A comparative study of photoplethysmogram and piezoelectric plethysmogram signals

Pilot Assessment of Piezoelectric Transducers as a Cost-Effective Alternative to EndoPAT

INTRODUCTION

Current microvascular assessments may not be practical or accessible requiring experienced personnel and/or ongoing equipment costs. Piezoelectric transducers can reliably obtain finger blood pressure waves, similar to peripheral arterial tonometry devices; thus, they could be used to estimate microvascular function. We aimed to validate piezoelectric transducers as an alternative measure of microvascular function compared to EndoPAT.

METHODS

Twenty-five adults (aged 20-64 years) completed reactive hyperemia (5 min forearm circulatory occlusion and 3 min recovery) with piezoelectric transducers on the middle fingers and EndoPAT probes on the index fingers. Average area under the curve (AUC) of the pulse wave signal for the occluded and control arms was determined at baseline, every 30 s post-occlusion, and 10 s around the peak response. Microvascular function index (MFI) was calculated as the ratio of AUC post-occlusion to AUC baseline in the test arm, then normalized to the same ratio in the control arm. MFI at each time point was correlated with the reactive hyperemia index (RHI) from the EndoPAT.

RESULTS

The greatest significance was found between RHI and MFI at 10 s around the peak response (Spearman's r = 0.67, p = 0.0002; Pearson's r = 0.76, p = 0.00001).

CONCLUSION

MFI is a reusable and user-friendly microvascular function assessment that could provide better access to vascular health screening.

Cardiac arrhythmias classification using photoplethysmography database

Worldwide, Cardiovascular Diseases (CVDs) are the leading cause of death. Patients at high cardiovascular risk require long-term follow-up for early CVDs detection. Generally, cardiac arrhythmia detection through the electrocardiogram (ECG) signal has been the basis of many studies. This technique does not provide sufficient information in addition to a high false alarm potential. In addition, the electrodes used to record the ECG signal are not suitable for long-term monitoring. Recently, the photoplethysmogram (PPG) signal has attracted great interest among scientists as it provides a non-invasive, inexpensive, and convenient source of information related to cardiac activity. In this paper, the PPG signal (online database Physio Net Challenge 2015) is used to classify different cardiac arrhythmias, namely, tachycardia, bradycardia, ventricular tachycardia, and ventricular flutter/fibrillation. The PPG signals are pre-processed and analyzed utilizing various signal-processing techniques to eliminate noise and artifacts, which forms a stage of signal preparation prior to the feature extraction process. A set of 41 PPG features is used for cardiac arrhythmias' classification through the application of four machine-learning techniques, namely, Decision Trees (DT), Support Vector Machines (SVM), K-Nearest Neighbors (KNNs), and Ensembles. Principal Component Analysis (PCA) technique is used for dimensionality reduction and feature extraction while preserving the most important information in the data. The results show a high-throughput evaluation with an accuracy of 98.4% for the KNN technique with a sensitivity of 98.3%, 95%, 96.8%, and 99.7% for bradycardia, tachycardia, ventricular flutter/fibrillation, and ventricular tachycardia, respectively. The outcomes of this work provide a tool to correlate the properties of the PPG signal with cardiac arrhythmias and thus the early diagnosis and treatment of CVDs.

Investigating the impact of smoking habits through photoplethysmography analysis

Smoking is widely recognized as a significant risk factor in the progression of arterial stiffness and cardiovascular diseases. Valuable information related to cardiac arrhythmias and heart function can be obtained by analyzing biosignals such as the electrocardiogram (ECG) and the photoplethysmogram (PPG). The PPG signal is a non-invasive optical technique that can be used to evaluate the changes in blood volume, and thus it can be linked to the health of the vascular system.Objective. In this study, the impact of three smoking habits-cigarettes, shisha, and electronic cigarettes (e-cigarettes)-on the features of the PPG signal were investigated.Approach. The PPG signals are measured for 45 healthy smokers before, during, and after the smoking session and then processed to extract the morphological features. Quantitative statistical techniques were used to analyze the PPG features and provide the most significant features of the three smoking habits. The impact of smoking is observed through significant changes in the features of the PPG signal, indicating blood volume instability.Main results. The results revealed that the three smoking habits influence the characteristics of the PPG signal significantly, which presentseven after 15 min of smoking. Among them, shisha has the greatest impact on PPG features, particularly on heart rate, systolic time, augmentation index, and peak pulse interval change. In contrast, e-cigarettes have the least effect on PPG features. Interestingly, smoking electronic cigarettes, which many participants use as a substitute for traditional cigarettes when attempting to quit smoking, has nearly a comparable effect to regular smoking.Significance. The findings suggest that individuals who smoke shisha are more likely to develop cardiovascular diseases at an earlier age compared to those who have other smoking habits. Understanding the variations in the PPG signal caused by smoking can aid in the early detection of cardiovascular disorders and provide insight into cardiac conditions. This ultimately contributes to the prevention of the development of cardiovascular diseases and the development of a health screening system.

The 2023 wearable photoplethysmography roadmap

Photoplethysmography is a key sensing technology which is used in wearable devices such as smartwatches and fitness trackers. Currently, photoplethysmography sensors are used to monitor physiological parameters including heart rate and heart rhythm, and to track activities like sleep and exercise. Yet, wearable photoplethysmography has potential to provide much more information on health and wellbeing, which could inform clinical decision making. This Roadmap outlines directions for research and development to realise the full potential of wearable photoplethysmography. Experts discuss key topics within the areas of sensor design, signal processing, clinical applications, and research directions. Their perspectives provide valuable guidance to researchers developing wearable photoplethysmography technology.

