1
|
Masturzo L, Barca P, De Masi L, Marfisi D, Traino A, Cademartiri F, Giannelli M. Voxelwise characterization of noise for a clinical photon-counting CT scanner with a model-based iterative reconstruction algorithm. Eur Radiol Exp 2025; 9:2. [PMID: 39747757 PMCID: PMC11695565 DOI: 10.1186/s41747-024-00541-2] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/09/2024] [Accepted: 11/22/2024] [Indexed: 01/04/2025] Open
Abstract
BACKGROUND Photon-counting detector (PCD) technology has the potential to reduce noise in computed tomography (CT). This study aimed to carry out a voxelwise noise characterization for a clinical PCD-CT scanner with a model-based iterative reconstruction algorithm (QIR). METHODS Forty repeated axial acquisitions (tube voltage 120 kV, tube load 200 mAs, slice thickness 0.4 mm) of a homogeneous water phantom and CTP404 module (Catphan-504) were performed. Water phantom acquisitions were also performed on a conventional energy-integrating detector (EID) scanner with a sinogram/image-based iterative reconstruction algorithm, using similar acquisition/reconstruction parameters. For smooth/sharp kernels, filtered back projection (FBP)- and iterative-reconstructed images were obtained. Noise maps, non-uniformity index (NUI) of noise maps, image noise histograms, and noise power spectrum (NPS) curves were computed. RESULTS For FBP-reconstructed images of water phantom, mean noise was (smooth/sharp kernel) 11.7 HU/51.1 HU and 18.3 HU/80.1 HU for PCD-scanner and EID-scanner, respectively, with NUI values for PCD-scanner less than half those for EID-scanner. Percentage noise reduction increased with increasing iterative power, up to (smooth/sharp kernel) 57.7%/72.5% and 56.3%/70.1% for PCD-scanner and EID-scanner, respectively. For PCD-scanner, FBP- and QIR-reconstructed images featured an almost Gaussian distribution of noise values, whose shape did not appreciably vary with iterative power. Noise maps of CTP404 module showed increased NUI values with increasing iterative power, up to (smooth/sharp kernel) 15.7%/9.2%. QIR-reconstructed images showed limited low-frequency shift of NPS peak frequency. CONCLUSION PCD-CT allowed appreciably reducing image noise while improving its spatial uniformity. QIR algorithm decreases image noise without modifying its histogram distribution shape, and partly preserving noise texture. RELEVANCE STATEMENT This phantom study corroborates the capability of photon-counting detector technology in appreciably reducing CT imaging noise and improving spatial uniformity of noise values, yielding a potential reduction of radiation exposure, though this needs to be assessed in more detail. KEY POINTS First voxelwise characterization of noise for a clinical CT scanner with photon-counting detector technology. Photon-counting detector technology has the capability to appreciably reduce CT imaging noise and improve spatial uniformity of noise values. In photon-counting CT, a model-based iterative reconstruction algorithm (QIR) allows decreasing effectively image noise. This is done without modifying noise histogram distribution shape, while limiting the low-frequency shift of noise power spectrum peak frequency.
Collapse
Affiliation(s)
- Luigi Masturzo
- Unit of Medical Physics, Pisa University Hospital "Azienda Ospedaliero-Universitaria Pisana", Pisa, Italy
| | - Patrizio Barca
- Unit of Medical Physics, Pisa University Hospital "Azienda Ospedaliero-Universitaria Pisana", Pisa, Italy
| | | | - Daniela Marfisi
- Medical Physics Department, Udine University Hospital "Azienda Sanitaria Universitaria Friuli Centrale", Udine, Italy
| | - Antonio Traino
- Unit of Medical Physics, Pisa University Hospital "Azienda Ospedaliero-Universitaria Pisana", Pisa, Italy
| | | | - Marco Giannelli
- Unit of Medical Physics, Pisa University Hospital "Azienda Ospedaliero-Universitaria Pisana", Pisa, Italy.
