Hollow Bio-derived Polymer Nanospheres with Ordered Mesopores for Sodium-Ion Battery

Toward Sustainable Polymer Materials for Rechargeable Batteries: Utilizing Natural Feedstocks and Recycling/Upcycling of Polymer Waste

The ever-increasing demand for rechargeable battery systems in the era of electric vehicles has spurred extensive research into developing polymeric components for batteries, such as separators, polymer electrolytes, and binders. However, current battery systems rely on expensive and nonrenewable resources, which potentially have a negative environmental impact. Therefore, polymer materials derived from natural resources have gained significant attention, primarily due to their cost-effective and environmentally sustainable features. Moreover, natural feedstocks often possess highly polar functional groups and high molecular weights, offering desirable electro-chemo-mechanical features when applied as battery materials. More recently, various recycling and upcycling strategies for polymeric battery components have also been proposed given the substantial waste generation from end-of-life batteries. Recycling polymeric materials includes an overall process of recovering the components from spent batteries followed by regeneration into new materials. Polymer upcycling into battery materials involves transforming daily-used plastic waste into high-value-added battery components. This review aims to give a state-of-the-art overview of contemporary methods to develop sustainable polymeric materials and recycling/upcycling strategies for various battery applications.

Multifunctional Lithium Phytate/Carbon Nanotube Double-Layer-Modified Separators for High-Performance Lithium-Sulfur Batteries

Li dendrite and the shuttle effect are the two primary hindrances to the commercial application of lithium-sulfur batteries (LSBs). Here, a multifunctional separator has been fabricated via successively coating carbon nanotubes (CNTs) and lithium phytate (LP) onto a commercial polypropylene (PP) separator to improve the performance of LSBs. The LP coating layer with abundant electronegative phosphate group as permselective ion sieve not only reduces the polysulfide shuttle but also facilitates uniform Li+ flux through the PP separator. And the highly conductive CNTs on the second layer act as a second collector to accelerate the reversible conversion of sulfide species. The synergistic effect of LP and CNTs further increases the electrolyte wettability and reaction kinetics of cells with a modified separator and suppresses the shuttle effect and growth of Li dendrite. Consequently, the LSBs present much enhanced rate performance and cyclic performance. It is expected that this study may generate an executable tactic for interface engineering of separator to accelerate the industrial application process of LSBs.

Hierarchical porous carbon materials for lithium storage: preparation, modification, and applications

Secondary battery as an efficient energy conversion device has been highly attractive for alleviating the energy crisis and environmental pollution. Hierarchical porous carbon (HPC) materials with multiple sizes pore channels are considered as promising materials for energy conversion and storage applications, due to their high specific surface area and excellent electrical conductivity. Although many reviews have reported on carbon materials for different fields, systematic summaries about HPC materials for lithium storage are still rare. In this review, we first summarize the main preparation methods of HPC materials, including hard template method, soft template method, and template-free method. The modification methods including porosity and morphology tuning, heteroatom doping, and multiphase composites are introduced systematically. Then, the recent advances in HPC materials on lithium storage are summarized. Finally, we outline the challenges and future perspectives for the application of HPC materials in lithium storage.

Molybdenum Oxynitride Atomic Nanoclusters Bonded in Nanosheets of N-Doped Carbon Hierarchical Microspheres for Efficient Sodium Storage

Transition metal nitrides have attracted considerable attention as great potential anode materials due to their excellent metallic conductivity and high theoretical specific capacity. However, their cycling performance is impeded by their instability caused by the reaction mechanism. Herein, we report the engineering and synthesis of a novel hybrid architecture composed of MoO_2.0N_0.5 atomic nanoclusters bonded in nanosheets of N-doped carbon hierarchical hollow microspheres (MoO_2.0N_0.5/NC) as an anode material for sodium-ion batteries. The facile self-templating strategy for the synthesis of MoO_2.0N_0.5/NC involves chemical polymerization and subsequent one-step calcination treatments. The design is beneficial to improve the electrochemical kinetics, buffer the volume variation of electrodes during cycling, and provide more interfacial active sites for sodium uptake. Due to these unique structural and compositional merits, these MoO_2.0N_0.5/NC exhibits excellent sodium storage performance in terms of superior rate capability and stable long cycle life. The work shows a feasible and effective way to design novel host candidates and solve the long-term cycling stability issues for sodium-ion batteries.

