Comparison of 2D 4K vs. 3D HD laparoscopic imaging systems using a pelvitrainer model: a randomized controlled study

Advantages of new generation colonoscopes on adenoma detection: A propensity-score matching study

BACKGROUND

Recently, Olympus Corporation released new scopes (XZ1200/EZ1500). However, there have been few reports on this topic, although improvement in adenoma detection rate (ADR) by texture and color enhancement imaging (TXI) or computer-aided detection system (CAD) has been reported.

AIM

To investigate the effects of the scope on the detection of adenomas and sessile serrated lesions (SSLs).

METHODS

The subjects were patients who underwent pancolonic chromoendoscopy using the EVIS X1 video system center between May 2023 and October 2024. The patients were divided into the new (CF-XZ1200/CF-EZ1500) and 290 series (CF-HQ290Z/PCF-H290Z) groups. Propensity score matching was performed for age, sex, examination purpose, endoscopist, preparation, TXI use, and CAD use. The effects of the scope were analyzed in terms of the ADR, SSL detection rate (SDR), and mean number of adenomas per colonoscopy (APC).

RESULTS

Of the 7014 patients enrolled, 2138 pairs were extracted by propensity score matching (mean age 55.4 years, 45.5% male). The new scopes group had a significantly higher ADR than the 290 series group [51.5% vs 45.5%, odds ratio (OR) = 1.27, 95%CI: 1.13-1.43, P < 0.001]. Similarly, the new scopes group had significantly higher SDR (7.8% vs 5.7%, OR = 1.41, 95%CI: 1.11-1.80, P = 0.005) and APC (0.90 vs 0.76, OR = 1.11, 95%CI: 1.05-1.17, P < 0.001) than the 290 series group.

CONCLUSION

In conclusion, the new scope (CF-XZ1200/CF-EZ1500) enhanced the detection of adenomas and SSLs compared to the old ones (290 series).

Transferability of laparoscopic skills acquired from three-dimensional high-definition and ultra-high definition endovision system to two-dimensional high-definition endovision system: an ex-vivo randomized study

Three-dimensional high-definition (3D HD) and ultra-high-definition (4 K HD) endovision systems are rapidly adopted in academic setting. However, transferability of laparoscopic skills acquired from these systems to two-dimensional high-definition (2D HD) endovision system is not known. Forty stereo-enabled surgical residents were randomized into two groups. They performed three standardized surgical tasks, Task 1(Peg transfer), Task 2(Precision touch on uneven surface) and Task 3(Surgical knotting on rubber tube) for 15 repetitions using either 3D HD or 4 K HD. Both groups then performed the same tasks using 2D HD for 5 repetitions. Their performances were evaluated for execution time (speed) and error scores (safety). The residents in 3D HD group performed all three tasks significantly faster than residents in 4 K HD group with comparable error scores. The time taken to complete the tasks on 2D HD were comparable between residents trained in 3D HD and 4 K HD in two out of three tasks (p = 0.027, P = 0.115, p = 0.368 in task 1, 2 and 3 respectively). However, in two out of three tasks, residents trained on 3D HD committed significantly more errors than residents trained on 4 K HD (p < 0.0001, p < 0.001 in task 1 and task 2 respectively). Skill acquired on 4 K HD seems transferable to 2D HD environment. Participants trained in 3D HD made more errors while performing the tasks in 2D HD. It may be prudent to offer additional training on 2D HD to residents trained on 3D HD for safer laparoscopic surgical practice.

Comparison of two-dimensional imaging to three-dimensional modeling of intrahepatic portosystemic shunts using computed tomography angiography

Computed tomography angiography (CTA) is used for the diagnosis of intrahepatic portosystemic shunts (IHPSS). When planning for transcatheter intervention, caudal vena cava (CVC) measurements are typically obtained from two-dimensional (2D) imaging to aid in stent selection. We hypothesized that clinically applicable three-dimensional (3D) IHPSS models can be generated, and CVC measurements will not differ between 2D images and 3D models. Computed tomography angiography datasets from client-owned dogs with IHPSS at the University of Georgia Veterinary Teaching Hospital from 2016 to 2022 were analyzed. Materialise Mimics 25.0 and 3-matic 17.0 were used for 3D modeling. Caudal vena cava diameters were measured in 2D dorsal and transverse planes 20 mm cranial and caudal from the shunt ostium and were compared with CVC diameters from 3D models. Length was measured in the 2D dorsal plane between midpoints of each diameter and compared to the 3D model length. Data are presented as mean (SD), and intraclass correlation coefficients were performed. Three-dimensional models were generated for 32 IHPSS (15 right-, 12 left-, and five central-divisional). Two-dimensional dorsal and transverse area-associated diameter measurements were 16.7 mm (5.6) and 15.5 mm (4.2) cranial; 14.9 mm (4.2) and 14.3 mm (3.7) caudal. Three-dimensional area-associated diameter measurements were 15.3 mm (4.4) cranial and 14.0 mm (3.6) caudal. The 2D length was 61.5 mm (7.1) compared with 3D 59.9 mm (7.2). Intraclass correlation coefficients comparing 2D and 3D diameters were all >0.80, indicating very good agreement, with good agreement (>0.60) for length. Clinically applicable 3D IHPSS models can be generated using engineering software. Measurements from 3D models are consistent with 2D planar imaging. Both 2D CTA and 3D virtual models can be utilized for preprocedural planning, depending on clinician preference.

