Laccase-conjugated amino-functionalized nanosilica for efficient degradation of Reactive Violet 1 dye

Innovative laccase-based hollow packed-bed reactor for continuous treatment of hospital wastewater

This study reports on laccase-mediated removal of trace organic compounds (TrOCs) from real hospital wastewater (HWW) in a packed-bed reactor (PBR). The reactor column consisted of a catalytic bed of amino-functionalized mesoporous silica microspheres attached to a hollow polyethylene packing on which a Trametes hirsuta laccase was immobilized. This bed material had the advantage of significantly limiting pressure drop, which is one of the major drawbacks of PBRs operating in continuous mode. The PBR was fed with HWW, previously filtered through a 0.45-µm PTFE filter. The HWW was used either unspiked or spiked at 1 µg L-1 with acetaminophen, ibuprofen, naproxen, ketoprofen, mefenamic acid, indomethacin, and carbamazepine. A kinetic model combining the substrate conversion (1st-order kinetic) and the biocatalyst inactivation (1st-order kinetic) was developed and implemented, using acetaminophen as a model phenolic compound. After validation, the model showed good fit with experimental data and robustness regarding extended time operation with real HWW under uncontrolled conditions (pH, unbuffered media, ambient temperature). After 6 h of contact time, more than 95% of acetaminophen and mefenamic acid were removed in the PBR. In addition, toxicity tests showed that the laccase-based treatment resulted in a reduction in toxicity to Daphnia magna. The treated HWW did not significantly affect the mobility of Daphnia magna, unlike untreated HWW.

Development and optimization of a silica-bound laccase biocatalyst and its application in hospital wastewater treatment

Laccase from Trametes hirsuta was immobilized on amino-functionalized silica by adsorption and covalent binding using glutaraldehyde (GLA) and glyoxal (GLX) as cross-linkers. The immobilization process was optimized applying the Box-Behnken methodology. The immobilized biocatalysts were characterized using scanning electron microscopy, Brunauer-Emmett-Teller surface area and Barrett-Joyner-Halenda pore size analyses, and elemental analysis. Covalent immobilization proved to be better than adsorption based on the specific activity, immobilization yield, and stability in hospital wastewater (HWW) of the biocatalysts. The biocatalyst prepared using GLA under optimized conditions (laccase loading: 10 kU/L, pH 5, temperature: 5 °C, immobilization time: 8 h, and GLA amount: 100 mM) demonstrated better stability to pH, temperature, and other denaturants, compared to free laccase. It exhibited good catalytic potential to remove phenolic compound acetaminophen (83%) and other trace organic contaminants (TrOCs) such as mefenamic acid (86%), indomethacin (73%), carbamazepine (62%), ibuprofen (43%), naproxen (37%), and ketoprofen (27%), in a mixture from a real non-treated hospital effluent spiked with 1 µg/L of each of the above compounds. In addition, the measured catalytic parameters (Km, kcat and kcat/Km) of acetaminophen (free laccase vs. immobilized laccase (AFHMS-GLA-Lac)) are relatively similar. This is one of the first evaluative studies on different immobilization strategies using the Box-Behnken optimization method to develop efficient and stable laccase biocatalysts by immobilization on amino-functionalized silica for real hospital wastewater treatment.

Degradation of Procion Brilliant Purple H-3R using ultrasound coupled with advanced oxidation processes

The complexity of wastewater matrix poses a challenge for conventional processes especially due to the presence of refractory compounds such as dyes. The present work focuses on utilizing ultrasound-induced cavitation in conjunction with different oxidants such as hydrogen peroxide, Fenton's reagent and potassium persulfate to treat Procion Brilliant Purple H-3R dye containing wastewater. The impact of various operating parameters as pH, frequency, and power on degradation levels has been studied with the aim of optimizing degradation. The optimal conditions for the degradation of Procion Brilliant Purple H-3R were determined as pH of 12, frequency of 22 kHz, and power of 250 W, resulting in a maximum degradation of 70.25%. Combination of a cavitation reactor with hydrogen peroxide, Fenton reagent, and KPS was then applied at optimized conditions, which confirmed a notable enhancement in degradation compared to the only ultrasound based process. Specifically, the degradation extent was 95.99% for combination with H2O2 at 0.5 g/L loading, 99.79% for combination with Fenton at H2O2/Fe2+ ratio of 50:1, and 99.05% for combination with KPS at loading of 0.75 g/L. The kinetic rate constant for the combined approach of US + Fenton was also maximum at 7.47 × 10-1 L mg-1 min-1. Toxicity analysis was conducted on two bacterial strains, Escherichia coli and Staphylococcus aureus, using the wastewater in native form and after treatment. The various processes were evaluated in terms of the cavitational yield and overall treatment cost and it was determined that US + Fenton process is the most efficient treatment method for fully degrading Procion Brilliant Purple H-3R, particularly at larger scales of operation and cost efficiently as demonstrated in the work.

