In Situ Coupling Strategy for Anchoring Monodisperse Co9S8 Nanoparticles on S and N Dual-Doped Graphene as a Bifunctional Electrocatalyst for Rechargeable Zn-Air Battery

Tailoring the d-band electronic structure of deficient LaMn0.3Co0.7O3-δ perovskite nanofibers for boosting oxygen electrocatalysis in Zn-Air batteries

The development and design of efficient bifunctional electrocatalysts towards oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are crucial for rechargeable Zinc-air batteries (ZABs). Optimizing the d-band structure of active metal center in perovskite oxides is an effective method to enhance ORR/OER activity by accelerating the rate-determining step. Herein, we report a deficient method to optimize the d-band structure of Co ions in LaMn0.3Co0.7O3-δ (LMCO-2) perovskite nanofibers, which regulates the mutual effect between B-site Co ions and reactive oxygen intermediates. It is proved by experiment and theoretical calculation that the d-band center (Md) of transition metal ions in LMCO-2 is moved up and the electron filling number of eg orbital in B site is 1.01, thus leading to the reduction of Gibbs free energy required for ORR rate-determining step (OH*→H2O*) to 0.22 eV and promoting reaction proceeds. In this manner, LMCO-2 showed good bifunctional oxygen electrocatalytic activity, with a half-wave potential of 0.71 V vs. RHE. Furthermore, the high specific capacity of 811.54 mAh g-1 and power density of 326.56 mW cm-2 were obtained by using LMCO-2 as the cathode catalyst for ZABs. This study proved the feasibility of d-band structure regulation to enhance the electrocatalytic activity of perovskite oxides.

Construction of Carbon Nanofiber-Wrapped SnO2 Hollow Nanospheres as Flexible Integrated Anode for Half/Full Li-Ion Batteries

SnO2 is deemed a potential candidate for high energy density (1494 mAh g-1) anode materials for Li-ion batteries (LIBs). However, its severe volume variation and low intrinsic electrical conductivity result in poor long-term stability and reversibility, limiting the further development of such materials. Therefore, we propose a novel strategy, that is, to prepare SnO2 hollow nanospheres (SnO2-HNPs) by a template method, and then introduce these SnO2-HNPs into one-dimensional (1D) carbon nanofibers (CNFs) uniformly via electrospinning technology. Such a sugar gourd-like construction effectively addresses the limitations of traditional SnO2 during the charging and discharging processes of LIBs. As a result, the optimized product (denoted SnO2-HNP/CNF), a binder-free integrated electrode for half and full LIBs, displays superior electrochemical performance as an anode material, including high reversible capacity (~735.1 mAh g-1 for half LIBs and ~455.3 mAh g-1 at 0.1 A g-1 for full LIBs) and favorable long-term cycling stability. This work confirms that sugar gourd-like SnO2-HNP/CNF flexible integrated electrodes prepared with this novel strategy can effectively improve battery performance, providing infinite possibilities for the design and development of flexible wearable battery equipment.

Mesoporous Surface-Sulfurized Fe-Co3O4 Nanosheets Integrated with N/S Co-Doped Graphene as a Robust Bifunctional Electrocatalyst for Oxygen Evolution and Reduction Reactions

Playing a significant role in electrochemical energy conversion and storage systems, heteroatom-doped transition metal oxides are key materials for oxygen-involving reactions. Herein, mesoporous surface-sulfurized Fe-Co₃O₄ nanosheets integrated with N/S co-doped graphene (Fe-Co₃O₄-S/NSG) were designed as composite bifunctional electrocatalysts for the oxygen evolution reaction (OER) and the oxygen reduction reaction (ORR). Compared with the Co₃O₄-S/NSG catalyst, it exhibited superior activity in the alkaline electrolytes by delivering an OER overpotential of 289 mV at 10 mA cm^-2 and an ORR half-wave potential of 0.77 V vs. RHE. Additionally, Fe-Co₃O₄-S/NSG kept stable at 4.2 mA cm^-2 for 12 h without significant attenuation to render robust durability. This work not only demonstrates the satisfactory effect of the transition-metal cationic modification represented by iron doping on the electrocatalytic performance of Co₃O₄, but it also provides a new insight on the design of OER/ORR bifunctional electrocatalysts for efficient energy conversion.

