrium and neodymium from aqueous solutions

In this research, the possibility of using sustainable nano-MgO/Ca-alginate beads for efficient sorption of some rare earth metal ions such as neodymium(III) and yttrium(III) from an aqueous acidic solution was explored. The nano-MgO/Ca-alginate beads adsorbent was characterized before and after sorption of Nd(III) and Y(III) using scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FT-IR), energy dispersive X-ray analysis (EDX), and X-ray diffraction (XRD) techniques. Batch sorption parameters were investigated, such as contact time, initial metal ion concentration, and adsorbent dose (V/m). The calculated experimental results showed that the suitable selected sorption conditions were carried out using 100 mg/L of Nd(III) and Y(III) with nano MgO/Ca-alginate beads (contact time = 90 min, pH = 2, V/m = 0.05 L/g). The maximum sorption capacity of 0.1 g of nano MgO/Ca-alginate was found to be 7.85 mg/g and 5.60 mg/g for Nd(III) and Y(III), respectively. The desorption of Nd(III) and Y(III) from the loaded nano MgO/Ca-alginate was achieved with 1.0 M sulfamic acid and found to be 51.0% and 44.2%, respectively. The calculated thermodynamic parameters for the nano MgO/Ca-alginate/Nd/Y system show that the positive charge of ΔHo confirmed the endothermic nature of the sorption process, ΔSo (positive) indicates an increase in reaction system disordering, and ΔGo (negative) indicates a spontaneous process. These kinetic results indicate that the sorption process of Nd(III) and Y(III) on nano MgO/Ca-alginate beads is performed by the chemisorption process.