| |
Collapse
|
2
|
Allphin AJ, Nadkarni R, Clark DP, Gil CJ, Tomov ML, Serpooshan V, Badea CT. Turn-table micro-CT scanner for dynamic perfusion imaging in mice: design, implementation, and evaluation. Phys Med Biol 2024; 69:10.1088/1361-6560/ad6edd. [PMID: 39137802 PMCID: PMC11444210 DOI: 10.1088/1361-6560/ad6edd] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/13/2024] [Accepted: 08/13/2024] [Indexed: 08/15/2024]
Abstract
Objective.This study introduces a novel desktop micro-CT scanner designed for dynamic perfusion imaging in mice, aimed at enhancing preclinical imaging capabilities with high resolution and low radiation doses.Approach.The micro-CT system features a custom-built rotating table capable of both circular and helical scans, enabled by a small-bore slip ring for continuous rotation. Images were reconstructed with a temporal resolution of 3.125 s and an isotropic voxel size of 65µm, with potential for higher resolution scanning. The system's static performance was validated using standard quality assurance phantoms. Dynamic performance was assessed with a custom 3D-bioprinted tissue-mimetic phantom simulating single-compartment vascular flow. Flow measurements ranged from 1.51to 9 ml min-1, with perfusion metrics such as time-to-peak, mean transit time, and blood flow index calculated.In vivoexperiments involved mice with different genetic risk factors for Alzheimer's and cardiovascular diseases to showcase the system's capabilities for perfusion imaging.Main Results.The static performance validation confirmed that the system meets standard quality metrics, such as spatial resolution and uniformity. The dynamic evaluation with the 3D-bioprinted phantom demonstrated linearity in hemodynamic flow measurements and effective quantification of perfusion metrics.In vivoexperiments highlighted the system's potential to capture detailed perfusion maps of the brain, lungs, and kidneys. The observed differences in perfusion characteristics between genotypic mice illustrated the system's capability to detect physiological variations, though the small sample size precludes definitive conclusions.Significance.The turn-table micro-CT system represents a significant advancement in preclinical imaging, providing high-resolution, low-dose dynamic imaging for a range of biological and medical research applications. Future work will focus on improving temporal resolution, expanding spectral capabilities, and integrating deep learning techniques for enhanced image reconstruction and analysis.
Collapse
Affiliation(s)
- A. J. Allphin
- Quantitative Imaging and Analysis Lab, Department of Radiology, Duke University Medical Center, Durham, NC, USA
| | - R. Nadkarni
- Quantitative Imaging and Analysis Lab, Department of Radiology, Duke University Medical Center, Durham, NC, USA
| | - D. P. Clark
- Quantitative Imaging and Analysis Lab, Department of Radiology, Duke University Medical Center, Durham, NC, USA
| | - C. J. Gil
- Wallace H. Coulter Department of Biomedical Engineering, Emory University School of Medicine and Georgia Institute of Technology, Atlanta, GA, USA
| | - M. L. Tomov
- Wallace H. Coulter Department of Biomedical Engineering, Emory University School of Medicine and Georgia Institute of Technology, Atlanta, GA, USA
| | - V. Serpooshan
- Wallace H. Coulter Department of Biomedical Engineering, Emory University School of Medicine and Georgia Institute of Technology, Atlanta, GA, USA
| | - C. T. Badea
- Quantitative Imaging and Analysis Lab, Department of Radiology, Duke University Medical Center, Durham, NC, USA
| |
Collapse
|
3
|
Scapicchio C, Imbriani M, Lizzi F, Quattrocchi M, Retico A, Saponaro S, Tenerani MI, Tofani A, Zafaranchi A, Fantacci ME. Investigation of a potential upstream harmonization based on image appearance matching to improve radiomics features robustness: a phantom study. Biomed Phys Eng Express 2024; 10:045006. [PMID: 38653209 DOI: 10.1088/2057-1976/ad41e7] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/27/2023] [Accepted: 04/23/2024] [Indexed: 04/25/2024]
Abstract
Objective. Radiomics is a promising valuable analysis tool consisting in extracting quantitative information from medical images. However, the extracted radiomics features are too sensitive to variations in used image acquisition and reconstruction parameters. This limited robustness hinders the generalizable validity of radiomics-assisted models. Our aim is to investigate a possible harmonization strategy based on matching image quality to improve feature robustness.Approach.We acquired CT scans of a phantom with two scanners across different dose levels and percentages of Iterative Reconstruction algorithms. The detectability index was used as a comprehensive task-based image quality metric. A statistical analysis based on the Intraclass Correlation Coefficient was performed to determine if matching image quality/appearance could enhance the robustness of radiomics features extracted from the phantom images. Additionally, an Artificial Neural Network was trained on these features to automatically classify the scanner used for image acquisition.Main results.We found that the ICC of the features across protocols providing a similar detectability index improves with respect to the ICC of the features across protocols providing a different detectability index. This improvement was particularly noticeable in features relevant for distinguishing between scanners.Significance.This preliminary study demonstrates that a harmonization based on image quality/appearance matching could improve radiomics features robustness and heterogeneous protocols can be used to obtain a similar image appearance in terms of the detectability index. Thus protocols with a lower dose level could be selected to reduce the amount of radiation dose delivered to the patient and simultaneously obtain a more robust quantitative analysis.