Heteroatom Codoped Graphene: The Importance of Nitrogen

Although graphene has exceptional properties, they are not enough to solve the extensive list of pressing world problems. The substitutional doping of graphene using heteroatoms is one of the preferred methods to adjust the physicochemical properties of graphene. Much effort has been made to dope graphene using a single dopant. However, in recent years, substantial efforts have been made to dope graphene using two or more dopants. This review summarizes all the hard work done to synthesize, characterize, and develop new technologies using codoped, tridoped, and quaternary doped graphene. First, I discuss a simple question that has a complicated answer: When can an atom be considered a dopant? Then, I briefly discuss the single atom doped graphene as a starting point for this review's primary objective: codoped or dual-doped graphene. I extend the discussion to include tridoped and quaternary doped graphene. I review most of the systems that have been synthesized or studied theoretically and the areas in which they have been used to develop new technologies. Finally, I discuss the challenges and prospects that will shape the future of this fascinating field. It will be shown that most of the graphene systems that have been reported involve the use of nitrogen, and much effort is needed to develop codoped graphene systems that do not rely on the stabilizing effects of nitrogen. I expect that this review will contribute to introducing more researchers to this fascinating field and enlarge the list of codoped graphene systems that have been synthesized.

Construction of three-dimensional cobalt sulfide/multi-heteroatom co-doped porous carbon as an efficient trifunctional electrocatalyst

Exploring cost-effective non-precious metal electrocatalysts is vital for the large-scale application of clean energy conversion devices (i.e., fuel cells, metal-air batteries and water electrolysers). Herein, we present the construction of a three-dimensional cobalt sulfide/multi-heteroatom co-doped carbon composite as a trifunctional electrocatalyst for the oxygen reduction reaction (ORR), oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) through one-step sulfidation of zeolitic-imidazolate frameworks (ZIFs) using sulfur powder as a sulfur source. By virtue of the distinct periodic metal-nitrogen coordination structure and the abundant micropores within the ZIF precursor, sub-10 nm Co₉S₈ nanoparticles (NPs) are homogenously anchored on a Co, S and N multi-heteroatom co-doped carbon framework with a large specific surface area that exposes sufficient reactive sites for these electrocatalytic reactions. The optimized Co₉S₈/CoNSC exhibits outstanding ORR, OER and HER performance, comparable or even superior to those of commercial Pt/C and RuO₂. The small Co₉S₈ NPs and Co-N_x species embedded in the carbon matrix cooperatively catalyze the OER and ORR, while the HER catalysis is mainly contributed by Co₉S₈ NPs. Furthermore, the Co₉S₈/CoNSC shows outstanding anti-poisoning capability towards sulfur species during ORR catalysis with no obvious activity degradation observed in 0.1 M KOH containing 50 μM SO₃^2- species, significantly outperforming commercial Pt/C. The assembled rechargeable Zn-air battery using the Co₉S₈/CoNSC as a cathode shows a high power density (150 mW cm^-2) and the assembled water electrolyzer only requires 1.585 V at a current density of 10 mA cm^-2 when using this material as an anode and a cathode. This work provides an effective strategy to design and synthesize efficient, durable and anti-poisoning cobalt chalcogenide-based trifunctional electrocatalysts for the large-scale application of clean energy conversion devices.

Enhancing the bifunctional activity of CoSe2 nanocubes by surface decoration of CeO2 for advanced zinc-air batteries

The coupling of oxygen evolution and reduction reactions (OER and ORR) plays a key role in rechargeable Zn-air batteries (ZABs). However, both OER and ORR still suffer from sluggish kinetics, even when using the mainstream precious metal-based catalysts. Herein, oxygen vacancies-rich CeO₂ decorated CoSe₂ nanocubes are proposed as a novel air electrode to drive OER and ORR for ZABs. The resultant CeO₂ coupled CoSe₂ nanocubes (CeO₂@CoSe₂-NCs) catalyst exhibits a significantly enhanced bifunctional activity relative to the pristine CoSe₂-NCs and the pristine CeO₂. Moreover, an assembled ZABs using this CeO₂@CoSe₂-NCs electrode delivers a high output power density of 153 mW cm^-2 and a long-life stability over 400 cycles, superior to the benchmark Pt/C-IrO₂ electrode. Theoretical calculations reveal that the electronic interaction and oxygen vacancies in CeO₂@CoSe₂-NCs contribute to efficient oxygen electrocatalysis. This protocol provides a promising approach of constructing oxygen vacancies in hybrid catalysts for energy conversion and storage devices.

