Isotype Heterojunction-Boosted CO2 Photoreduction to CO

Enhanced Electron-Coupled Proton Transfer in Pt/Bi2MoO6 for Improved Photocatalytic CO2 Reduction

The slow rate of electron-coupled proton transfer currently limits the efficiency of photocatalytic carbon dioxide (CO2) reduction. To address this challenge, we utilize Pt-loaded Bi2MoO6 ultrathin nanosheets, prepared via photodeposition, to enhance the separation and transfer of photogenerated charges. This approach significantly improves electron-coupled proton transfer efficiency and boosts photocatalytic CO2 reduction performance. With 0.8% platinum loading, the CO and CH4 generation rates reach 60.23 and 130.2 μmol g-1 h-1, respectively, which are 3 times and 2.7 times higher than those of pure Bi2MoO6. The presence of Pt increases the electron density on the photocatalyst surface, facilitating more efficient proton coupling. CO is produced through *COOH protonation, while CH4 is formed via the HCOOH-HCHO-CH3OH-CH4 reaction pathway. This study underscores the critical role of electron-coupled proton transfer in enhancing photocatalytic performance and offers valuable insights for designing more effective CO2 reduction photocatalysts.

100% Conversion of CO2-CH4 with Non-Precious Co@ZnO Catalyst in Hot Water

The combination of solar energy and natural hydrothermal systems will innovate the chemistry of CO2 hydrogenation; however, the approach remains challenging due to the lack of robust and cost-effective catalytic system. Here, Zn which can be recycled with solar energy-induced approach was chosen as the reductant and Co as catalyst to achieve robust hydrothermal CO2 methanation. Nanosheets of honeycomb ZnO were grown in situ on the Co surface, resulting in a new motif (Co@ZnO catalyst) that inhibits Co deactivation through ZnO-assisted CoOx reduction. The stabilized Co and interaction between Co and ZnO functioned collaboratively toward the full conversion of CO2-CH4. In situ hydrothermal infrared spectroscopy confirmed the formation of formic acid as an intermediate, thereby avoiding CO formation and unwanted side reaction pathways. This study presents a straightforward one-step process for both highly efficient CO2 conversion and catalyst synthesis, paving the way for solar-driven CO2 methanation.

Photoirradiation-enhanced behavior via morphological manipulation of CoFe2O4/g-C3N4 heterojunction for supercapacitor and CO2 reduction

Regulating the morphology of graphitic carbon nitride (g-C3N4, CN) and constructing CoFe2O4/g-C3N4 (CFO/CN) heterojunctions were adopted in the photocatalytic energy storage and photocatalytic CO2 reduction (PCR). CFO/CNS had outstanding light response ability, while CFO/CNT possessed excellent charge transfer ability. Consequently, CFO/CNT electrode exhibited the highest specific capacitance without light, CFO/CNS electrode showed the most obvious photo-enhanced capacitance behavior with an increase by 21.05 % under light. This was ascribed to the generation and separation of photo-generated carriers, promoting oxidation/reduction reactions. And in PCR, the electron consumption rates of four CFO/CN heterojunctions were CFO/CNT > CFO/BCN > CFO/MCN > CFO/CNS. CFO/CNT presented the highest photocatalytic activity, attributing to the strong redox ability and photo-enhanced electron transfer. This strategy of utilizing CFO/CN heterojunctions to construct photo-enhanced supercapacitor electrodes and photocatalytic CO2 reduction catalysts provided new ideas for energy conversion and storage.

Activation of Bi2MoO6/Zn0.5Cd0.5S charge transfer through interface chemical bonds and surface defects for photothermal catalytic CO2 reduction

The photocatalytic reduction of CO2 to high-value fuels has been proposed as a solution to the energy crisis caused by the depletion of energy resources. Despite significant advancements in photocatalytic CO2 reduction catalyst development, there are still limitations such as poor CO2 adsorption/activation and low charge transfer efficiency. In this study, we employed a defect-induced heterojunction strategy to construct atomic-level interface Cd-O bonds and form Bi2MoO6/Zn0.5Cd0.5S heterojunctions. The sulfur vacancies (VS) formed in Bi2MoO6/Zn0.5Cd0.5S acted as activation sites for CO2 adsorption. While the interfacial stability provided by the Cd-O bonds served as an electron transfer channel that facilitated the movement of electrons from the interface to the catalytic site. The VS and Cd-O bonds simultaneously influence the distribution of charge, inducing the creation of an interface electric field that facilitates the upward displacement of the center of the d-band. This enhances the adsorption of reaction intermediates. The optimized Bi2MoO6/Zn0.5Cd0.5S heterostructure exhibited high selectivity and stability of photoelectrochemical properties for CO, generating 42.97 μmol⋅g-1⋅h-1 of CO, which was 16.65-fold higher than Zn0.5Cd0.5S under visible light drive. This research provides valuable insights for designing photocatalyst interfaces with improved CO2 adsorption conversion efficiency.