Collapse
Affiliation(s)
- Camilla Scapicchio
- Department of Physics, University of Pisa, Pisa, Italy
- National Institute for Nuclear Physics, Pisa Division, Italy
| | | | - Francesca Lizzi
- National Institute for Nuclear Physics, Pisa Division, Italy
| | | | | | - Sara Saponaro
- National Institute for Nuclear Physics, Pisa Division, Italy
| | - Maria Irene Tenerani
- Department of Physics, University of Pisa, Pisa, Italy
- National Institute for Nuclear Physics, Pisa Division, Italy
| | - Alessandro Tofani
- Medical Physics Department, Azienda Toscana Nord Ovest Area Nord, Lucca, Italy
| | - Arman Zafaranchi
- Department of Physics, University of Pisa, Pisa, Italy
- National Institute for Nuclear Physics, Pisa Division, Italy
- Department of Computer Science, University of Pisa, Pisa, Italy
| | - Maria Evelina Fantacci
- Department of Physics, University of Pisa, Pisa, Italy
- National Institute for Nuclear Physics, Pisa Division, Italy
| |
Collapse
|
4
|
"Image quality evaluation of the Precise image CT deep learning reconstruction algorithm compared to Filtered Back-projection and iDose 4: a phantom study at different dose levels". Phys Med 2023; 106:102517. [PMID: 36669326 DOI: 10.1016/j.ejmp.2022.102517] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 07/25/2022] [Revised: 12/08/2022] [Accepted: 12/27/2022] [Indexed: 01/19/2023] Open
Abstract
PURPOSE To characterize the performance of the Precise Image (PI) deep learning reconstruction (DLR) algorithm for abdominal Computed Tomography (CT) imaging. METHODS CT images of the Catphan-600 phantom (equipped with an external annulus) were acquired using an abdominal protocol at four dose levels and reconstructed using FBP, iDose4 (levels 2,5) and PI ('Soft Tissue' definition, levels 'Sharper','Sharp','Standard','Smooth','Smoother'). Image noise, image non-uniformity, noise power spectrum (NPS), target transfer function (TTF), detectability index (d'), CT numbers accuracy and image histograms were analyzed. RESULTS The behavior of the PI algorithm depended strongly on the selected level of reconstruction. The phantom analysis suggested that the PI image noise decreased linearly by varying the level of reconstruction from Sharper to Smoother, expressing a noise reduction up to 80% with respect to FBP. Additionally, the non-uniformity decreased, the histograms became narrower, and d' values increased as PI reconstruction levels changed from Sharper to Smoother. PI had no significant impact on the average CT number of different contrast objects. The conventional FBP NPS was deeply altered only by Smooth and Smoother levels of reconstruction. Furthermore, spatial resolution was found to be dose- and contrast-dependent, but in each analyzed condition it was greater than or comparable to FBP and iDose4 TTFs. CONCLUSIONS The PI algorithm can reduce image noise with respect to FBP and iDose4; spatial resolution, CT numbers and image uniformity are generally preserved by the algorithm but changes in NPS for the Smooth and Smoother levels need to be considered in protocols implementation.
