Importance of Architectural Asymmetry for Improved Triboelectric Nanogenerators with 3D Spacer Fabrics

Boosting the output performance of triboelectric nanogenerators via surface engineering and structure designing

Triboelectric nanogenerators (TENGs) have been utilized in a wide range of applications, including smart wearable devices, self-powered sensors, energy harvesting, and high-voltage power sources. The surface morphology and structure of TENGs play a critical role in their output performance. In this review, we analyze the working mechanism of TENGs with the aim to improve their output performance and systematically summarize the morphological engineering and structural design strategies for TENGs. Additionally, we present the emerging applications of TENGs with specific structures and surfaces. Finally, we discuss the potential future development and industrial application of TENGs. By deeply exploring the surface and structural design strategy of high-performance TENGs, it is conducive to further promote the application of TENGs in actual production. We hope that this review provides insights and guidance for the morphological and structural design of TENGs in the future.

Fabrication of CuO-NP-Doped PVDF Composites Based Electrospun Triboelectric Nanogenerators for Wearable and Biomedical Applications

A flexible and portable triboelectric nanogenerator (TENG) based on electrospun polyvinylidene fluoride (PVDF) doped with copper oxide (CuO) nanoparticles (NPs, 2, 4, 6, 8, and 10 wt.-% w.r.t. PVDF content) was fabricated. The structural and crystalline properties of the as-prepared PVDF-CuO composite membranes were characterized using SEM, FTIR, and XRD. To fabricate the TENG device, the PVDF-CuO was considered a tribo-negative film and the polyurethane (PU) a counter-positive film. The output voltage of the TENG was analyzed using a custom-made dynamic pressure setup, under a constant load of 1.0 kgf and 1.0 Hz frequency. The neat PVDF/PU showed only 1.7 V, which further increased up to 7.5 V when increasing the CuO contents from 2 to 8 wt.-%. A decrease in output voltage to 3.9 V was observed for 10 wt.-% CuO. Based on the above results, further measurements were carried out using the optimal sample (8 wt.-% CuO). Its output voltage performance was evaluated as a function of varying load (1 to 3 kgf) and frequency (0.1 to 1.0 Hz) conditions. Finally, the optimized device was demonstrated in real-time wearable sensor applications, such as human motion and health-monitoring applications (respiration and heart rate).

Biophysical Sensors Based on Triboelectric Nanogenerators

Triboelectric nanogenerators (TENGs) can not only collect mechanical energy around or inside the human body and convert it into electricity but also help monitor our body and the world by providing interpretable electrical signals during energy conversion, thus emerging as an innovative medical solution for both daily health monitoring and clinical treatment and bringing great convenience. This review tries to introduce the latest technological progress of TENGs for applications in biophysical sensors, where a TENG functions as a either a sensor or a power source, and in some cases, as both parts of a self-powered sensor system. From this perspective, this review begins from the fundamental working principles and then concisely illustrates the recent progress of TENGs given structural design, surface modification, and materials selection toward output enhancement and medical application flexibility. After this, the medical applications of TENGs in respiratory status, cardiovascular disease, and human rehabilitation are covered in detail, in the form of either textile or implantable parts for pacemakers, nerve stimulators, and nerve prostheses. In addition, the application of TENGs in driving third-party medical treatment systems is introduced. Finally, shortcomings and challenges in TENG-based biophysical sensors are highlighted, aiming to provide deeper insight into TENG-based medical solutions for the development of TENG-based self-powered electronics with higher performance for practical applications.

Washable Fabric Triboelectric Nanogenerators for Potential Application in Face Masks

In order to counteract the COVID-19 pandemic by wearing face masks, we examine washable fabric-based triboelectric nanogenerators (FTENGs). We applied the flash-spun nonwoven fabric (FS fabric) into the FTENGs, comparing the melt-blown nonwoven fabric (MB fabric) based FTENGs, which is conventionally studied in the field of energy harvesting. For reusability, all our proposed FTENGs are systematically investigated by controlling the washing conditions. After washing, the degradation ratio of the obtained output voltage is found to be only 12.5% for FS FTENGs, compared to the ratio of about 50% for the typical MB FTENGs. A rather small degradation ratio for FS fabric cases has resulted from less changed fabric structure after washing due to more dense fabric nature. Additionally, in order to improve the electrical characteristics of FS FTENGs. Note that the output voltage of FTENGs exhibits as much as 600 V.

Advances in High-Performance Autonomous Energy and Self-Powered Sensing Textiles with Novel 3D Fabric Structures

The seamless integration of emerging triboelectric nanogenerator (TENG) technology with traditional wearable textile materials has given birth to the next-generation smart textiles, i.e., textile TENGs, which will play a vital role in the era of Internet of Things and artificial intelligences. However, low output power and inferior sensing ability have largely limited the development of textile TENGs. Among various approaches to improve the output and sensing performance, such as material modification, structural design, and environmental management, a 3D fabric structural scheme is a facile, efficient, controllable, and scalable strategy to increase the effective contact area for contact electrification of textile TENGs without cumbersome material processing and service area restrictions. Herein, the recent advances of the current reported textile TENGs with 3D fabric structures are comprehensively summarized and systematically analyzed in order to clarify their superiorities over 1D fiber and 2D fabric structures in terms of power output and pressure sensing. The forward-looking integration abilities of the 3D fabrics are also discussed at the end. It is believed that the overview and analysis of textile TENGs with distinctive 3D fabric structures will contribute to the development and realization of high-power output micro/nanowearable power sources and high-quality self-powered wearable sensors.