Cobalt nanoparticles embedded into nitrogen-doped graphene with abundant macropores as a bifunctional electrocatalyst for rechargeable zinc-air batteries

Nitrogen doped carbon materials containing transition metal nanoparticles have attracted much attention as bifunctional oxygen electrocatalysts. In this paper, the template etching method is used to obtain the nitrogen-doped graphene with abundant macropores embedded with cobalt nanoparticles (Co@N-C). The prepared Co@NC-800 catalyst has a half-wave potential (E 1/2= 0.835V) close to Pt/C and good stability in excess of Pt/C for oxygen reduction reaction (ORR). At the same time, the catalyst has good oxygen evolution reaction (OER) performance. In addition, zinc-air batteries (ZABs) based on the Co@NC-800 catalyst show good cycle stability of up to 200000 s and high power density of 73.5 mW cm -2 . The synergistic effect of the integrated component between nitrogen-doped graphene and cobalt nanoparticles as well as the macroporous structure endow Co@NC-800 with abundant exposed active sites and mass/electron transfer capacity, thus leading to the high electrocatalytic activity. This work shows potential for practical applications in electrochemistry.

Metal-Organic-Framework-Derived Cobalt nanoparticles encapsulated in Nitrogen-Doped carbon nanotubes on Ni foam integrated Electrode: Highly electroactive and durable catalysts for overall water splitting

The rational design and use of highly efficient, economic, and environmentally friendly bifunctional catalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is important for developing methods for overall water splitting. Here, we report a facile self-catalyzed growth strategy for in situ encapsulation of Co nanoparticles with N-doped carbon nanotubes (NCNTs) on Ni foam (NF) (Co/NCNTs-NF-T; T represents the pyrolysis temperature). The zeolite imidazole framework (ZIF-67) precursor, which was used as a structure inducer, provided a Co source for catalyzing melamine graphitization and promoted in situ growth of NCNTs on the NF surface. This encapsulation structure and self-supporting system enhance the HER and OER activities of Co/NCNTs-NF-900 (low overpotentials of 66.98 mV for the HER and 240.32 mV for the OER at 10 mA cm^-2). This binder-free catalyst for overall water splitting, i.e., Co/NCNTs-NF-900, has excellent catalytic activity and durability. This method offers a facile and green strategy for designing highly active bifunctional electrocatalysts and paves the way for the future development of energy conversion/storage systems.

Mesoporous N-P Codoped Carbon Nanosheets as Superior Cathodic Catalysts of Neutral Metal-Air Batteries

Development of high-efficiency oxygen reduction reaction (ORR) catalysts under neutral conditions has made little research progress. In this work, we synthesized a three-dimensional porous N/P codoped carbon nanosheet composites (CNP@PNS) by high-temperature thermal treatment of dicyandiamide, starch, and triphenylphosphine and subsequent porous structure-making treatment using the NaCl molten salt template. In the neutral solution, the electrocatalytic performance of the CNP@PNS-4 catalyst exhibits an onset potential of 0.98 V (vs reversible hydrogen electrode) and a half-wave potential of 0.91 V for ORR, which greatly surpasses commercial Pt/C (40%). Three kinds of neutral metal-air batteries (Zn-air, Al-air, and Fe-air) using the prepared samples as cathodic catalysts were constructed, corresponding to the maximum power density of 120.2, 78.3, and 18.9 mW·cm^-2, respectively. Also, they reveal outstanding discharge stability under different current densities. The density functional theory calculation depicts the reduction of the free energy of the determining step and subsequent decline of the overpotential for ORR.

Recent Advances on MOF Derivatives for Non-Noble Metal Oxygen Electrocatalysts in Zinc-Air Batteries

Oxygen electrocatalysts are of great importance for the air electrode in zinc-air batteries (ZABs). Owing to the high specific surface area, controllable pore size and unsaturated metal active sites, metal-organic frameworks (MOFs) derivatives have been widely studied as oxygen electrocatalysts in ZABs. To date, many strategies have been developed to generate efficient oxygen electrocatalysts from MOFs for improving the performance of ZABs. In this review, the latest progress of the MOF-derived non-noble metal-oxygen electrocatalysts in ZABs is reviewed. The performance of these MOF-derived catalysts toward oxygen reduction, and oxygen evolution reactions is discussed based on the categories of metal-free carbon materials, single-atom catalysts, metal cluster/carbon composites and metal compound/carbon composites. Moreover, we provide a comprehensive overview on the design strategies of various MOF-derived non-noble metal-oxygen electrocatalysts and their structure-performance relationship. Finally, the challenges and perspectives are provided for further advancing the MOF-derived oxygen electrocatalysts in ZABs.