Interface and Charge Induced Molecular Self-assembly Strategy for the Synthesis of Reduced Graphene Oxide Coated with Mesoporous Platinum Sheets

The design of porous noble metal catalysts holds great promise in various electrocatalytic applications. However, it is still a challenge to improve the durability performance through constructing stable framework. Here, we develop an interface and charge induced strategy to synthesize large-sized continuous reduced graphene oxide@mesoporous platinum (denoted as rGO@mPt) sheets under kinetic control by molecular self-assembly design. Graphene oxide (GO) is a promising large-sized growth interface for platinum. Cationic surfactant dioctadecyldimethylammonium chloride bridges the negatively charged GO and platinum precursors, while creating interconnected mesopores. The successful synthesis of rGO@mPt sheets relies on proper kinetic control, which is achieved by controlling pH, temperature and the complexation of bromide ions. rGO@mPt sheets present strong crystallinity with a pure face-centered cubic Pt phase. Worm-like mesostructures with an average pore size of 2.2 nm exist throughout the sheets. rGO@mPt sheets possess both stable framework and abundant active sites, which markedly improve the durability on methanol oxidation reaction (MOR) while maintaining relatively good catalytic activity. Long-term stability test shows a slight loss of 1.2% activity after 250 cycles. Amperometric i-t curves reveal the mass current three times higher compared to commercial Pt/C at 3000 s. This article is protected by copyright. All rights reserved.

Diblock copolymers directing construction of hierarchically porous metal-organic frameworks for enhanced-performance supercapacitors

A rationally designed strategy is developed to synthesize hierarchically porous Fe-based metal-organic frameworks (P-Fe-MOF) via solution-based self-assembly of diblock copolymers. The well-chosen amphiphilic diblock copolymers (BCP) of polystyrene-block-poly(acrylic acid) (PS-b-PAA) exhibits outstanding tolerance capability of rigorous conditions (e.g. strong acidity or basicity, high temperature and pressure), steering the peripheral crystallization of Fe-based MOF by anchoring ferric ions with outer PAA block. Importantly, the introduction of BCP endows MOF materials with additional mesopores (∼40 nm) penetrating whole crystals, along with their inherent micropores and introduced macropores. The unique hierarchically porous architecture contributes to fast charge transport and electrolyte ion diffusion, and thus promotes their redox reaction kinetics processes. Accordingly, the resultant P-Fe-MOF material as a new electrode material for supercapacitors delivers the unprecedented highest specific capacitance up to 78.3 mAh g^-1 at a current density of 1 A g^-1, which is 9.8 times than that of Fe-based MOF/carbon nanotubes composite electrode reported previously. This study may inspire new design of porous metal coordination polymers and advanced electrode materials for energy storage and conversion field.

Advanced Anode Materials of Potassium Ion Batteries: from Zero Dimension to Three Dimensions

Potassium ion batteries (PIBs) with the prominent advantages of sufficient reserves and economical cost are attractive candidates of new rechargeable batteries for large-grid electrochemical energy storage systems (EESs). However, there are still some obstacles like large size of K⁺ to commercial PIBs applications. Therefore, rational structural design based on appropriate materials is essential to obtain practical PIBs anode with K⁺ accommodated and fast diffused. Nanostructural design has been considered as one of the effective strategies to solve these issues owing to unique physicochemical properties. Accordingly, quite a few recent anode materials with different dimensions in PIBs have been reported, mainly involving in carbon materials, metal-based chalcogenides (MCs), metal-based oxides (MOs), and alloying materials. Among these anodes, nanostructural carbon materials with shorter ionic transfer path are beneficial for decreasing the resistances of transportation. Besides, MCs, MOs, and alloying materials with nanostructures can effectively alleviate their stress changes. Herein, these materials are classified into 0D, 1D, 2D, and 3D. Particularly, the relationship between different dimensional structures and the corresponding electrochemical performances has been outlined. Meanwhile, some strategies are proposed to deal with the current disadvantages. Hope that the readers are enlightened from this review to carry out further experiments better.