Co-In Bimetallic Hydroxide Nanosheet Arrays With Coexisting Hydroxyl and Metal Vacancies Anchored on Rod-Like MOF Template for Enhanced Photocatalytic CO2 Reduction

Layered double hydroxides (LDHs) can serves as catalysts for CO2 photocatalytic reduction (CO2PR). However, the conventionally synthesized LDHs undergo undesired aggregation, which results in an insufficient number of active sites and limits the desirable electron transfer required for CO2PR. The metal-organic framework (MOF) template-grown LDHs demonstrate excellent promise for exploiting the strengths of both MOFs and LDHs. Herein, the in situ growth of MIL-68(In)-NH2 MOF-templated Co-In bimetallic catalyst (CoIn-LDH/MOF) having an ultrathin nanosheet morphology on the preserved rod-like MOF template is demonstrated. Compared to the conventionally grown bimetallic LDH (CoIn-LDH), CoIn-LDH/MOF not only exposes more active sites but also possesses hydroxyl vacancies (VOH) and Co vacancies (VCo). Thus, CoIn-LDH/MOF performs a higher CO generation rate of 2320 µmol g-1 h-1 during CO2PR, demonstrating improved activity and selectivity than those in CoIn-LDH. Experiments coupled with calculations reveal that the CoIn-LDH/MOF-driven CO2PR follows the *COOH pathway. The lower energy barriers for the formation of *COOH and CO(g) can be attributed to the coexistence of VOH and VCo in CoIn-LDH/MOF, effectively promoting charge transfer and enhancing CO2PR performance. This study provides a new strategy to obtain high-performant LDH-based catalysts with improved morphology.

Atomically Precise Cu Nanoclusters: Recent Advances, Challenges, and Perspectives in Synthesis and Catalytic Applications

Atomically precise metal nanoclusters are an emerging type of nanomaterial which has diverse interfacial metal-ligand coordination motifs that can significantly affect their physicochemical properties and functionalities. Among that, Cu nanoclusters have been gaining continuous increasing research attentions, thanks to the low cost, diversified structures, and superior catalytic performance for various reactions. In this review, we first summarize the recent progress regarding the synthetic methods of atomically precise Cu nanoclusters and the coordination modes between Cu and several typical ligands and then discuss the catalytic applications of these Cu nanoclusters with some explicit examples to explain the atomical-level structure-performance relationship. Finally, the current challenges and future research perspectives with some critical thoughts are elaborated. We hope this review can not only provide a whole picture of the current advances regarding the synthesis and catalytic applications of atomically precise Cu nanoclusters, but also points out some future research visions in this rapidly booming field.

Electronic structure modulation via single atom interfacial engineering for selective atmospheric CO2 photoreduction

Single-atom iridium was interfacially engineered on CuFeS2 quantum dots (QDs) with highly efficient CO2 photoreduction performance. The electronic structure modulation yielded a remarkable CO yield rate of 32.5 μmol g-1 h-1 with 92.2% selectivity under atmospheric conditions. This work demonstrates the potential of single-atom interfacial engineering for advancing CO2 photoreduction.

Mechanistic insights into C-C coupling in electrocatalytic CO2 reduction reaction

The utilization of CO2 has become an emerging area of research in response to climate change and global warming. The electrochemical CO2 reduction reaction (CO2RR) holds significant promise as a technology to address this issue by converting CO2 molecules into various commercially valuable chemicals. While CO2RR to C1 hydrocarbons has achieved high activity and selectivity, the C-C coupling to produce higher hydrocarbons remains challenging due to low energy efficiency and the prevalent hydrogen evolution reaction (HER) on the same catalyst, leading to high hydrogenation rates. In this review, we aim to elucidate the fundamental challenges of C-C coupling and explore potential strategies to enhance the selectivity for higher hydrocarbon products. We discuss the mechanisms underlying the formation of C2 and C3 products, focusing on molecular catalysts that facilitate C-C coupling by positioning CO2 molecules in close proximity. Additionally, we provide a comprehensive overview of different approaches to improve higher hydrocarbon selectivity, along with future suggestions and recommendations for new researchers in the field. This review serves as a valuable resource for both academic researchers and industrial stakeholders aiming for the commercialization of CO2RR technologies.

