Study of Cell Behaviors on Anodized TiO2 Nanotube Arrays with Coexisting Multi-Size Diameters

Effect of size and crystalline phase of TiO2 nanotubes on cell behaviors: A high throughput study using gradient TiO2 nanotubes

The research of TiO2 nanotubes (TNTs) in the field of biomedicine has been increasingly active. However, given the diversity of the nanoscale dimension and controversial reports, our understanding of the structure-property relationships of TNTs is not yet complete. In this paper, gradient TNTs with a wide diameter range of 20-350 nm were achieved by bipolar electrochemistry and utilized for a thorough high-throughput study of the effect of nanotube dimension and crystalline phase on protein adsorption and cell behaviors. Results indicated that protein adsorption escalated with nanotube dimension whereas cell proliferation and differentiation are preferred on small diameter (<70 nm) nanotubes. Large diameter anatase nanotubes had higher adsorption of serum proteins than as-prepared ones. But only as-prepared small diameter nanotubes presented slightly higher cell proliferation than corresponding annealed nanotubes whereas there was no discernible difference between as-prepared and annealed nanotubes on cell differentiation for the entire gradient. Those findings replenish previous research about how cell responses to TNTs with a wide diameter range and provide scientific guidance for the optimal design of biomedical materials.

Enhanced osteogenic differentiation of human mesenchymal stem cells on Ti surfaces with electrochemical nanopattern formation

Titanium (Ti) and its alloys are mainly used for dental and orthopedic applications due to their excellent biocompatibility and mechanical properties. However, their intrinsic bioinertness often quotes as a common complaint for biomedical applications. Herein, we produced nanopattern Ti surfaces with 10 nm nanopores in 120 nm dimples by electrochemical nanopattern formation (ENF), and evaluated the osteogenic differentiation of human mesenchymal stem cells (hMSCs) on the nanopattern Ti surfaces. The ENF surfaces were obtained by removing the TiO₂ nanotube (NT) layers prepared by an anodization process. To determine the in vitro effects of the ENF surface, cell proliferation assay, alkaline phosphatase activity assay, alizarin red staining, western blotting, and immunocytochemistry were performed. Atomic force microscopy and scanning electron microscopy analysis show that the ENF surface has an ultrafine surface roughness with highly aligned nanoporous morphology. hMSCs on ENF surfaces exhibit increased proliferation and enhanced osteogenic differentiation as compared to the ordered TiO₂ nanotubular and compact TiO₂ surfaces. Surface modification with the ENF process is a promising technique for fabricating osteointegrative implant materials with a highly bioactive, rigid and purified nano surfaces.

High-Throughput Screening of Rat Mesenchymal Stem Cell Behavior on Gradient TiO2 Nanotubes

The dimension of TiO₂ nanotubes (TNTs) ranges from several nanometers to hundreds of nanometers. This variety raises the difficulty of screening suitable nanotube dimension for biomedical applications. Herein, we report the use of a simple one-step bipolar anodization method for fabrication of TNT gradients with diameter range from 30 to 100 nm. The gradient TNTs were successfully applied for high-throughput screening of TNT size effect on cell responses, including cell adhesion, proliferation, and differentiation. Results reveal that no significant difference in adherent cell number could be found within the range of 30-87 nm in both the presence and absence of serum proteins. On the contrary, large nanotubes (with outer diameter >87 nm) profoundly reduce cell adhesion in both the presence and absence of serum proteins, indicating TNT size could affect cell adhesion directly without the adsorbed proteins. The size effect on cell behavior becomes prominent with time that cell proliferation and differentiation decrease with increasing nanotube size. This size effect can be comprehended by protein adsorption and the formation of focal adhesion. Another two sample applications of gradient TNTs demonstrate gradient TNTs are promising for high-throughput screening.