Non-Invasive Blood Pressure Sensing via Machine Learning

In this paper, a machine learning (ML) approach to estimate blood pressure (BP) using photoplethysmography (PPG) is presented. The final aim of this paper was to develop ML methods for estimating blood pressure (BP) in a non-invasive way that is suitable in a telemedicine health-care monitoring context. The training of regression models useful for estimating systolic blood pressure (SBP) and diastolic blood pressure (DBP) was conducted using new extracted features from PPG signals processed using the Maximal Overlap Discrete Wavelet Transform (MODWT). As a matter of fact, the interest was on the use of the most significant features obtained by the Minimum Redundancy Maximum Relevance (MRMR) selection algorithm to train eXtreme Gradient Boost (XGBoost) and Neural Network (NN) models. This aim was satisfactorily achieved by also comparing it with works in the literature; in fact, it was found that XGBoost models are more accurate than NN models in both systolic and diastolic blood pressure measurements, obtaining a Root Mean Square Error (RMSE) for SBP and DBP, respectively, of 5.67 mmHg and 3.95 mmHg. For SBP measurement, this result is an improvement compared to that reported in the literature. Furthermore, the trained XGBoost regression model fulfills the requirements of the Association for the Advancement of Medical Instrumentation (AAMI) as well as grade A of the British Hypertension Society (BHS) standard.

Photoplethysmography-Based Respiratory Rate Estimation Algorithm for Health Monitoring Applications

Purpose

Respiratory rate can provide auxiliary information on the physiological changes within the human body, such as physical and emotional stress. In a clinical setup, the abnormal respiratory rate can be indicative of the deterioration of the patient's condition. Most of the existing algorithms for the estimation of respiratory rate using photoplethysmography (PPG) are sensitive to external noise and may require the selection of certain algorithm-specific parameters, through the trial-and-error method.

Methods

This paper proposes a new algorithm to estimate the respiratory rate using a photoplethysmography sensor signal for health monitoring. The algorithm is resistant to signal loss and can handle low-quality signals from the sensor. It combines selective windowing, preprocessing and signal conditioning, modified Welch filtering and postprocessing to achieve high accuracy and robustness to noise.

Results

The Mean Absolute Error and the Root Mean Square Error of the proposed algorithm, with the optimal signal window size, are determined to be 2.05 breaths count per minute and 2.47 breaths count per minute, respectively, when tested on a publicly available dataset. These results present a significant improvement in accuracy over previously reported methods. The proposed algorithm achieved comparable results to the existing algorithms in the literature on the BIDMC dataset (containing data of 53 subjects, each recorded for 8 min) for other signal window sizes.

Conclusion

The results endorse that integration of the proposed algorithm to a commercially available pulse oximetry device would expand its functionality from the measurement of oxygen saturation level and heart rate to the continuous measurement of the respiratory rate with good efficiency at home and in a clinical setting.

Supplementary Information

The online version contains supplementary material available at 10.1007/s40846-022-00700-z.

Piezoelectric Dynamics of Arterial Pulse for Wearable Continuous Blood Pressure Monitoring

Piezoelectric arterial pulse wave dynamics are traditionally considered to be similar to those of typical blood pressure waves. However, achieving accurate continuous blood pressure wave monitoring based on arterial pulse waves remains challenging, because the correlation between piezoelectric pulse waves and their related blood pressure waves is unclear. To address this, the correlation between piezoelectric pulse waves and blood pressure waves is first elucidated via theoretical, simulation, and experimental analysis of these dynamics. Based on this correlation, the authors develop a wireless wearable continuous blood pressure monitoring system, with better portability than conventional systems that are based on the pulse wave velocity between multiple sensors. They explore the feasibility of achieving wearable continuous blood pressure monitoring without motion artifacts, using a single piezoelectric sensor. These findings eliminate the controversy over the arterial pulse wave piezoelectric response, and can potentially be used to develop a portable wearable continuous blood pressure monitoring device for the early prevention and daily control of hypertension.

Towards a portable-noninvasive blood pressure monitoring system utilizing the photoplethysmogram signal

Blood pressure (BP) responds instantly to the body's conditions, such as movements, diseases or infections, and sudden excitation. Therefore, BP monitoring is a standard clinical measurement and is considered one of the fundamental health signs that assist in predicting and diagnosing several cardiovascular diseases. The traditional BP techniques (i.e. the cuff-based methods) only provide intermittent measurements over a certain period. Additionally, they cause turbulence in the blood flow, impeding the continuous BP monitoring, especially in emergency cases. In this study, an instrumentation system is designed to estimate BP noninvasively by measuring the PPG signal utilizing the optical technique. The photoplethysmogram (PPG) signals were measured and processed for ≈ 450 cases with different clinical conditions and irrespective of their health condition. A total of 13 features of the PPG signal were used to estimate the systolic and diastolic blood pressure (SBP and DBP), utilizing several machine learning techniques. The experimental results showed that the designed system is able to effectively describe the complex-embedded relationship between the features of the PPG signal and BP (SBP and DBP) with high accuracy. The mean absolute error (MAE) ± standard deviation (SD) was 4.82 ± 3.49 mmHg for the SBP and 1.37 ± 1.65 mmHg for the DBP, with a mean error (ME) of ≈ 0 mmHg. The estimation results are consistent with the Association for the American National Standards of the Association for the Advancement of Medical Instrumentation (AAMI) and achieved Grade A in the British Hypertension Society (BHS) standards for the DBP and Grade B for the SBP. Such a study effectively contributes to the scientific efforts targeting the promotion of the practical application for providing a portable-noninvasive instrumentation system for BP monitoring purposes. Once the BP is determined with sufficient accuracy, it can be utilized further in the early prediction and classification of various arrhythmias such as hypertension, tachycardia, bradycardia, and atrial fibrillation (as the early detection can be a critical issue).