Three-dimensional nanofibrous microenvironment designed for the regulation of mesenchymal stem cells

Composite Graphene for the Dimension- and Pore-Size-Mediated Stem Cell Differentiation to Bone Regenerative Medicine

As one of the most promising means to repair diseased tissues, stem cell therapy with immense potential to differentiate into mature specialized cells has been rapidly developed. However, the clinical application of stem-cell-dominated regenerative medicine was heavily hindered by the loss of pluripotency during the long-term in vitro expansion. Here, a composite three-dimensional (3D) graphene-based biomaterial, denoted as GO-Por-CMP@CaP, with hierarchical pore structure (micro- to macropore), was developed to guide the directional differentiation of human umbilical cord MSCs (hucMSCs) into osteoblasts. GO-Por-CMP@CaP could act as a high-efficiency living composite material without a "dead space", effectively regulating the cellular response. The 3D topological structure generated via the two-step modification on two-dimensional graphene could effectively mimic the natural 3D microenvironment of cells, enhancing the stem cell attachment, which is not only conducive for the proliferation of stem cells but also beneficial for the osteogenic differentiation. Meanwhile, the wide existence of interconnected macropores was favorable for bone ingrowth, capillary formation, as well as the nutrients transportation. Furthermore, the concurrent existence of micro- and mesopores significantly promoted the extracellular matrix (ECM) adsorption, which ensured cellular attachment, leading to multiscale osteointegration. Both in vitro and in vivo assay demonstrated the above three factors collaborated mutually with nanosized calcium phosphate (CaP, with chemical similarities to the inorganic components of bone), which provided abundant adhesive sites to adequately induce osteogenic differentiation in the absence of any soluble growth factors. Proteomic analysis experiments confirmed that GO-Por-CMP@CaP promoted the differentiation of hucMSCs cells into osteoblasts by affecting the PI3K-Akt signaling pathway through the up-regulation of SPP1 protein. Our study offers a pure material-based stem cell differentiation regulating behavior via engineering the dimension and porosity of material, which provides insights into the design and development of substitutes to bone repair materials.

Intelligent Vascularized 3D/4D/5D/6D-Printed Tissue Scaffolds

Blood vessels are essential for nutrient and oxygen delivery and waste removal. Scaffold-repairing materials with functional vascular networks are widely used in bone tissue engineering. Additive manufacturing is a manufacturing technology that creates three-dimensional solids by stacking substances layer by layer, mainly including but not limited to 3D printing, but also 4D printing, 5D printing and 6D printing. It can be effectively combined with vascularization to meet the needs of vascularized tissue scaffolds by precisely tuning the mechanical structure and biological properties of smart vascular scaffolds. Herein, the development of neovascularization to vascularization to bone tissue engineering is systematically discussed in terms of the importance of vascularization to the tissue. Additionally, the research progress and future prospects of vascularized 3D printed scaffold materials are highlighted and presented in four categories: functional vascularized 3D printed scaffolds, cell-based vascularized 3D printed scaffolds, vascularized 3D printed scaffolds loaded with specific carriers and bionic vascularized 3D printed scaffolds. Finally, a brief review of vascularized additive manufacturing-tissue scaffolds in related tissues such as the vascular tissue engineering, cardiovascular system, skeletal muscle, soft tissue and a discussion of the challenges and development efforts leading to significant advances in intelligent vascularized tissue regeneration is presented.

An NIR photothermal-responsive hybrid hydrogel for enhanced wound healing

Moderately regulating vascularization and immune microenvironment of wound site is necessary to achieve scarless wound healing of the skin. Herein, we have prepared an angiogenesis-promoting and scar-preventing band-aid with a core-shell structure, that consists of MXene-loaded nanofibers (MNFs) as the core and dopamine-hyaluronic acid hydrogel (H) as the shell (MNFs@V-H@DA) to encapsulate a growth factor (vascular endothelial growth factor, VEGF, abbreviated as V) and H2S donor (diallyl trisulfide, DATS, abbreviated as DA). The continuous release of DA from this system produced H2S, which would successfully induce macrophages to polarize into M2-lile phenotype, regulating the immune microenvironment and inhibiting an excessive inflammatory response at the wound sites. It is conducive to the proliferation of skin cells, facilitating the wound healing. In addition, an appropriate amount of VEGF can be released from the MXene nanofibrous skeleton by adjusting the time of near-infrared (NIR) light exposure, preventing excessive neovascularization and extracellular matrix deposition at the wound sites. Collectively, this NIR photothermal-responsive band-aid achieved scarless wound healing through gradient-controlled vascularization and a related immune sequential reaction of damaged skin tissue.

