Facile green synthesis of CuO- ZnO nanocomposites from Argyreia nervosa leaves extract for photocatalytic degradation of Rhodamine B dye

Boosting Photocatalytic Activity in Rhodamine B Degradation Using Cu-Doped ZnO Nanoflakes

The present investigation examined how substituting some Cu2+ ions for Zn2+ ions could increase zinc oxide (ZnO) photocatalytic activity toward the reduction of Rhodamine B. Phase composition, the presence of functional groups, optical properties, emission spectra, and surface morphology of ZnO nanoflakes (NFs) were evaluated using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), UV-visible spectroscopy (UV-vis), photoluminescence (PL) spectrophotometer, and scanning electron microscopy (SEM). To investigate the photocatalytic capabilities of Cu-doped ZnO NFs driven by visible light/sunlight, Rhodamine B dyes were photocatalytically degraded in water using UV-visible absorption spectroscopy. Using Williamson-Hall analysis of the XRD data, it was discovered that the internal strain of the Cu-doped ZnO NFs was altered. UV-vis absorption showed that the energy gap of the semiconducting ZnO NFs shrank when Cu was substituted. FT-IR studies revealed that the surface of the Cu-doped ZnO NFs contained greater amounts of reactive oxidizing species. PL studies revealed that the ZnO NFs' surface defects were being caused by the Cu substitution. According to SEM research, more surface fault NFs formed when the concentration of Cu increased. The photocatalytic activity was enhanced by the production of these NFs. The UV-vis absorption spectra showed that Cu-doped ZnO NFs were more effective than pure ZnO at degrading the rhodamine B dye (RhB). Finally, it was shown that replacing Zn2+ ions with Cu2+ ions improved the photodegradation of the rhodamine B dye. According to this study, Cu-doped ZnO NFs are an excellent choice for wastewater treatment.

Eco-friendly synthesis of ZnO, CuO, and ZnO/CuO nanoparticles using extract of spent Pleurotus ostreatus substrate, and their antioxidant and anticancer activities

Biosynthesis techniques for nanomaterials have advanced significantly, promoting eco-friendly synthesis chemistry as a sustainable alternative to conventional methods. This study presents a novel and environmentally friendly approach for synthesizing nanoparticulate ZnO, CuO, and ZnO/CuO nanocomposites using aqueous extracts of Pleurotus ostreatus spent substrate, is reported. The structural, optical, and morphological properties of the synthesized NPs were analysed. A hexagonal phase of ZnO NPs and a monoclinic phase of CuO NPs were obtained according to the X-ray diffraction analysis. A reduction in the peak intensity of these metal oxides was observed in the ZnO/CuO NPs due to reduced crystallinity. The absorption spectra, obtained from the UV-vis analysis, showed peaks at 354, 365, and 525 nm for the ZnO, CuO, and ZnO/CuO NPs, respectively. An anticancer assay of the NPs was conducted using human embryonic kidney (HEK 293) and cervical carcinoma (HeLa) cell lines, while a 1,1-diphenyl-2-picrylhydrazyl (DPPH) assay was used for the antioxidant evaluation. The ZnO, CuO, and ZnO/CuO NPs showed higher antioxidant potency with IC50 of 2.15, 2.16, and 3.18 µg/mL, respectively, than the ascorbic acid (4.25 µg/mL). This indicates that the nanoparticles were more effective in capturing DPPH free radicals. Anticancer assays showed strong cytotoxic effects for all nanoparticles, with ZnO NPs exhibiting the highest activity (IC50: 1.94 μM for HEK 293 cells, 3.23 μM for HeLa cells), surpassing CuO and ZnO/CuO NPs. Cell viability for both HEK 293 and HeLa cells decreased as nanoparticle concentration increased, confirming dose-dependent cytotoxicity. The green synthesized metal oxides and their composite have the potential for biomedical applications.