Integration of Co Single Atoms and Ni Clusters on Defect-Rich ZrO2 for Strong Photothermal Coupling Boosts Photocatalytic CO2 Reduction

We report a solvothermal method for the synthesis of an oxygen vacancy-enriched ZrO2 photocatalyst with Co single atoms and Ni clusters immobilized on the surface. This catalyst presents superior performance for the reduction of CO2 in H2O vapor, with a CO yield reaching 663.84 μmol g-1 h-1 and a selectivity of 99.52%. The total solar-to-chemical energy conversion efficiency is up to 0.372‰, which is among the highest reported values. The success, on one hand, depends on the Co single atoms and Ni clusters for both extended spectrum absorption and serving as dual-active centers for CO2 reduction and H2O dissociation, respectively; on the other hand, this is attributed to the enhanced photoelectric and thermal effect induced by concentrated solar irradiation. We demonstrate that an intermediate impurity state is formed by the hybridization of the d-orbital of single-atom Co with the molecular orbital of H2O, enabling visible-light-driven excitation over the catalyst. In addition, Ni clusters play a crucial role in altering the adsorption configuration of CO2, with the localized surface plasmon resonance effect enhancing the activation and dissociation of CO2 induced by visible-near-infrared light. This study provides valuable insights into the synergistic effect of the dual cocatalyst toward both efficient photothermal coupling and surface redox reactions for solar CO2 reduction.

Ruthenium Single Atomic Sites Surrounding the Support Pit with Exceptional Photocatalytic Activity

Single-metal atomic sites and vacancies can accelerate the transfer of photogenerated electrons and enhance photocatalytic performance in photocatalysis. In this study, a series of nickel hydroxide nanoboards (Ni(OH)x NBs) with different loadings of single-atomic Ru sites (w-SA-Ru/Ni(OH)x) were synthesized via a photoreduction strategy. In such catalysts, single-atomic Ru sites are anchored to the vacancies surrounding the pits. Notably, the SA-Ru/Ni(OH)x with 0.60 wt % Ru loading (0.60-SA-Ru/Ni(OH)x) exhibits the highest catalytic performance (27.6 mmol g-1 h-1) during the photocatalytic reduction of CO2 (CO2RR). Either superfluous (0.64 wt %, 18.9 mmol g-1 h-1; 3.35 wt %, 9.4 mmol-1 h-1) or scarce (0.06 wt %, 15.8 mmol g-1 h-1; 0.29 wt %, 21.95 mmol g-1 h-1; 0.58 wt %, 23.4 mmol g-1 h-1) of Ru sites have negative effect on its catalytic properties. Density functional theory (DFT) calculations combined with experimental results revealed that CO2 can be adsorbed in the pits; single-atomic Ru sites can help with the conversion of as-adsorbed CO2 and lower the energy of *COOH formation accelerating the reaction; the excessive single-atomic Ru sites occupy vacancies that retard the completion of CO2RR.

Accelerating carrier separation to boost the photocatalytic CO2 reduction performance of ternary heterojunction Ag-Ti3C2Tx/ZnO catalysts

Developing low-cost and efficient photocatalyst/co-catalyst systems that promote CO2 reduction remains a challenge. In this work, Ag-Ti3C2Tx composites were made using a self-reduction technique, and unique Ag-Ti3C2Tx/ZnO ternary heterojunction structure photocatalysts were created using an electrostatic self-assembly process. The photocatalyst's close-contact heterogeneous interface increases photogenerated carrier migration efficiency. The combination of Ti3C2Tx and Ag improves the adsorption active sites and reaction centers for ZnO, making it a key site for CO2 adsorption and activation. The best photocatalysts had CO and CH4 reduction efficiencies of 11.985 and 0.768 μmol g-1 h-1, respectively. The CO2 conversion was 3.35 times better than that of pure ZnO, which demonstrated remarkable stability even after four cycle trials with no sacrificial agent. Furthermore, in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS) and valence band spectroscopy were utilized to propose the photocatalytic reaction mechanism and electron transfer channels of the Ag-Ti3C2Tx/ZnO system, confirming that CHO* and CO* are the important intermediates in the generation of CH4 and CO. This study introduces a novel method for the development of new and efficient photocatalysts and reveals that Ti3C2Tx MXene is a viable co-catalyst for applications.