Oxidoreductase enzymes: Characteristics, applications, and challenges as a biocatalyst

Oxidoreductases are enzymes with distinctive characteristics that favor their use in different areas, such as agriculture, environmental management, medicine, and analytical chemistry. Among these enzymes, oxidases, dehydrogenases, peroxidases, and oxygenases are very interesting. Because their substrate diversity, they can be used in different biocatalytic processes by homogeneous and heterogeneous catalysis. Immobilization of these enzymes has favored their use in the solution of different biotechnological problems, with a notable increase in the study and optimization of this technology in the last years. In this review, the main structural and catalytical features of oxidoreductases, their substrate specificity, immobilization, and usage in biocatalytic processes, such as bioconversion, bioremediation, and biosensors obtainment, are presented.

Immobilized laccase: an effective biocatalyst for industrial dye degradation from wastewater

Environmental concerns due to the release of industrial wastewater contaminated with dyes are becoming more and more intense with the increasing industrialization. Decolorization of industrial effluents has become the top priority due to the continuous demand for color-free discharge into the receiving water bodies. Different dye removal techniques have been developed, among which biodegradation by laccase enzyme is competitive. Laccase, as a green catalyst, has a high catalytic activity, generates less toxic by-products, and has been extensively researched in the field of remediation of dyes. However, laccase's significant catalytic activity could only be achieved after an effective immobilization step. Immobilization helps strengthen and stabilize the protein structure of laccase, thus enhancing its functional properties. Additionally, the reusability of immobilized laccase makes it an attractive alternative to traditional dye degradation technologies and in the realistic applications of water treatment, compared with free laccase. This review has elucidated different methods and the carriers used to immobilize laccase. Furthermore, the role of immobilized laccase in dye remediation and the prospects have been discussed.

Utilization of laccase immobilized CdO nanoparticles in synthesis of industrially potent organics and their molecular docking studies

In the present study, Tricholoma giganteum AGHP laccase was immobilized on amino-functionalized cadmium oxide nanoparticles (CdO NPs) which was carried out by glutaraldehyde. The synthesized CdO NPs were characterized by using transmission electron microscopy (TEM), Energy dispersive X-ray analysis (EDXA) and X-ray diffraction (XRD) analysis which reflected the NPs had an average size of 35 nm with hexagonal and irregular shapes. Fourier transform infra-red (FTIR) study of laccase with amino-functionalized CdO (lac-CdO) NPs confirmed the crosslinking of laccase with CdO NPs. With immobilized laccase, a shift in pH (5.5) and temperature (35 ℃) optima was observed, when compared to free laccase (pH 4.5, 30 ℃). Lac-CdO NPs displayed 1.15 times higher stability (90 ± 0.47%) than free laccase (78 ± 0.69%) at optimum pH of 5.5. Immobilized laccase showed 1.19-fold improvement in thermal stability and 2.25-fold increment in half-life after 3 h of incubation at 50 ℃ as compared to free laccase. Recycling capability study demonstrated that lac-CdO NPs were able to retain 85 ± 0.68% of relative activity at the end of 20th 2,2-azinobis-3-ethylbenzthiozoline-6-sulfonic acid (ABTS) oxidation cycle. In addition, lac-CdO NPs showed remarkable reusability in catalysing various organic synthesis reactions even after several cycle of catalysis. Furthermore, the interactions of organic synthesis reactions and interacted residues were observed by assessing the molecular docking poses of T. giganteum laccase with substrates. The obtained results would be advantageous to develop a biocatalyst over a chemical catalyst for effective synthesis of potent organics having industrial importance.

Recent Developments in the Immobilization of Laccase on Carbonaceous Supports for Environmental Applications - A Critical Review

Τhe ligninolytic enzyme laccase has proved its potential for environmental applications. However, there is no documented industrial application of free laccase due to low stability, poor reusability, and high costs. Immobilization has been considered as a powerful technique to enhance laccase's industrial potential. In this technology, appropriate support selection for laccase immobilization is a crucial step since the support could broadly affect the properties of the resulting catalyst system. Through the last decades, a large variety of inorganic, organic, and composite materials have been used in laccase immobilization. Among them, carbon-based materials have been explored as a support candidate for immobilization, due to their properties such as high porosity, high surface area, the existence of functional groups, and their highly aromatic structure. Carbon-based materials have also been used in culture media as supports, sources of nutrients, and inducers, for laccase production. This study aims to review the recent trends in laccase production, immobilization techniques, and essential support properties for enzyme immobilization. More specifically, this review analyzes and presents the significant benefits of carbon-based materials for their key role in laccase production and immobilization.