Rapid Determination of Phase Diagrams for Biomolecular Liquid-Liquid Phase Separation with Microfluidics

Biomolecular phase separation is currently emerging in both the medical and life science fields. Meanwhile, the application of liquid-liquid phase separation has been extended to many fields including drug discovery, fibrous material fabrication, 3D printing, and polymer design. Although more than 8600 proteins and other synthetic macromolecules are capable of phase separation as recently reported, there is still a lack of a high-throughput approach to quantitatively characterize its phase behaviors. To meet this requirement, here, we proposed fast and high-resolution acquisition of biomolecular phase diagrams using microfluidic chips. Using this platform, we demonstrated the phase behavior of polyU/RRASLRRASLRRASL in a quantitative manner. Up to 1750 concentration conditions can be generated in 140 min. The detection limitation of our device to capture the saturation concentration for phase separation is about 5 times lower than that of the traditional turbidity method. Thus, our results provide a basis for the rapid acquisition of phase diagrams with high-throughput and pave the way for its wide application.

Synergistic Effect of the Photothermal Performance and Osteogenic Properties of MXene and Hydroxyapatite Nanoparticle Composite Nanofibers for Osteogenic Application

MXene has attracted tremendous attention due to its outstanding photothermal properties and biocompatibility. Hydroxyapatite (HA) contains Ca, Mg and P elements, which play important roles in promoting osteogenic differentiation of mesenchymal stem cells (MSCs). In this study, a class of composite nanofibers consisting of MXene nanosheets and HA nanoparticles (M-@HA NFs) are developed based on the synergistic effect of photothermal performance and osteogenic properties. The obtained composite nanofibers demonstrated excellent photothermal properties, and the temperature reached 44 °C under NIR exposure (808 nm). In addition, the composite nanofibers also displayed good biocompatibility and promote the growth and osteogenic differentiation of bone mesenchymal stem cells (BMSCs). More importantly, under NIR exposure, BMSCs on the composite nanofibers achieved much better osteogenic differentiation than those without NIR exposure due to the accelerated release of Ca, Mg and P elements. Therefore, we considered the unique photothermal and osteogenic differentiation to indicate that this new class of MXene composite nanofibers has tremendous application potential in bone tissue engineering.

Bone mesenchymal stem cells stimulation by magnetic nanoparticles and a static magnetic field: release of exosomal miR-1260a improves osteogenesis and angiogenesis

Background

The therapeutic potential of exosomes derived from stem cells has attracted increasing interest recently, because they can exert similar paracrine functions of stem cells and overcome the limitations of stem cells transplantation. Exosomes derived from bone mesenchymal stem cells (BMSC-Exos) have been confirmed to promote osteogenesis and angiogenesis. The magnetic nanoparticles (eg. Fe₃O₄, γ-Fe₂O₃) combined with a static magnetic field (SMF) has been commonly used to increase wound healing and bone regeneration. Hence, this study aims to evaluate whether exosomes derived from BMSCs preconditioned with a low dose of Fe₃O₄ nanoparticles with or without the SMF, exert superior pro-osteogenic and pro-angiogenic activities in bone regeneration and the underlying mechanisms involved.

Methods

Two novel types of exosomes derived from preconditioned BMSCs that fabricated by regulating the contents with the stimulation of magnetic nanoparticles and/or a SMF. Then, the new exosomes were isolated by ultracentrifugation and characterized. Afterwards, we conducted in vitro experiments in which we measured osteogenic differentiation, cell proliferation, cell migration, and tube formation, then established an in vivo critical-sized calvarial defect rat model. The miRNA expression profiles were compared among the exosomes to detect the potential mechanism of improving osteogenesis and angiogenesis. At last, the function of exosomal miRNA during bone regeneration was confirmed by utilizing a series of gain- and loss-of-function experiments in vitro.

Results

50 µg/mL Fe₃O₄ nanoparticles and a 100 mT SMF were chosen as the optimum magnetic conditions to fabricate two new exosomes, named BMSC-Fe₃O₄-Exos and BMSC-Fe₃O₄-SMF-Exos. They were both confirmed to enhance osteogenesis and angiogenesis in vitro and in vivo compared with BMSC-Exos, and BMSC-Fe₃O₄-SMF-Exos had the most marked effect. The promotion effect was found to be related to the highly riched miR-1260a in BMSC-Fe₃O₄-SMF-Exos. Furthermore, miR-1260a was verified to enhance osteogenesis and angiogenesis through inhibition of HDAC7 and COL4A2, respectively.

Conclusion

These results suggest that low doses of Fe₃O₄ nanoparticles combined with a SMF trigger exosomes to exert enhanced osteogenesis and angiogenesis and that targeting of HDAC7 and COL4A2 by exosomal miR-1260a plays a crucial role in this process. This work could provide a new protocol to promote bone regeneration for tissue engineering in the future.

Graphical abstract

Supplementary Information

The online version contains supplementary material available at 10.1186/s12951-021-00958-6.