Enhanced photocatalytic degradation of Rhodamine B using polyaniline-coated XTiO3(X = Co, Ni) nanocomposites

In this study, novel polyaniline-coated perovskite nanocomposites (PANI@CoTiO3 and PANI@NiTiO3) were synthesized using an in situ oxidative polymerization method and evaluated for the photocatalytic degradation of Rhodamine B (RhB) a persistent organic pollutant. The nanocomposites displayed significantly enhanced photocatalytic efficiency compared to pure perovskites. The 1%wt PANI@NiTiO3 achieved an impressive 94% degradation of RhB under visible light after 180 min, while 1wt.% PANI@CoTiO3 reached 87% degradation under UV light in the same duration. X-ray diffraction (XRD) confirmed that the crystalline structures of CoTiO3 and NiTiO3 remained intact post-polymerization. At the same time, Fourier transform infrared spectroscopy (FTIR) verified the successful deposition of PANI through characteristic functional group vibrations. Diffuse reflectance spectroscopy (DRS) revealed reduced band gaps of 2.63 eV for 1wt.% PANI@NiTiO3 and 2.46 eV for 1wt.% PANI@CoTiO3, enhancing light absorption across UV and visible ranges. Scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS) analysis demonstrated the uniform distribution of PANI, ensuring consistent surface activity and efficient charge transfer. The photocatalytic test confirmed a pseudo-first-order degradation mechanism. The study elucidates the degradation mechanism through intermediate identification via HPLC-MS analysis, highlighting N-de-ethylation, aromatic ring cleavage and eventual mineralization into CO2 and H2O as critical pathways. Furthermore, the 1wt.%PANI@NiTiO3 nanocomposite demonstrated excellent stability and recyclability, maintaining its degradation efficiency over four consecutive cycles with minimal change. These findings highlight the potential of PANI@XTiO3 nanocomposites for sustainable and efficient wastewater treatment, addressing diverse environmental challenges by tailoring photocatalysts to specific light sources.

Recent advances and challenges of the green ZnO-based composites biosynthesized using plant extracts for water treatment

Recently, there has been a notable rise in the prevalence of persistent pollutants in the environment, posing a significant hazard due to their toxicity and enduring nature. Conventional wastewater treatment methods employed in treatment plants rarely address these persistent pollutants adequately. Meanwhile, the concept of green synthesis has garnered considerable attention, owing to its environmentally friendly approach that utilizes fewer toxic chemicals and solvents. The utilization of materials derived from sustainable sources presents a promising avenue for solving pressing environmental concerns. Among the various sources of biological agents, plants stand out for their accessibility, eco-friendliness, and rich reserves of phytochemicals suitable for material synthesis. The plant extract-mediated synthesis of zinc oxide nanoparticles (ZnONPs) has emerged as a promising solution for applications in wastewater treatment. Thorough investigations into the factors influencing the properties of these green ZnONPs are essential to establish a detailed and reliable synthesis process. Major weaknesses inherent in ZnONPs can be addressed by changing the optical, magnetic, and interface properties through doping with various semiconductor materials. Consequently, research efforts to mitigate water pollution are being driven by both the future prospects and limitations of ZnO-based composites. This review underscores the recent advancements of plant extract-mediated ZnONP composites for water treatment.

Optimization of Spore Production in Bacillus coagulans Using Response Surface Methodology Approach

Due to its spore-forming ability, Bacillus coagulans has advantages over the other non-spore-forming probiotics. Among them, survival and stability during food processing and storage, resistance to acid pH, and digestive enzymes are important. However, there are few studies on the quality and amount of sporulation in B. coagulans. This study investigated the spore densities and formation efficiency of B. coagulans. The optimal medium formulation consisted of yeast extract (1.00 g L-1), potassium acetate (20.00 g L-1), and MnSO4 (0.01 g L-1 and 0.03 g L-1). After reaching the optimal medium, a response surface regression equation was established based on the results of central composite design (CCD) experimental designs to optimize time, temperature, and pH parameters. The predicted results thus obtained were in good agreement (R2 = 95.19%) with the results obtained by performing experiments. Multiple regression analysis and analysis of variance (ANOVA) showed that pH is negative, and temperature and time dose are positive factors. The maximum spore cell densities by optimization plots have obtained 9.80 log at temperature 83.77 °C, pH 3.05, and time 111.19 h, considering that B. coagulans needs special environmental and cellular conditions to enter the sporulation stage. In this study, the composition of the culture medium and factors such as temperature, time, and pH were considered influencing factors in B. coagulans sporulation.