Site directed confinement of laccases in a porous scaffold towards robustness and selectivity

We immobilized a fungal laccase with only two spatially close lysines available for functionalization into macrocellular Si(HIPE) monoliths for the purpose of continuous flow catalysis. Immobilization (30-45 % protein immobilization yields) was obtained using a covalent bond forming reaction between the enzyme and low glutaraldehyde (0.625 % (w/w)) functionalized foams. Testing primarily HBT-mediated RB5 dye decolorization in continuous flow reactors, we show that the activity of the heterogeneous catalyst is comparable to its homogeneous counterpart. More, its operational activity remains as high as 60 % after twelve consecutive decolorization cycles as well as after one-year storage, performances remarkable for such a material. We further immobilized two variants of the laccase containing a unique lysine: one located in the vicinity of the substrate oxidation site (K157) and one at the opposite side of this oxidation site (K71) to study the effect of the proximity of the Si(HIPE) surface on enzyme activity. Comparing activities on different substrates for monoliths with differentially oriented catalysts, we show a twofold discrimination for ABTS relative to ascorbate. This study provides ground for the development of neo-functionalized materials that beyond allowing stability and reusability will become synergic partners in the catalytic process.

DNA-copper hybrid nanoflowers as efficient laccase mimics for colorimetric detection of phenolic compounds in paper microfluidic devices

Laccases are important multicopper oxidases that are involved in many biotechnological processes; however, they suffer from poor stability as well as high cost for production/purification. Herein, we found that DNA-copper hybrid nanoflowers, prepared via simple self-assembly of DNA and copper ions, exhibit an intrinsic laccase-mimicking activity, which is significantly higher than that of control materials formed in the absence of DNA. Upon testing all four nucleobases, we found that hybrid nanoflowers composed of guanine-rich ssDNA and copper phosphate (GNFs) showed the highest catalytic activity, presumably due to the affirmative coordination between guanine and copper ions. At the same mass concentration, GNFs had similar K_m but 3.5-fold higher V_max compared with those of free laccase, and furthermore, they exhibited significantly-enhanced stability in ranges of pH, temperature, ionic strength, and incubation period of time. Based on these advantageous features, GNFs were applied to paper microfluidic devices for colorimetric detection of diverse phenolic compounds such as dopamine, catechol, and hydroquinone. In the presence of phenolic compounds, GNFs catalyzed their oxidation to react with 4-aminoantipyrine for producing a colored adduct, which was conveniently quantified from an image acquired using a conventional smartphone with ImageJ software. Besides, GNFs successfully catalyzed the decolorization of neutral red dye much faster than free laccase. This work will facilitate the development of nanoflower-type nanozymes for a wide range of applications in biosensors and bioremediation.

Harnessing the biocatalytic attributes and applied perspectives of nanoengineered laccases-A review

In the recent past, numerous new types of nanostructured carriers, as support matrices, have been engineered to advance the traditional enzyme immobilization strategies. The current research aimed to develop a robust enzyme-based biocatalytic platform and its effective deployment in the industrial biotechnology sectors at large and catalysis area, in particular, as low-cost biocatalytic systems. Suitable coordination between the target enzyme molecules and surface pendent multifunctional entities of nanostructured carriers has led an effective and significant contribution in myriad novel industrial, biotechnological, and biomedical applications. As compared to the immobilization on planar two-dimensional (2-D) surface, the unique physicochemical, structural and functional attributes of nano-engineered matrices, such as high surface-to-volume ratio, surface area, robust chemical and mechanical stability, surface pendant functional groups, outstanding optical, thermal, and electrical characteristics, resulted in the concentration of the immobilized entity being substantially higher, which is highly requisite from applied bio-catalysis perspective. Besides inherited features, nanostructured materials-based enzyme immobilization aided additional features, such as (1) ease in the preparation or green synthesis route, (2) no or minimal use of surfactants and harsh reagents, (3) homogeneous and well-defined core-shell nanostructures with thick enzyme shell, and (4) nano-size can be conveniently tailored within utility limits, as compared to the conventional enzyme immobilization. Moreover, the growing catalytic needs can be fulfilled by multi-enzymes co-immobilization on these nanostructured materials-based support matrices. This review spotlights the unique structural and functional attributes of several nanostructured materials, including carbon nanotubes, graphene, and its derivate constructs, nanoparticles, nanoflowers, and metal-organic frameworks as robust matrices for laccase immobilization. The later half of the review focuses on the applied perspective of immobilized laccases for the degradation of emergent contaminants, biosensing cues, and lignin deconstruction and high-value products.

