Experimental investigation of spray characteristics of ethyl esters in a constant volume chamber

Review of physicochemical properties and spray characteristics of biodiesel

The United Nations Sustainable Development Goals by 2030 deal with seventeen goals for the planet's sustainability. The present review focuses on affordable and clean energy through the effective combustion of fuels with minimal pollution. Effective fuel spray characteristics are essential for combustion among various parameters and fuel properties. The inherent nature of the fuel has a functional relationship with the injection and injectors' conditions. Therefore, the study of fuels' physicochemical properties is essential. This review deals with the spray characteristics of biodiesel. Biodiesels in its purest form and blended with diesel, di-n-butyl ether, dimethyl ether, diethyl ether, ethanol, and butanol are considered for the study. The physicochemical properties of biodiesels, injection conditions, and injector constraints are analyzed to understand the spray process. The atomization features such as spray tip penetration, Sauter mean diameter, spray cone angle, spray area, and spray volume are analyzed. The chemical properties of biodiesel are utilized to describe the spray's transient behavior. In addition, supporting systems for spray diagnostics and models are also discussed. The highlighted significant spray challenges features and future research direction benefit the fuel and combustion community.

Spray Analysis of Biodiesels Derived from Various Biomass Resources in a Constant Volume Spray Chamber

This research aimed to analyze the spray characteristics of various biodiesels, which have rarely been investigated in terms of spray analysis in the literature compared to fossil diesel. For this purpose, four different methyl ester-type biodiesels were produced from canola, corn, cottonseed, and sunflower oils. These feedstocks were selected due to their wide availability in Turkey and being among the significant resources for biodiesel production. Measured physical properties of biodiesel samples showed that biodiesel fuels had, on average, 1.7 to 1.9 times higher viscosities, 5.3 to 6.6% larger densities, and 37 to 39.1% higher contact angle values than the reference diesel fuel. Spray characteristics of all fuels were experimentally examined in a constant volume spray chamber under chamber pressures of 0, 5, 10, and 15 bar and injection pressures of 600, 800, and 1000 bar. All tested biodiesels performed, on average, 3 to 20% longer spray penetration lengths, 5 to 30% narrower spray cone angles, and 5-18% lesser spray areas than the reference diesel fuel under chamber pressures of 5 and 10 bar. No significant differences occurred at 15 bar ambient pressure between biodiesels and diesel. In addition, analytical and empirical predictions showed that biodiesels had around 21.2-35.1% larger SMD values and approximately 7% lower air entrainment.