Collapse
|
5
|
Dehshibi MM, Chiolerio A, Nikolaidou A, Mayne R, Gandia A, Ashtari-Majlan M, Adamatzky A. Stimulating Fungi Pleurotus ostreatus with Hydrocortisone. ACS Biomater Sci Eng 2021; 7:3718-3726. [PMID: 34309374 DOI: 10.1021/acsbiomaterials.1c00752] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
Fungi cells can sense extracellular signals via reception, transduction, and response mechanisms, allowing them to communicate with their host and adapt to their environment. They feature effective regulatory protein expressions that enhance and regulate their response and adaptation to various triggers such as stress, hormones, physical stimuli such as light, and host factors. In our recent studies, we have shown that Pleurotus oyster fungi generate electrical potential impulses in the form of spike events in response to their exposure to environmental, mechanical, and chemical triggers, suggesting that the nature of stimuli may be deduced from the fungal electrical responses. In this study, we explored the communication protocols of fungi as reporters of human chemical secretions such as hormones, addressing whether fungi can sense human signals. We exposed Pleurotus oyster fungi to hydrocortisone, which was directly applied to the surface of a fungal-colonized hemp shavings substrate, and recorded the electrical activity of the fungi. Hydrocortisone is a medicinal hormone replacement that is similar to the natural stress hormone cortisol. Changes in cortisol levels released by the body indicate the presence of disease and can have a detrimental effect on physiological process regulation. The response of fungi to hydrocortisone was also explored further using X-rays to reveal changes in the fungi tissue, where receiving hydrocortisone by the substrate can inhibit the flow of calcium and, as a result, reduce its physiological changes. This research could open the way for future studies on adaptive fungal wearables capable of detecting human physiological states and biosensors built of living fungi.
Collapse
Affiliation(s)
| | - Alessandro Chiolerio
- Unconventional Computing Laboratory, UWE, Bristol, U.K.,Center for Sustainable Future Technologies, Istituto Italiano di Tecnologia, Torino, Italy
| | - Anna Nikolaidou
- Unconventional Computing Laboratory, UWE, Bristol, U.K.,Department of Architecture, UWE, Bristol, U.K
| | - Richard Mayne
- Unconventional Computing Laboratory, UWE, Bristol, U.K
| | - Antoni Gandia
- Institute for Plant Molecular and Cell Biology, CSIC-UPV, Valencia, Spain.,Mogu S.r.l., Inarzo, Italy
| | - Mona Ashtari-Majlan
- Department of Computer Science, Universitat Oberta de Catalunya, Barcelona, Spain
| | | |
Collapse
|
6
|
Impact of increasing levels of adaptive statistical iterative reconstruction on image quality in oil-based postmortem CT angiography in coronary arteries. Int J Legal Med 2021; 135:1869-1878. [PMID: 33629138 PMCID: PMC8354936 DOI: 10.1007/s00414-021-02530-1] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/08/2020] [Accepted: 02/03/2021] [Indexed: 01/03/2023]
Abstract
Introduction Postmortem multi-detector computed tomography (PMCT) has become an important part in forensic imaging. Modern reconstruction techniques such as iterative reconstruction (IR) are frequently used in postmortem CT angiography (PMCTA). The image quality of PMCTA depends on the strength of IR. For this purpose, we aimed to investigate the impact of different advanced IR levels on the objective and subjective PMCTA image quality. Material and methods We retrospectively analyzed the coronary arteries of 27 human cadavers undergoing whole-body postmortem CT angiography between July 2017 and March 2018 in a single center. Iterative reconstructions of the coronary arteries were processed in five different level settings (0%; 30%; 50%; 70%; 100%) by using an adaptive statistical IR method. We evaluated the objective (contrast-to-noise ratio (CNR)) and subjective image quality in several anatomical locations. Results Our results demonstrate that the increasing levels of an IR technique have relevant impact on the image quality in PMCTA scans in forensic postmortem examinations. Higher levels of IR have led to a significant reduction of image noise and therefore to a significant improvement of objective image quality (+ 70%). However, subjective image quality is inferior at higher levels of IR due to plasticized image appearance. Conclusion Objective image quality in PMCTA progressively improves with increasing level of IR with the best CNR at the highest IR level. However, subjective image quality is best at low to medium levels of IR. To obtain a “classic” image appearance with optimal image quality, PMCTAs should be reconstructed at medium levels of IR.