Co-Doped Ni3N Nanosheets with Electron Redistribution as Bifunctional Electrocatalysts for Efficient Water Splitting

Preparation of high-activity and earth-abundant bifunctional catalysts for efficient electrochemical water splitting are crucial and challenging. Herein, Co-doped Ni₃N nanosheets loaded on nickel foam (Co-Ni₃N) were synthesized. The as-prepared Co-Ni₃N exhibits excellent catalytic activity toward both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) in alkaline media. Density functional theory (DFT) calculation reveals that Co-Ni₃N with redistribution of electrons not only can facilitate the HER kinetics but also can regulate intermediates adsorption energies for OER. Specifically, the Co-Ni₃N exhibits high efficiency and stable catalytic activity, with an overpotential of only 30 and 270 mV at a current density of 10 mA cm^-2 for the HER and OER in 1 M KOH, respectively. This work provides strong evidence to the merit of Co doping to improve the innate electrochemical performance in bifunctional catalysts, which might have a common impact in many similar metal-metal nitride electrocatalysts.

A facile one-pot synthesis of Co2P nanoparticle-encapsulated doped carbon nanotubes as bifunctional electrocatalysts for high-performance rechargeable Zn–air batteries

One-pot synthesis of Co₂P nanoparticles encapsulated into doped carbon nanotubes, which can be applied as ORR/OER bifunctional catalysts for Zn–air batteries.

Waste to wealth: spent catalyst as an efficient and stable bifunctional oxygen electrocatalyst for zinc–air batteries

The spent catalysts obtained from catalytic decomposition of methane are often considered as waste and typically subjected to energy intensive processes such as high-temperature combustion for recycling or chemical treatment for metal reclamation.

Exploiting a High-Performance "Double-Carbon" Structure Co9S8/GN Bifunctional Catalysts for Rechargeable Zn-Air Batteries

Rational synthesis of bifunctional electrocatalysts with high performance and strong durability is highly demanded rechargeable metal-air battery. In this work, ZIF-derived Co₉S₈/C coated with conductive graphene nanosheet (Co₉S₈/GN) was synthesized by a simple solvothermal method and formed a stable double-carbon structure. As expected, the prepared Co₉S₈/GN catalyst exhibits a high catalytic activity (ΔE: 0.88 V) and long-term durability toward both oxygen reduction reaction and oxygen evolution reaction (ORR and OER), which is even superior to the Pt/C + Ir/C mixture (0.91 V). In addition, the Zn-air battery with the Co₉S₈/GN catalyst showed higher power density (186 mW cm^-2) and more stable charge-discharge cycling performances (2000 cycles) than the Pt/C + Ir/C (118 mW cm^-2). Based on these analysis results, the favorable catalytic performance of ORR/OER should be illustrated by the following reasons: (i) large specific surface area and unique mesoporous structure, providing abundant active sites; (ii) good conductivity, accelerating the electrons transfer; and (iii) the unique stable "double-carbon" structures (metal-S-C-C), preventing the agglomeration of metal sulfide, building new quick transfer pathway, and forming the strong electron coupling ability and synergistic effect.

A Porous Nano-Micro-Composite as a High-Performance Bi-Functional Air Electrode with Remarkable Stability for Rechargeable Zinc-Air Batteries

The development of bi-functional electrocatalyst with high catalytic activity and stable performance for both oxygen evolution/reduction reactions (OER/ORR) in aqueous alkaline solution is key to realize practical application of zinc-air batteries (ZABs). In this study, we reported a new porous nano-micro-composite as a bi-functional electrocatalyst for ZABs, devised by the in situ growth of metal-organic framework (MOF) nanocrystals onto the micrometer-sized Ba0.5Sr0.5Co0.8Fe0.2O3 (BSCF) perovskite oxide. Upon carbonization, MOF was converted to porous nitrogen-doped carbon nanocages and ultrafine cobalt oxides and CoN4 nanoparticles dispersing inside the carbon nanocages, which further anchored on the surface of BSCF oxide. We homogeneously dispersed BSCF perovskite particles in the surfactant; subsequently, ZIF-67 nanocrystals were grown onto the BSCF particles. In this way, leaching of metallic or organic species in MOFs and the aggregation of BSCF were effectively suppressed, thus maximizing the number of active sites for improving OER. The BSCF in turn acted as catalyst to promote the graphitization of carbon during pyrolysis, as well as to optimize the transition metal-to-carbon ratio, thus enhancing the ORR catalytic activity. A ZAB fabricated from such air electrode showed outstanding performance with a potential gap of only 0.83 V at 5 mA cm-2 for OER/ORR. Notably, no obvious performance degradation was observed for the continuous charge-discharge operation for 1800 cycles over an extended period of 300 h.

