Self-Decoration of PtNi Alloy Nanoparticles on Multiwalled Carbon Nanotubes for Highly Efficient Methanol Electro-Oxidation

Confining N-Doped Carbon Dots into PtNi Aerogels Skeleton for Robust Electrocatalytic Methanol Oxidation and Oxygen Reduction

Noble metallic aerogels with the self-supported hierarchical structure and remarkable activity are promising for methanol fuel cells, but are limited by the severe poisoning and degradation of active sites during electrocatalysis. Herein, the highly stable electrocatalyst of N-doped carbon dots-PtNi (NCDs-PtNi) aerogels is proposed by confining NCDs with alloyed PtNi for methanol oxidation and oxygen reduction reactions. Comprehensive electrocatalytic measurements and theoretical investigations suggest the improvement in structure stability and regulation in electronic structure for better electrocatalytic durability when confining NCDs with PtNi aerogels. Notably, the NCDs-PtNi aerogels perform 12-fold higher activity than that of Pt/C and maintain 52% of their initial activity after 5000 cycles toward acidic methanol oxidation. The enhanced stability and activity of NCDs-PtNi aerogels are also evident for oxygen reduction reactions in different electrolytes. These results highlight the effectiveness of stabilizing metallic aerogels with NCDs, offering a feasible pathway to develop robust electrocatalysts for fuel cells.

Design strategies of Pt-based electrocatalysts and tolerance strategies in fuel cells: a review

As highly efficient conversion devices, proton-exchange-membrane fuel cells (PEMFCs) can directly convert chemical energy to electrical energy with high efficiencies and lower or even zero emissions compared to combustion engines. However, the practical applications of PEMFCs have been seriously hindered by the intermediates (especially CO) poisoning of anodic Pt catalysts. Hence, how to improve the CO tolerance of the needed Pt catalysts and reveal their anti-CO poisoning mechanism are the key points to developing novel anti-toxic Pt-based electrocatalysts. To date, two main strategies have received increasing attention in improving the CO tolerance of Pt-based electrocatalysts, including alloying Pt with a second element and fabricating composites with geometry and interface engineering. Herein, we will first discuss the latest developments of Pt-based alloys and their anti-CO poisoning mechanism. Subsequently, a detailed description of Pt-based composites with enhanced CO tolerance by utilizing the synergistic effect between Pt and carriers is introduced. Finally, a brief perspective and new insights on the design of Pt-based electrocatalysts to inhibit CO poisoning in PEMFCs are also presented.

Mixed-Dimensional Pt-Ni Alloy Polyhedral Nanochains as Bifunctional Electrocatalysts for Direct Methanol Fuel Cells

Pt nanocatalysts play a critical role in direct methanol fuel cells (DMFCs) due to their appropriate adsorption/desorption energy, yet suffer from an unbalanced relationship between size-dependent activity and stability. Herein, mixed-dimensional Pt-Ni alloy polyhedral nanochains (Pt-Ni PNCs) with an ordered assembly of a nanopolyhedra-nanowire-nanopolyhedra architecture are fabricated as bifunctional electrocatalysts for DMFCs, effectively alleviating the size effect. The Pt-Ni PNCs exhibit 7.23 times higher mass activity for the anodic methanol oxidation reaction (MOR) than that of commercial Pt/C. In situ Fourier transform infrared spectroscopy and CO stripping measurements demonstrate the prominent stability of the Pt-Ni PNCs to resist CO poisoning. For the cathodic oxygen reduction reaction (ORR), a positive half-wave potential exceeding Pt/C is achieved by the Pt-Ni PNCs, and it can be well maintained for 10 000 cycles with negligible activity decay. The designed nanostructure can alleviate the agglomeration and dissolution problems of 0D small-sized Pt-Ni alloy nanocrystals and enrich surface atom steps and active facets of 1D chain-like nanostructures. This work provides a proposed strategy to improve the catalytic performance of Pt-based nanocatalysts by constructing novel interfacial relationships in mixed dimensions to alleviate the imbalance between catalytic activity and catalytic stability caused by size effects.

Sputtering onto liquids: a critical review

Sputter deposition of atoms onto liquid substrates aims at producing colloidal dispersions of small monodisperse ultrapure nanoparticles (NPs). Since sputtering onto liquids combines the advantages of the physical vapor deposition technique and classical colloidal synthesis, the review contains chapters explaining the basics of (magnetron) sputter deposition and the formation of NPs in solution. This review article covers more than 132 papers published on this topic from 1996 to September 2021 and aims at providing a critical analysis of most of the reported data; we will address the influence of the sputtering parameters (sputter power, current, voltage, sputter time, working gas pressure, and the type of sputtering plasma) and host liquid properties (composition, temperature, viscosity, and surface tension) on the NP formation as well as a detailed overview of the properties and applications of the produced NPs.