Collapse
|
7
|
Barca P, Paolicchi F, Aringhieri G, Palmas F, Marfisi D, Fantacci ME, Caramella D, Giannelli M. A comprehensive assessment of physical image quality of five different scanners for head CT imaging as clinically used at a single hospital centre-A phantom study. PLoS One 2021; 16:e0245374. [PMID: 33444367 PMCID: PMC7808662 DOI: 10.1371/journal.pone.0245374] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/24/2020] [Accepted: 12/28/2020] [Indexed: 11/18/2022] Open
Abstract
Nowadays, given the technological advance in CT imaging and increasing heterogeneity in characteristics of CT scanners, a number of CT scanners with different manufacturers/technologies are often installed in a hospital centre and used by various departments. In this phantom study, a comprehensive assessment of image quality of 5 scanners (from 3 manufacturers and with different models) for head CT imaging, as clinically used at a single hospital centre, was hence carried out. Helical and/or sequential acquisitions of the Catphan-504 phantom were performed, using the scanning protocols (CTDIvol range: 54.7–57.5 mGy) employed by the staff of various Radiology/Neuroradiology departments of our institution for routine head examinations. CT image quality for each scanner/acquisition protocol was assessed through noise level, noise power spectrum (NPS), contrast-to-noise ratio (CNR), modulation transfer function (MTF), low contrast detectability (LCD) and non-uniformity index analyses. Noise values ranged from 3.5 HU to 5.7 HU across scanners/acquisition protocols. NPS curves differed in terms of peak position (range: 0.21–0.30 mm-1). A substantial variation of CNR values with scanner/acquisition protocol was observed for different contrast inserts. The coefficient of variation (standard deviation divided by mean value) of CNR values across scanners/acquisition protocols was 18.3%, 31.4%, 34.2%, 30.4% and 30% for teflon, delrin, LDPE, polystyrene and acrylic insert, respectively. An appreciable difference in MTF curves across scanners/acquisition protocols was revealed, with a coefficient of variation of f50%/f10% of MTF curves across scanners/acquisition protocols of 10.1%/7.4%. A relevant difference in LCD performance of different scanners/acquisition protocols was found. The range of contrast threshold for a typical object size of 3 mm was 3.7–5.8 HU. Moreover, appreciable differences in terms of NUI values (range: 4.1%-8.3%) were found. The analysis of several quality indices showed a non-negligible variability in head CT imaging capabilities across different scanners/acquisition protocols. This highlights the importance of a physical in-depth characterization of image quality for each CT scanner as clinically used, in order to optimize CT imaging procedures.
Collapse
Affiliation(s)
- Patrizio Barca
- Unit of Medical Physics, Pisa University Hospital “Azienda Ospedaliero-Universitaria Pisana”, Pisa, Italy
| | - Fabio Paolicchi
- Diagnostic and Interventional Radiology, University of Pisa, Pisa, Italy
| | - Giacomo Aringhieri
- Diagnostic and Interventional Radiology, University of Pisa, Pisa, Italy
| | | | - Daniela Marfisi
- Unit of Medical Physics, Pisa University Hospital “Azienda Ospedaliero-Universitaria Pisana”, Pisa, Italy
| | | | - Davide Caramella
- Diagnostic and Interventional Radiology, University of Pisa, Pisa, Italy
| | - Marco Giannelli
- Unit of Medical Physics, Pisa University Hospital “Azienda Ospedaliero-Universitaria Pisana”, Pisa, Italy
- * E-mail:
| |
Collapse
|
8
|
Zhang L, Pelgrim GJ, Yan J, Zhang H, Vliegenthart R, Xie X. Feasibility of bronchial wall quantification in low- and ultralow-dose third-generation dual-source CT: An ex vivo lung study. J Appl Clin Med Phys 2020; 21:218-226. [PMID: 32991062 PMCID: PMC7592972 DOI: 10.1002/acm2.13032] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/08/2019] [Revised: 07/21/2020] [Accepted: 08/27/2020] [Indexed: 11/08/2022] Open
Abstract
PURPOSE To investigate image quality and bronchial wall quantification in low- and ultralow-dose third-generation dual-source computed tomography (CT). METHODS A lung specimen from a formerly healthy male was scanned using third-generation dual-source CT at standard-dose (51 mAs/120 kV, CTDIvol 3.41 mGy), low-dose (1/4th and 1/10th of standard dose), and ultralow-dose setting (1/20th). Low kV (70, 80, 90, and Sn100 kV) scanning was applied in each low/ultralow-dose setting, combined with adaptive mAs to keep a constant dose. Images were reconstructed at advanced modeled iterative reconstruction (ADMIRE) levels 1, 3, and 5 for each scan. Bronchial wall were semi-automatically measured from the lobar level to subsegmental level. Spearman correlation analysis was performed between bronchial wall quantification (wall thickness and wall area percentage) and protocol settings (dose, kV, and ADMIRE). ANOVA with a post hoc pairwise test was used to compare signal-to-noise ratio (SNR), noise and bronchial wall quantification values among standard- and low/ultralow-dose settings, and among ADMIRE levels. RESULTS Bronchial wall quantification had no correlation with dose level, kV, or ADMIRE level (|correlation coefficients| < 0.3). SNR and noise showed no statistically significant differences at different kV in the same ADMIRE level (1, 3, or 5) and in the same dose group (P > 0.05). Generally, there were no significant differences in bronchial wall quantification among the standard- and low/ultralow-dose settings, and among different ADMIRE levels (P > 0.05). CONCLUSION The combined use of low/ultralow-dose scanning and ADMIRE does not influence bronchial wall quantification compared to standard-dose CT. This specimen study suggests the potential that an ultralow-dose scan can be used for bronchial wall quantification.