Comparison of 2D 4K vs. 3D HD laparoscopic imaging systems in bariatric surgery: study protocol for a randomized controlled prospective trial

BACKGROUND

Vision is an important and defining element of laparoscopy and significantly affects the outcome of surgery in terms of time, error, and precision. Several new imaging systems have become available for laparoscopic surgery, including three-dimensional (3D) high-definition (HD) and two-dimensional (2D) ultra-high-resolution (4K) monitors. 3D HD systems offer a number of potential benefits to surgeons and patients over traditional 2D systems, including reduced operating time, blood loss, and hospital stay. However, the performance of 3D systems against the new, ultra-high definition 4K systems is barely known and highly controversial. There is a paucity of studies comparing them in clinical settings. The aim of this study is to compare 2D 4K and 3D HD perspectives in gastric bypass surgery.

METHODS

Forty-eight patients with an indication for gastric bypass will be randomized to receive laparoscopic gastric bypass surgery using either 2D 4K or 3D HD systems. The operations will be performed by a well-coordinated team of three senior surgeons. The primary outcome is operative time. Secondary outcomes include intraoperative complications, blood loss, operator workload as assessed by the validated Surg-TLX questionnaire, and postoperative complications according to the Clavien-Dindo classification. An interim analysis is planned after enrollment of 12 participants for each group.

DISCUSSION

This prospective, randomized trial is designed to test the hypothesis that the use of a 3D HD system will result in a significant improvement in operative time compared to a 2D 4K system in bariatric surgery. The objective is to provide clinical evidence for new laparoscopic imaging systems and to evaluate potential benefits.

TRIAL REGISTRATION

This trial is registered at clinicaltrials.gov under the identifier NCT05895058. Registered 30 May 2023. BASEC2023-D0014 [Registry ID Swissethics, approved 3 May 2023]. SNCTP000005489 [SNCTP study register, last updated 13 July 2023].

Endoscopic-assisted Surgical Removal of Infected Interosseous Wires 40 Years After Mandibular Surgery

We demonstrate a highly reliable minimally invasive treatment for removal of residual wire from the mandible. The patient was a 55-year-old Japanese man who was referred to our department for a fistula in his submental area. The patient had undergone open reduction and fixation with wires for mandibular fractures (left parasymphysis, right angle fracture) more than 40 years prior and mandibular tooth extraction and drainage 6 months prior. Minimally invasive endoscopy-assisted wire removal surgery was performed under general anesthesia with good visualization in a narrow surgical field. Bone resection was minimized using an ultrasonic cutting instrument with a wide choice of tip shapes. The use of endoscopy with ultrasonic cutting tools makes it possible to effectively utilize narrow surgical fields with a small skin incision and minimal bone cutting. The advantages and disadvantages of the newer endoscopic systems in oral and maxillofacial surgical units are discussed.

Evaluation of the learning curve for robotic single-anastomosis duodenal–ileal bypass with sleeve gastrectomy

Background

The robotic surgical system is being used in various bariatric procedures. However, only a few studies with very small sample size are present on robotic single-anastomosis duodenal–ileal bypass with sleeve gastrectomy (SADI-S). Moreover, to date, the learning curve of robotic SADI-S has been poorly evaluated yet.

Objective

This retrospective study aimed to estimate the learning curve of robotic SADI-S.

Methods

102 consecutive patients who underwent robotic SADI-S between March 2020 and December 2021 were included. Textbook outcome standard was performed to comprehensively evaluate clinical outcome of robotic SADI-S. Based on the textbook outcome, we evaluated the learning curve of robotic SADI-S by the cumulative sum (CUSUM) method.

Results

The mean operative time was 186.13 ± 36.91 min. No conversion to laparotomy or deaths occurred during the study period. The rate of complications was 6.9% (n = 7), of which major complications were identified in 2.9% (n = 3), including 2 gastric leakages and 1 respiratory failure. A total of 60 patients reached the textbook outcome standard. The rate of textbook outcome was positive and was steadily increasing after the number of surgical cases accumulated to the 58th case. Taking the 58th case as the boundary, all the patients were divided into the learning stage group (the first 58 patients) and mastery stage group (the last 44 patients). The rate of complications, proportion of abdominal drainage tubes and postoperative hospital stay were significantly higher in the learning stage group compared with the mastery stage group (P < 0.05). No significant difference was observed between the two groups in terms of patient demographic data, operative times, reoperations and readmission.

Conclusion

Robotic SADI-S is a feasible and reproducible surgical technique with a learning curve of 58 cases.