Control of nanoparticles synthesized via vacuum sputter deposition onto liquids: a review

Sputter deposition onto a low volatile liquid matrix is a recently developed green synthesis method for metal/metal oxide nanoparticles (NPs). In this review, we introduce the synthesis method and highlight its unique features emerging from the combination of the sputter deposition and the ability of the liquid matrix to regulate particle growth. Then, manipulating the synthesis parameters to control the particle size, composition, morphology, and crystal structure of NPs is presented. Subsequently, we evaluate the key experimental factors governing the particle characteristics and the formation of monometallic and alloy NPs to provide overall directions and insights into the preparation of NPs with desired properties. Following that, the current understanding of the growth and formation mechanism of sputtered particles in liquid media, in particular, ionic liquids and liquid polymers, during and after sputtering is emphasized. Finally, we discuss the challenges that remain and share our perspectives on the future prospects of the synthesis method and the obtained NPs.

Gas Phase Synthesis of Multi-Element Nanoparticles

The advantages of gas-phase synthesis of nanoparticles in terms of size control and flexibility in choice of materials is well known. There is increasing interest in synthesizing multi-element nanoparticles in order to optimize their performance in specific applications, and here, the flexibility of material choice is a key advantage. Mixtures of almost any solid materials can be manufactured and in the case of core-shell particles, there is independent control over core size and shell thickness. This review presents different methods of producing multi-element nanoparticles, including the use of multiple targets, alloy targets and in-line deposition methods to coat pre-formed cores. It also discusses the factors that produce alloy, core-shell or Janus morphologies and what is possible or not to synthesize. Some applications of multi-element nanoparticles in medicine will be described.

Recent advances in phosphorus containing noble metal electrocatalysts for direct liquid fuel cells

Direct liquid fuel cells (DLFCs) are considered as satisfactory alternatives to traditional fossil fuels owing to their unique advantages, e.g. environmental friendliness and easy storage. Noble metal catalysts are widely used to improve the efficiency of DLFCs. However, the high cost, low utilization and poor stability of noble metals restricted their practical applications. Therefore, it is of great significance to explore cost-effective electrocatalysts and further improve their electrocatalytic performance. Reducing the content of noble metals by adding low-priced phosphorus (P) has been considered as an effective strategy, which is able to enhance their electrocatalytic activity and anti-poisoning ability through effectively changing the electronic density of active sites. In the past few years, tremendous P containing catalysts have been synthesized and utilized in DLFCs. In this review, we summarize the fundamentals of electrochemical reactions and present recent progress in P containing noble metal catalysts for DLFCs, including the discussion of their shape, composition and the relationship between P and active sites. Finally, the challenges and some potential directions in this field are pointed out.

Pt distribution-controlled Ni–Pt nanocrystals via an alcohol reduction technique for the oxygen reduction reaction

The catalytic performance and durability of Ni–Pt alloy nanoparticles synthesized using an alcohol reduction technique were enhanced by controlling the metallic Pt distribution.

Single-Walled Carbon Nanotube Supported PtNi Nanoparticles (PtNi@SWCNT) Catalyzed Oxidation of Benzyl Alcohols to the Benzaldehyde Derivatives in Oxygen Atmosphere

This study reports a developed process which is a general and facile method for the oxidation of benzyl alcohol (BnOH) compounds to the benzaldehyde (BA) derivatives, under mild conditions. The oxidation of BnOH species catalyzed by PtNi@SWCNT in toluene (3 ml) at 80 °C under a continuous stream of O₂. Single wall carbon nanotube supported PtNi (PtNi@SWCNT) nanoparticles were synthesized using a single-step modified reduction process. The characterization of PtNi@SWCNT nanocatalyst was performed by transmission electron microscope (TEM), X-ray diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), and elemental analysis by ICP-OES. A variety of BnOH compounds were oxidized by the PtNi@SWCNT catalyst and all the expected oxidation products were obtained in high efficiency in 2 hours of reaction time. TLC was used to monitoring the reaction progress, and the products were identified by ¹H/¹³C-NMR analysis.

Morris M, G. Lyons M, Gun’ko YK. One Dimensional AuAg Nanostructures as Anodic Catalysts in the Ethylene Glycol Oxidation

Direct alcohol fuel cells are highly promising as efficient power sources for various mobile and portable applications. However, for the further advancement of fuel cell technology it is necessary to develop new, cost-effective Pt-free electrocatalysts that could provide efficient alcohol oxidation and also resist cross-over poisoning. Here, we report new electrocatalytic materials for ethylene glycol oxidation, which are based on AuAg linear nanostructures. We demonstrate a low temperature tunable synthesis that enables the preparation of one dimensional (1D) AuAg nanostructures ranging from nanowires to a new nano-necklace-like structure. Using a two-step method, we showed that, by aging the initial reaction mixture at various temperatures, we produced ultrathin AuAg nanowires with a diameter of 9.2 ± 2 and 3.8 ± 1.6 nm, respectively. These nanowires exhibited a high catalytic performance for the electro-oxidation of ethylene glycol with remarkable poisoning resistance. These results highlight the benefit of 1D metal alloy-based nanocatalysts for fuel cell applications and are expected to make an important contribution to the further development of fuel cell technology.