Collapse
Affiliation(s)
- Lin Zhang
- Radiology DepartmentShanghai General HospitalShanghai Jiao Tong University School of MedicineShanghaiChina
- Radiology DepartmentShanghai General Hospital of Nanjing Medical UniversityShanghaiChina
| | - Gert Jan Pelgrim
- Department of RadiologyUniversity of GroningenUniversity Medical Center GroningenGroningenThe Netherlands
| | - Jing Yan
- Siemens Healthcare LtdShanghaiChina
| | - Hao Zhang
- Radiology DepartmentShanghai General HospitalShanghai Jiao Tong University School of MedicineShanghaiChina
| | - Rozemarijn Vliegenthart
- Department of RadiologyUniversity of GroningenUniversity Medical Center GroningenGroningenThe Netherlands
| | - Xueqian Xie
- Radiology DepartmentShanghai General HospitalShanghai Jiao Tong University School of MedicineShanghaiChina
| |
Collapse
|
9
|
Zhang L, Li Z, Meng J, Xie X, Zhang H. Airway quantification using adaptive statistical iterative reconstruction-V on wide-detector low-dose CT: a validation study on lung specimen. Jpn J Radiol 2019; 37:390-398. [PMID: 30820822 DOI: 10.1007/s11604-019-00818-2] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/11/2018] [Accepted: 01/31/2019] [Indexed: 12/31/2022]
Abstract
PURPOSE To evaluate the accuracy of airway quantification of adaptive statistical iterative reconstruction (ASIR)-V on low-dose CT using a human lung specimen. METHOD A lung specimen was scanned on Revolution CT with low-dose settings (20 mAs, 40 mAs and 60 mAs/100 kV) and standard-dose setting (100 mAs/120 kV). CT images were reconstructed using lung kernel with eleven ASIR-V levels from 0 to 100% with 10% interval. ASIR-V level from 0 to 100% with 10% interval was reconstructed on lung kernel. Wall area percentage (%WA) and wall thickness (WT) were measured. RESULTS Radiation dose of 20 mAs, 40 mAs and 60 mAs low-dose settings reduced by 87.6%, 75.2% and 62.8% compared to that on standard dose, respectively. Low-dose settings significantly decreased image SNR (p < 0.05) and increased noise (p < 0.001). ASIR-V level exponentially improved image SNR and linearly decreased image noise (all p < 0.001). The mean airway measurement ratios of low-dose to standard-dose were within 2% variation for %WA and within 3% variation for WT. Most %WA and WT values showed no obvious correlation with ASIR-V levels. CONCLUSION ASIR-V showed to improve image quality in low radiation dose. However, low-dose settings and ASIR-V strength did not significantly influence airway quantification values, although variation in measurements slightly increased with dose reduction.
Collapse
Affiliation(s)
- Lin Zhang
- Department of Radiology, Shanghai General Hospital of Nanjing Medical University, No. 100 Haining Road, Shanghai, 200080, People's Republic of China
| | - Zhengyu Li
- Department of Radiology, Shanghai General Hospital of Nanjing Medical University, No. 100 Haining Road, Shanghai, 200080, People's Republic of China
| | - Jie Meng
- Department of Radiology, Shanghai General Hospital of Nanjing Medical University, No. 100 Haining Road, Shanghai, 200080, People's Republic of China
| | - Xueqian Xie
- Department of Radiology, Shanghai General Hospital of Nanjing Medical University, No. 100 Haining Road, Shanghai, 200080, People's Republic of China.
| | - Hao Zhang
- Department of Radiology, Shanghai General Hospital of Nanjing Medical University, No. 100 Haining Road, Shanghai, 200080, People's Republic of China.
| |
Collapse
|