Nanostructured Graphene Surfaces Promote Different Stages of Bone Cell Differentiation

Nanostructured graphene films were used as platforms for the differentiation of Saos-2 cells into bone-like cells. The films were grown using the plasma-enhanced chemical vapor deposition method, which allowed the production of both vertically and horizontally aligned carbon nanowalls (CNWs). Modifications of the technique allowed control of the density of the CNWs and their orientation after the transfer process. The influence of two different topographies on cell attachment, proliferation, and differentiation was investigated. First, the transferred graphene surfaces were shown to be noncytotoxic and were able to support cell adhesion and growth for over 7 days. Second, early cell differentiation (identified by cellular alkaline phosphatase release) was found to be enhanced on the horizontally aligned CNW surfaces, whereas mineralization (identified by cellular calcium production), a later stage of bone cell differentiation, was stimulated by the presence of the vertical CNWs on the surfaces. These results show that the graphene coatings, grown using the presented method, are biocompatible. And their topographies have an impact on cell behavior, which can be useful in tissue engineering applications.

The Biocompatibility of Dental Graded Nano-Glass-Zirconia Material After Aging

ᅟ: A graded nano-glass/zirconia (G/Z) system has been developed via the infiltration of nano-glass into a nano-zirconia surface, which is advantageous for robust core-veneer bonds. The aging issue is a key for yttrium-stabilized tetragonal zirconia polycrystals (Y-TZPs), and therefore, it is necessary to evaluate the influence of aging degradation on the biocompatibility of G/Z systems before their possible clinical application. Herein, such biocompatibility testing was performed with human gingival fibroblasts (HGFs) seeded onto unaged/aged G/Z and Y-TZP for 2-72 h. Assessments included an oral mucous membrane irritation test in conjunction with analyses of cell viability, cell adhesion, and oxidative stress responses. Significant metabolic decreases in aged G/Z- and Y-TZP-treated cells were observed at 72 h. G/Z did not elicit any significant differences in cell viability compared with Y-TZP over 72 h both before and after aging. The oxidative stress data for the aged G/Z- and Y-TZP-treated cells showed a significant increase at 72 h. The G/Z specimens did not elicit any significant differences in ROS production compared with Y-TZP over 72 h both before and after aging. The cell adhesion rates of both G/Z and Y-TZP increased significantly after aging. The cell adhesion rates of G/Z and Y-TZP were not significantly different before and after aging. According to the oral mucous membrane irritation test, scores for macroscopic and microscopic observations for both the aged G/Z and unaged G/Z sides were 0, demonstrating no consequent irritation.

CONCLUSIONS

The excellent biocompatibility of G/Z indicates that it has potential for future clinical applications.

Fast Growth of Highly Ordered TiO2 Nanotube Arrays on Si Substrate under High-Field Anodization

ABSTRACT

Highly ordered TiO₂ nanotube arrays (NTAs) on Si substrate possess broad applications due to its high surface-to-volume ratio and novel functionalities, however, there are still some challenges on facile synthesis. Here, we report a simple and cost-effective high-field (90-180 V) anodization method to grow highly ordered TiO₂ NTAs on Si substrate, and investigate the effect of anodization time, voltage, and fluoride content on the formation of TiO₂ NTAs. The current density-time curves, recorded during anodization processes, can be used to determine the optimum anodization time. It is found that the growth rate of TiO₂ NTAs is improved significantly under high field, which is nearly 8 times faster than that under low fields (40-60 V). The length and growth rate of the nanotubes are further increased with the increase of fluoride content in the electrolyte.

GRAPHICAL ABSTRACT

Highly ordered TiO₂ nanotube arrays (NTAs) on Si substrate have been fabricated by high-field anodization method. A high voltage (90-180 V) leads to a high growth rate of TiO₂ NTAs (35-47 nm s^-1), which is nearly 8 times faster than the growth rate under low fields (40-60 V). Furthermore, the current density-time curves recorded during the anodization provide a facial method to determine the optimal anodization parameters, leading to an easy obtaining of the desired nanotubes.