Novel surface structure of LaFeO3/nitrogen-deficient g-C3N4 nanocomposites to improve visible-light photocatalytic performance toward phenol removal

Herein, novel surface structure LaFeO3/nitrogen-deficient g-C3N4 nanocomposites (LaFeO3/g-C3N4-H) have been successfully synthesized by a two-step process. First, nitrogen-deficient graphitic carbon nitride (g-C3N4-H) was produced by thermally condensing melamine that had been treated with acetic acid as a precursor. After that, LaFeO3 was incorporated into the g-C3N4-H nanosheets. The as-prepared nanostructured materials were characterized by XRD, FT-IR, N2 adsorption-desorption experiments, FESEM, and TEM, demonstrating the formation of interfacial interaction and heterogeneous structure in LaFeO3/g-C3N4-H nanocomposites. Additionally, UV-vis diffuse reflectance spectra (DRS) and photoluminescence spectra (PL) have been used to assess the optical properties of the nanohybrids. The results show that the LaFeO3/g-C3N4-H nanocomposite was successfully produced with a reliable interfacial interface, and produced a good heterojunction relationship between g-C3N4-H and LaFeO3 which may significantly boost the photocatalytic activity as compared to prinstine g-C3N4 and LaFeO3. Phenol degradation under visible light irradiation was used to test the photocatalytic activity of LaFeO3/g-C3N4-H, and the results showed that 10%-LaFeO3/g-C3N4-H had significant photocatalytic activity and remarkable adsorption efficiency, with an overall removal rate of phenol up to 88% after 180 min of visible light irradiation. This study may present a novel method for developing highly efficient artificial photocatalytic systems.

Preparation of high-performance supercapacitor electrode with nanocomposite of CuO/NCNO flower-like

Due to the importance of energy storage systems based on supercapacitors, various studies have been conducted. In this research CuO, NCNO and the flower like CuO/NCNO have been studied as a novel materials in this field. The resulte showed that the synthesized CuO nanostructutes have flower like morphology which studied by FE-SEM analisis. Further, the XRD pattern confirmed the crystalline properties of the CuO/NCNO nanocomposite, and the Raman verified the functional groups and vibrations of the components of CuO/NCNO nanocomposite. In a two-electrode system at a current density of 4 A/g, the capacitance, power density, and energy density were 450 F/g, 3200 W/kg, and 98 Wh/kg, respectively. The charge transfer resistances of CuO and NCNO/CuO electrodes obtained 8 and 2 Ω respectively, which show that the conductivity and supercapacitive properties of nanocomposite are better than pure components. Also, the stability and low charge transfer resistance are other advantages obtained in a two-symmetrical electrode investigation. The stability investigation showed that after 3000 consecutive cycles, only 4% of the initial capacitance of the CuO/NCNO electrode decreased.

A Modified Electrochemical Sensor Based on N,S-Doped Carbon Dots/Carbon Nanotube-Poly(Amidoamine) Dendrimer Hybrids for Imatinib Mesylate Determination

Imatinib mesylate, an anticancer drug, is prescribed to treat gastrointestinal stromal tumors and chronic myelogenous leukemia. A hybrid nanocomposite of N,S-doped carbon dots/carbon nanotube-poly(amidoamine) dendrimer (N,S-CDs/CNTD) was successfully synthesized and used as a significant modifier to design a new and highly selective electrochemical sensor for the determination of imatinib mesylate. A rigorous study with electrochemical techniques, such as cyclic voltammetry and differential pulse voltammetry, was performed to elucidate the electrocatalytic properties of the as-prepared nanocomposite and the preparation procedure of the modified glassy carbon electrode (GCE). A higher oxidation peak current was generated for the imatinib mesylate on a N,S-CDs/CNTD/GCE surface compared to the GCE and CNTD/GCE. The N,S-CDs/CNTD/GCE showed a linear relationship between the concentration and oxidation peak current of the imatinib mesylate in 0.01-100 μM, with a detection limit of 3 nM. Finally, the imatinib mesylate's quantification in blood-serum samples was successfully performed. The N,S-CDs/CNTD/GCE's reproducibility and stability were indeed excellent.