General Construction of 2D Ordered Mesoporous Iron-Based Metal-Organic Nanomeshes

Nanomeshes with highly regular, permeable pores in plane, combining the exceptional porous architectures with intrinsic properties of 2D materials, have attracted increasing attention in recent years. Herein, a series of 2D ultrathin metal-organic nanomeshes with ordered mesopores is obtained by a self-assembly method, including metal phosphate and metal phosphonate. The resultant mesoporous ferric phytate nanomeshes feature unique 2D ultrathin monolayer morphologies (≈9 nm thickness), hexagonally ordered, permeable mesopores of ≈16 nm, as well as improved surface area and pore volume. Notably, the obtained ferric phytate nanomeshes can directly in situ convert into mesoporous sulfur-doped metal phosphonate nanomeshes by serving as an unprecedented reactive self-template. Furthermore, as advanced anode materials for Li-ion batteries, they deliver excellent capacity, good rate capability, and cycling performance, greatly exceeding the similar metal phosphate-based materials reported previously, resulting from their unique 2D ultrathin mesoporous structure. Therefore, the work will pave an avenue for constructing the other 2D ordered mesoporous materials, and thus offer new opportunities for them in diverse areas.

Free-Standing N-Doped Carbon Nanotube Films with Tunable Defects as a High Capacity Anode for Potassium-Ion Batteries

Potassium-ion batteries (KIBs) have aroused enormous interest for future energy storage technology. However, the current anodes for KIBs greatly suffer from the rapid capacity fading and inferior rate capability. Herein, a free-standing flexible anode, that is, nitrogen-doped carbon nanotube paper (NCTP), which is derived from the pyrolysis of organic polypyrrole materials, is demonstrated for high-performance potassium storage. The correlations between the material structure and electrochemical properties have been investigated by a series of material analysis and characterizations, as well as electrochemical tests. The research results show that the annealing temperature dramatically affects the N-doping content, the carbon defects, and the graphitization degree. Electrochemical tests indicate that the NCTP annealed at 700 °C displays the best performances with a high reversible capacity of 250.1 mA h g^-1 at 100 mA g^-1 and superior rate capability retaining 133 mA h g^-1 at 5 A g^-1. The excellent electrochemical properties are derived from a synergic contribution from the moderate N-doping, carbon defect, and high electronic conductivity of the materials. The facile pyrolysis strategy and the appealing performances involved in this work could provide some hints to manipulate high-performance anode materials of KIBs.

Pre-Polymerization Enables Controllable Synthesis of Nanosheet-Based Porphyrin Polymers towards High-Performance Li-Ion Batteries

The precise regulation of nucleation growth and assembly of polymers is still an intriguing goal but an enormous challenge. In this study, we proposed a pre-polymerization strategy to regulate the assembly and growth of polymers by facilely controlling the concentration of polymerization initiator, and thus obtained two kinds of different nanosheet-based porphyrin polymer materials using tetrakis-5,10,15,20-(4-aminophenyl) porphyrin (TAPP) as the precursor. Notably, due to the π-π stacking and doping of TAPP during the preparation process, the obtained PTAPP-nanocube material exhibits a high intrinsic bulk conductivity reaching 1.49×10^-4  S m^-1 . Profiting from the large π-conjugated structure of porphyrin units, closely stacked layer structure and excellent conductivity, the resultant porphyrin polymers, as electrode materials for lithium ion batteries, deliver high specific capacity (≈650 mAh g^-1 at the current density of 100 mA g^-1 ), excellent rate performance and long-cycle stability, which are among the best reports of porphyrin polymer-based electrode materials for lithium-ion batteries, to the best of our knowledge. Therefore, such a pre-polymerization approach would provide a new insight for the controllable synthesis of polymers towards custom-made architecture and function.

Constructing polymers towards ultrathin nanosheets with dual mesopores and intrinsic photoactivity

We developed ultrathin dual-mesoporous polymer nanosheets by combining co-assembly of different templates with in situ synthesis of functional polymers, which featured inherent smaller and template-directed larger mesopores (2.6 nm and 15 nm, respectively), ultrathin nanolayers (20 nm), high surface area (268 m2 g-1), intrinsic fluorescent properties and effective detectability for organophosphates.