Bifunctional Oxygen Electrocatalyst of Mesoporous Ni/NiO Nanosheets for Flexible Rechargeable Zn-Air Batteries

One approach to accelerate the stagnant kinetics of both the oxygen reduction and evolution reactions (ORR/OER) is to develop a rationally designed multiphase nanocomposite, where the functions arising from each of the constituent phases, their interfaces, and the overall structure are properly controlled. Herein, we successfully synthesized an oxygen electrocatalyst consisting of Ni nanoparticles purposely interpenetrated into mesoporous NiO nanosheets (porous Ni/NiO). Benefiting from the contributions of the Ni and NiO phases, the well-established pore channels for charge transport at the interface between the phases, and the enhanced conductivity due to oxygen-deficiency at the pore edges, the porous Ni/NiO nanosheets show a potential of 1.49 V (10 mA cm-2) for the OER and a half-wave potential of 0.76 V for the ORR, outperforming their noble metal counterparts. More significantly, a Zn-air battery employing the porous Ni/NiO nanosheets exhibits an initial charging-discharging voltage gap of 0.83 V (2 mA cm-2), specific capacity of 853 mAh g Zn -1 at 20 mA cm-2, and long-time cycling stability (120 h). In addition, the porous Ni/NiO-based solid-like Zn-air battery shows excellent electrochemical performance and flexibility, illustrating its great potential as a next-generation rechargeable power source for flexible electronics.

Nitrogen-Doped Graphene-Buffered Mn2 O3 Nanocomposite Anodes for Fast Charging and High Discharge Capacity Lithium-Ion Batteries

Mn₂ O₃ is a promising anode material for lithium-ion batteries (LIBs) because of its high theoretical capacity and low discharge potential. However, low electronic conductivity and capacity fading limits its practical application. In this work, Mn₂ O₃ with 1D nanowire geometry is synthesized in neutral aqueous solutions by a facile and effective hydrothermal strategy for the first time, and then Mn₂ O₃ nanoparticle and nitrogen-doped reduced graphene oxide (N-rGO) are composited with Mn₂ O₃ nanowires (Mn₂ O₃ -GNCs) to enhance its volume utilization and conductivity. When used as an anode material for LIBs, the Mn₂ O₃ -GNCs exhibit high reversible capacity (1350 mAh g^-1 ), stable cycling stability, and good rate capability. Surprisingly, the Mn₂ O₃ -GNC electrodes can also show fast charging capability; even after 200 cycles (charge: 10 A g^-1 ; discharge: 0.5 A g^-1 ), its discharge capacity can also keep at ≈500 mAh g^-1 . In addition, the Mn₂ O₃ -GNCs also have considerable full cell and supercapacitor performance. The excellent electrochemical performances can be ascribed to the N-rGO network structure and 1D nanowire structure, which can ensure fast ion and electron transportation.

Flexible Conductive Anodes Based on 3D Hierarchical Sn/NS-CNFs@rGO Network for Sodium-Ion Batteries

Metallic Sn has provoked tremendous progress as an anode material for sodium-ion batteries (SIBs). However, Sn anodes suffer from a dramatic capacity fading, owing to pulverization induced by drastic volume expansion during cycling. Herein, a flexible three-dimensional (3D) hierarchical conductive network electrode is designed by constructing Sn quantum dots (QDs) encapsulated in one-dimensional N,S co-doped carbon nanofibers (NS-CNFs) sheathed within two-dimensional (2D) reduced graphene oxide (rGO) scrolls. In this ingenious strategy, 1D NS-CNFs are regarded as building blocks to prevent the aggregation and pulverization of Sn QDs during sodiation/desodiation, 2D rGO acts as electrical roads and "bridges" among NS-CNFs to improve the conductivity of the electrode and enlarge the contact area with electrolyte. Because of the unique structural merits, the flexible 3D hierarchical conductive network was directly used as binder- and current collector-free anode for SIBs, exhibiting ultra-long cycling life (373 mAh g-1 after 5000 cycles at 1 A g-1), and excellent high-rate capability (189 mAh g-1 at 10 A g-1). This work provides a facile and efficient engineering method to construct 3D hierarchical conductive electrodes for other flexible energy storage devices.

Co/Co9S8 nanoparticles coupled with N,S-doped graphene-based mixed-dimensional heterostructures as bifunctional electrocatalysts for the overall oxygen electrode

A Co/Co₉S₈/rGO/MWCNT composite catalyst was designed and fabricated via a combined hydrothermal reaction with a calcination method for the ORR/OER.