Solvent-regulated self-assembled carbon nitride for photocatalytic reduction of U(VI) in water

Manufacturing high-performance and reusable materials from radioactive uranium-containing wastewater remains a significant challenge. Herein, a supramolecular self-assembly strategy was proposed, using melamine and cyanuric acid as precursors and using intermolecular hydrogen bond force to form carbon nitride (CN-D) in different solvents through a single thermal polymerization strategy. Supramolecular self-assembly method is a promising strategy to synthesize a novel carbon nitride with molecular regulatory properties. In addition, 98% of U(VI) in wastewater can be removed by using CN-D for 60 min under visible light. After five cycles of recycling, more than 95% of U(VI) can still be reduced, indicating that it has good recyclability and reusability. This study not only provides an efficient photocatalytic method of uranium reduction, but also provides a new method for self-assembly synthesis.

Construction of n-type homogeneous to improve interfacial carrier transfer for enhanced photoelectrocatalytic hydrolysis

Photoelectrocatalyzed hydrogen production plays an important role in the path to carbon neutrality. The construction of heterojunctions provides an ideal example of an oxygen precipitation reaction. In this work, the performance of the n-n type heterojunction CeBTC@FeBTC/NIF in the photoelectronically coupled catalytic oxygen evolution reaction (OER) reaction is presented. The efficient transfer of carriers between components enhances the catalytic activity. Besides, the construction of heterojunctions optimizes the energy level structure and increases the absorption of light, and the microstructure forms holes with a blackbody effect that also enhances light absorption. Consequently, CeBTC@FeBTC/NIF has excellent photoelectric coupling catalytic properties and requires an overpotential of only 300 mV to drive a current density of 100 mA cm-2 under illumination. More importantly, the n-n heterojunction was found to be effective in enhancing charge and photogenerated electron migration by examining the carrier density of each component and carrier diffusion at the interface.

Construction of bismuth oxide iodide (BiOI)/zinc titanium oxide (Zn2TiO4) p-n heterojunction nanofibers with abundant oxygen vacancies for improving photocatalytic carbon dioxide reduction

The conversion of carbon dioxide (CO2) into value-added syngas represents an effective approach for addressing both environmental issues and carbon neutrality issue. However, the slow charge dynamics and low CO2 affinity severely limit the photocatalytic CO2 reduction reaction. In this study, bismuth oxide iodide (BiOI)/zinc titanium oxide (Zn2TiO4) composite nanofibers were successfully prepared by immobilizing BiOI nanosheets on Zn2TiO4 electrospun nanofibers through a solvothermal reaction method. The results of photocatalytic research indicate that the BiOI/Zn2TiO4 composite nanofibers exhibit improved photocatalytic activity in CO2 reduction compared to pristine BiOI nanosheets and Zn2TiO4 nanofibers. The highest carbon monoxide (CO) release rate of BiOI/Zn2TiO4 nanofibers could reach 9.10 µmol‧g-1‧h-1, which is 18.6 times and 6.6 times higher than that of pristine BiOI nanosheets and Zn2TiO4 nanofibers, respectively. The enhanced photocatalytic activity can be credited to the formed BiOI/Zn2TiO4 p-n heterojunction, which can boost electron separation, reduce charge recombination at the interface, and promote the reaction process. The presence of oxygen vacancies in BiOI/Zn2TiO4 nanofibers can not only provide active site to facilitate the adsorption and activation of CO2 molecules, but also adjust the energy band structure of the catalyst to accelerate carriers transfer. After four cycles of testing, the CO release rate of BiOI/Zn2TiO4 nanofibers remains nearly constant, demonstrating its excellent stability. This work develops a feasible strategy to improve the efficiency of photoreduction of CO2 through energy band engineering and surface defect technology.

Strain-Induced Surface Interface Dual Polarization Constructs PML-Cu/Bi12O17Br2 High-Density Active Sites for CO2 Photoreduction

The insufficient active sites and slow interfacial charge transfer of photocatalysts restrict the efficiency of CO2 photoreduction. The synchronized modulation of the above key issues is demanding and challenging. Herein, strain-induced strategy is developed to construct the Bi-O-bonded interface in Cu porphyrin-based monoatomic layer (PML-Cu) and Bi12O17Br2 (BOB), which triggers the surface interface dual polarization of PML-Cu/BOB (PBOB). In this multi-step polarization, the built-in electric field formed between the interfaces induces the electron transfer from conduction band (CB) of BOB to CB of PML-Cu and suppresses its reverse migration. Moreover, the surface polarization of PML-Cu further promotes the electron converge in Cu atoms. The introduction of PML-Cu endows a high density of dispersed Cu active sites on the surface of PBOB, significantly promoting the adsorption and activation of CO2 and CO desorption. The conversion rate of CO2 photoreduction to CO for PBOB can reach 584.3 μmol g-1, which is 7.83 times higher than BOB and 20.01 times than PML-Cu. This work offers valuable insights into multi-step polarization regulation and active site design for catalysts.

