Direct buffer composition of blood pre-process for nucleic acid based diagnostics

Emerging Microfluidic Devices for Sample Preparation of Undiluted Whole Blood to Enable the Detection of Biomarkers

Blood testing allows for diagnosis and monitoring of numerous conditions and illnesses; it forms an essential pillar of the health industry that continues to grow in market value. Due to the complex physical and biological nature of blood, samples must be carefully collected and prepared to obtain accurate and reliable analysis results with minimal background signal. Examples of common sample preparation steps include dilutions, plasma separation, cell lysis, and nucleic acid extraction and isolation, which are time-consuming and can introduce risks of sample cross-contamination or pathogen exposure to laboratory staff. Moreover, the reagents and equipment needed can be costly and difficult to obtain in point-of-care or resource-limited settings. Microfluidic devices can perform sample preparation steps in a simpler, faster, and more affordable manner. Devices can be carried to areas that are difficult to access or that do not have the resources necessary. Although many microfluidic devices have been developed in the last 5 years, few were designed for the use of undiluted whole blood as a starting point, which eliminates the need for blood dilution and minimizes blood sample preparation. This review will first provide a short summary on blood properties and blood samples typically used for analysis, before delving into innovative advances in microfluidic devices over the last 5 years that address the hurdles of blood sample preparation. The devices will be categorized by application and the type of blood sample used. The final section focuses on devices for the detection of intracellular nucleic acids, because these require more extensive sample preparation steps, and the challenges involved in adapting this technology and potential improvements are discussed.

Effect of storage temperature and duration on direct PCR amplification of various feather types and DBS matrices

The use of direct PCR has been pioneered over the last decade for DNA analysis of biological specimens of distinct origins. The information on how longer these specimens can be stored and amplified by direct PCR is however scanty. Such a piece of information could expedite research and diagnostic studies without compromising the reliability of results. The current study was therefore designed to analyze the effect of storage temperature and duration on direct PCR amplification of biological specimens having either low quantity or high quantity of DNA. Whole blood, dried blood spots (DBS), and feathers from chicken were stored for five years at three different temperatures, viz. room temperature (∼25 °C), 4 °C, and -20 °C. These samples were subjected to crude DNA extraction by diluting them in PBS buffer and heating at 98 °C after 1 day, 7 days, 15 days, 1 month, 3 months, 6 months, 1 year, 3 years and 5 years of storage. The crude DNA was PCR-amplified with the use of DNA sexing primers as well as DNA barcoding primers. Incubation at 98 °C for 10 min of any type of sample in PBS buffer was sufficient for crude DNA extraction. There was irrelevant impact of feather type, DBS matrix nature and storage temperature on amplification success over the period of analysis. It was possible to successfully accomplish the amplification of 96 samples with the use of routine PCR reagents within 3.5-6.0 hrs. In short, economical and fast genetic analysis of commonly used avian samples is feasible after their storage for longer time at room temperature.

Simple and portable on-site system for nucleic acid-based detection of Clostridium difficile in stool samples using two columns containing microbeads and loop-mediated isothermal amplification

It is challenging to employ nucleic acid-based diagnostics for the in situ detection of Clostridium difficile from complex fecal samples because essential sample preparation and amplification procedures require various experimental resources. In this study, a simple and effective on-site nucleic acid-based detection system was used to detect C. difficile in stool samples. Two columns containing different microbeads, namely, glass and functionalized graphene oxide-coated microbeads, were designed to remove relatively large impurities by filtration and concentrate bacteria, including C. difficile, from stool samples by adsorption. The bacterial nucleic acids were effectively extracted using a small bead beater. The effectiveness of enzyme inhibitors remaining in the sample was efficiently reduced by the direct buffer developed in this study. This sample preparation kit consisting of two simple columns showed better performance in real-time polymerase chain reaction (PCR) and equivalent performance in loop-mediated isothermal amplification (LAMP) than other sample preparation kits, despite 90% simplification of the process. The amplification-ready samples were introduced into two microtubes containing LAMP pre-mixtures (one each for E. coli as an external positive control and C. difficile) by a simple sample loader, which was operated using a syringe. LAMP, which indicates amplification based on color change, was performed at 65 °C in a small water bath. The limit of detection (L.O.D) and analytical sensitivity/specificity of our simple and effective kit were compared with those of a commercial kit. C. difficile in stool samples could be detected within 1 h with 10³ cfu/10 mg using LAMP combined simple on-site detection kit.

Direct RT-PCR amplification of SARS-CoV-2 from clinical samples using a concentrated viral lysis-amplification buffer prepared with IGEPAL-630

The pandemic of 2019 caused by the novel coronavirus (SARS-CoV-2) is still rapidly spreading worldwide. Nucleic acid amplification serves as the gold standard method for confirmation of COVID-19 infection. However, challenges faced for diagnostic laboratories from undeveloped countries includes shortage of kits and supplies to purify viral RNA. Therefore, it is urgent to validate alternative nucleic acid isolation methods for SARS-CoV-2. Our results demonstrate that a concentrated viral lysis amplification buffer (vLAB) prepared with the nonionic detergent IGEPAL enables qualitative detection of SARS-CoV-2 by direct Reverse Transcriptase-Polymerase Chain Reaction (dRT-PCR). Furthermore, vLAB was effective in inactivating SARS-CoV-2. Since this method is inexpensive and no RNA purification equipment or additional cDNA synthesis is required, this dRT-PCR with vLAB should be considered as an alternative method for qualitative detection of SARS-CoV-2.

Integrated microsystems for the in situ genetic detection of dengue virus in whole blood using direct sample preparation and isothermal amplification

Owing to the frequent outbreak of dengue fever worldwide, a highly sensitive but in situ simple process diagnostic device is required to detect the dengue virus. However, the current immune affinity-based methods have sensitivity issues and nucleic acid-based diagnostic devices have not been suitable for field diagnosis due to the complexity in sample preparation. Here, a simple and fast nucleic acid-based diagnostic tool to directly detect dengue viruses in whole blood is demonstrated using a microbead-assisted direct sample preparation buffer (MB-buffer) and isothermal amplification (loop-mediated isothermal amplification, LAMP). To maximize the performance of the sample preparation process in the microfluidic chip platform, the chemical composition of the sample preparation buffer is simplified and combined with physical tools (heating and bead beating). The entire serial processes consisted of only (1) sample (whole blood) loading, (2) stirring for 90 s, (3) heating at 70 °C for 10 min, and (4) LAMP amplification in the simply designed microfluidic chip cartridge. A single syringe was utilized for sample loading and microfluidic solution transfer. Consequently, dengue viruses were qualitatively detected and discriminated with high sensitivity (LOD: 10² PFU per 200 μL of whole blood) in less than 1 hour without the use of any sophisticated system.