Enhanced CO catalytic oxidation over an Au–Pt alloy supported on TiO2 nanotubes: investigation of the hydroxyl and Au/Pt ratio influences

The schematic illustrates the catalytic mechanism and reaction pathways of Au–Pt/TiO2 SNT catalysts with enhanced catalytic activity for CO oxidation.

Synthesis of highly fluorescent Cu/Au bimetallic nanoclusters and their application in a temperature sensor and fluorescent probe for chromium(iii) ions

Bimetallic nanoclusters (BNCs) have attracted great attention due to their cooperative electronic, optical, and catalytic properties. Here, a novel one-step synthetic method is presented to prepare highly fluorescent bimetallic copper–gold nanoclusters (Cu/Au BNCs) in ambient conditions by using glutathione (GSH) as both the reducing agent and the protective layer preventing the aggregation of the as-formed NCs. The resultant Cu/Au BNCs are uniformly dispersed, with an average diameter of 1.5 nm, and it exhibits emission at 450 nm with excitation at 380 nm. Interestingly, the fluorescence signal of the Cu/Au BNCs is reversibly responsive to the environmental temperature, and it shows good sensitivity in the range of 20–70 °C (F = −23.96T + 3149.2 (R = 0.94)). Furthermore, it was found that the fluorescence of Cu/Au BNCs was quenched selectively by Cr³⁺, and a detection method was further developed with detection linear range from 50 nM to 1 mM (F = −174.85[Cr³⁺] + 1686.69 (R = 0.98)) and high sensitivity (LOD = 10 nM, S/N = 3).

The Cu/Au BNCs have been successfully synthesized as a temperature sensor and it successful detection Cr³⁺.

Au/Cu Bimetallic Nanoparticles via Double-Target Sputtering onto a Liquid Polymer

Alloy nanoparticles (NPs) of a bimetal system, Au/Cu, that form intermetallic compounds in a bulk state have been successfully produced using a double-target sputtering technique onto a low-cost and biocompatible liquid polymer (polyethylene glycol, PEG). The formation of an Au/Cu solid solution alloy in individual NPs was revealed by scanning transmission electron microscopy-energy-dispersive X-ray elemental mapping analysis. Altering the sputter currents for Au and Cu targets resulted in a tailored NP composition, but the particle sizes did not significantly vary. We found similar structures, sizes, and optical properties of Au/Cu NPs obtained by double-head sputtering on carbon-coated transmission electron microscopy grids or PEG and by Au/Cu alloy target sputtering. Random alloy formation occurred in matrix sputtering using double-target heads. This method is advantageous for manipulating the alloy composition through highly independent control of sputter parameters for each metal target.

Synergistic Effects in CNTs-PdAu/Pt Trimetallic Nanoparticles with High Electrocatalytic Activity and Stability

We present a straightforward physical approach for synthesizing multiwalled carbon nanotubes (CNTs)-PdAu/Pt trimetallic nanoparticles (NPs), which allows predesign and control of the metal compositional ratio by simply adjusting the sputtering targets and conditions. The small-sized CNTs-PdAu/Pt NPs (~3 nm, Pd/Au/Pt ratio of 3:1:2) act as nanocatalysts for the methanol oxidation reaction (MOR), showing excellent performance with electrocatalytic peak current of 4.4 A mgPt -1 and high stability over 7000 s. The electrocatalytic activity and stability of the PdAu/Pt trimetallic NPs are much superior to those of the corresponding Pd/Pt and Au/Pt bimetallic NPs, as well as a commercial Pt/C catalyst. Systematic investigation of the microscopic, crystalline, and electronic structure of the PdAu/Pt NPs reveals alloying and charge redistribution in the PdAu/Pt NPs, which are responsible for the promotion of the electrocatalytic performance.

Nitrogen-Doped Carbon Nanotube-Supported Pd Catalyst for Improved Electrocatalytic Performance toward Ethanol Electrooxidation

In this study, hydrothermal carbonization (HTC) was applied for surface functionalization of carbon nanotubes (CNTs) in the presence of glucose and urea. The HTC process allowed the deposition of thin nitrogen-doped carbon layers on the surface of the CNTs. By controlling the ratio of glucose to urea, nitrogen contents of up to 1.7 wt% were achieved. The nitrogen-doped carbon nanotube-supported Pd catalysts exhibited superior electrochemical activity for ethanol oxidation relative to the pristine CNTs. Importantly, a 1.5-fold increase in the specific activity was observed for the Pd/HTC-N1.67%CNTs relative to the catalyst without nitrogen doping (Pd/HTC-CNTs). Further experiments indicated that the introduction of nitrogen species on the surface of the CNTs improved the Pd(0) loading and increased the binding energy.