Immobilization of the Highly Active UDP-Glucose Pyrophosphorylase From Thermocrispum agreste Provides a Highly Efficient Biocatalyst for the Production of UDP-Glucose

Biocatalysis that produces economically interesting compounds can be carried out by using free enzymes or microbial cells. However, often the cell metabolism does not allow the overproduction or secretion of activated sugars and thus downstream processing of these sugars is complicated. Here enzyme immobilization comes into focus in order to stabilize the enzyme as well as to make the overall process economically feasible. Besides a robust immobilization method, a highly active and stable enzyme is needed to efficiently produce the product of choice. Herein, we report on the identification, gene expression, biochemical characterization as well as immobilization of the uridine-5′-diphosphate-glucose (UDP-glucose) pyrophosphorylase originating from the thermostable soil actinobacterium Thermocrispum agreste DSM 44070 (TaGalU). The enzyme immobilization was performed on organically modified mesostructured cellular foams (MCF) via epoxy and amino group to provide a stable and active biocatalyst. The soluble and highly active TaGalU revealed a V_max of 1698 U mg^–1 (uridine-5′-triphosphate, UTP) and a K_m of 0.15 mM (UTP). The optimum reaction temperature was determined to be 50°C. TaGalU was stable at this temperature for up to 30 min with a maximum loss of activity of 65%. Interestingly, immobilized TaGalU was stable at 50°C for at least 120 min without a significant loss of activity, which makes this enzyme an interesting biocatalyst for the production of UDP-glucose.

Exploiting the potential of metal and solvent tolerant laccase from Tricholoma giganteum AGDR1 for the removal of pesticides

Laccase from previously reported hardwood degrading fungus, Tricholoma giganteum AGDR1, was isolated, identified at molecular level, biochemically characterized and also utilized for pesticide degradation. Laccase gene is comprised of 3752 bp, which encompassed 742-bp of 5' flanking upstream sequence with 12 introns and 12 exons. Mature enzyme possesses 391 amino acids and signal peptide, which is determined to be monomeric protein with an apparent molecular weight of 41 kDa and 6.45 pI. Higher optimal activities were observed at 45 °C and pH 3.0 and surprisingly, it exhibited more than 20% of relative activity at pH 1.5. Purified laccase was tolerant to 100 mM of metals (i.e. Se, Pb, Cu, Cr and Cd), organic solvents (ethyl acetate, methanol, ethanol and acetone) and potent inhibitors (hydroxylamine, thiourea, NaF and Na-azide) as compared to reported laccases. It was able to degrade 29%, 7% and 72% of chlorpyrifos, profenofos and thiophanate methyl within 15 h, respectively. Molecular docking analysis revealed that higher binding efficacy of these pesticides is observed with H83, H320, A95, V384, and P366 which are presented near to the catalytic site. Based on the results, T. giganteum AGDR1 laccase can be applied for the potential remediation and industrial applications under harsh conditions.

Biosorption Potential of Phanerochaete chrysosporium for Arsenic, Cadmium, and Chromium Removal from Aqueous Solutions

Efficient degradation of hazardous contaminants from contaminated water is the major challenge for researchers, wherein heavy metals are the prominent contaminants. Consequently, the assessment of multimetal removal is necessary using efficient biosorbant. In this work, the capability of Phanerochaete chrysosporium is evaluated for the individual and simultaneous removal of heavy metals. Individual and simultaneous removal of As, Cd, and Cr is optimized using response surface methodology based on the central composite design by changing the variables, i.e., pH, fungal biomass, and metal concentration. Optimization of the individual metal removal study reveals that fungus effectively absorbs As (29.95 mg L-1), Cd (18.1 mg L-1), and Cr (26.34 mg L-1) at 6.1, 5.64, and 4.15 of pH, respectively. Similarly, As (14.18 mg L-1), Cd (4.53 mg L-1), and Cr (9.28 mg L-1) are absorbed by fungal hyphae simultaneously within 1 h. Changes in the morphology of fungal hyphae are detected in metal absorbed samples as compared to the control hyphae. Interaction of metal-absorbed fungal hyphae is analyzed using FTIR spectroscopy, revealing that the proteins, carbohydrates, and fatty acids present in the fungal cell are interacted with metals. The model white rot fungi used in the present study can be applied efficiently for the multimetal removal in effluent treatment plants.