Decade Milestone Advancement of Defect-Engineered g-C3N4 for Solar Catalytic Applications

Over the past decade, graphitic carbon nitride (g-C3N4) has emerged as a universal photocatalyst toward various sustainable carbo-neutral technologies. Despite solar applications discrepancy, g-C3N4 is still confronted with a general fatal issue of insufficient supply of thermodynamically active photocarriers due to its inferior solar harvesting ability and sluggish charge transfer dynamics. Fortunately, this could be significantly alleviated by the "all-in-one" defect engineering strategy, which enables a simultaneous amelioration of both textural uniqueness and intrinsic electronic band structures. To this end, we have summarized an unprecedently comprehensive discussion on defect controls including the vacancy/non-metallic dopant creation with optimized electronic band structure and electronic density, metallic doping with ultra-active coordinated environment (M-Nx, M-C2N2, M-O bonding), functional group grafting with optimized band structure, and promoted crystallinity with extended conjugation π system with weakened interlayered van der Waals interaction. Among them, the defect states induced by various defect types such as N vacancy, P/S/halogen dopants, and cyano group in boosting solar harvesting and accelerating photocarrier transfer have also been emphasized. More importantly, the shallow defect traps identified by femtosecond transient absorption spectra (fs-TAS) have also been highlighted. It is believed that this review would pave the way for future readers with a unique insight into a more precise defective g-C3N4 "customization", motivating more profound thinking and flourishing research outputs on g-C3N4-based photocatalysis.

Understanding Bridging Sites and Accelerating Quantum Efficiency for Photocatalytic CO2 Reduction

We report a novel double-shelled nanoboxes photocatalyst architecture with tailored interfaces that accelerate quantum efficiency for photocatalytic CO2 reduction reaction (CO2RR) via Mo-S bridging bonds sites in Sv-In2S3@2H-MoTe2. The X-ray absorption near-edge structure shows that the formation of Sv-In2S3@2H-MoTe2 adjusts the coordination environment via interface engineering and forms Mo-S polarized sites at the interface. The interfacial dynamics and catalytic behavior are clearly revealed by ultrafast femtosecond transient absorption, time-resolved, and in situ diffuse reflectance-Infrared Fourier transform spectroscopy. A tunable electronic structure through steric interaction of Mo-S bridging bonds induces a 1.7-fold enhancement in Sv-In2S3@2H-MoTe2(5) photogenerated carrier concentration relative to pristine Sv-In2S3. Benefiting from lower carrier transport activation energy, an internal quantum efficiency of 94.01% at 380 nm was used for photocatalytic CO2RR. This study proposes a new strategy to design photocatalyst through bridging sites to adjust the selectivity of photocatalytic CO2RR.

Amide Covalent Bonding Engineering in Heterojunction for Efficient Solar-Driven CO2 Reduction

Inefficient charge separation and slow interfacial reaction dynamics significantly hamper the efficiency of photocatalytic CO2 reduction. Herein, a facile EDC/NHS-assisted linking strategy was developed to enhance charge separation in heterojunction photocatalysts. Using this approach, we successfully synthesized amide-bonded carbon quantum dot-g-C3N4 (CQD-CN) heterojunction photocatalysts. The formation of amide covalent bonds between CN and CQDs in the CN-CQD facilitates efficient carrier migration, CO2 adsorption, and activation. Exploiting these advantages, the CN-CQD photocatalysts exhibit high selectivity with CO and CH4 evolution rates of 79.2 and 2.7 μmol g-1 h-1, respectively. These rates are about 1.7 and 3.6 times higher than those of CN@CQD and bulk CN, respectively. Importantly, the CN-CQD photocatalysts demonstrate exceptional stability, even after 12 h of continuous testing. The presence of the COOH* signal is identified as a crucial intermediate species in the conversion of CO2 to CO. This study presents a covalent bonding engineering strategy for developing high-performance heterojunction photocatalysts for efficient solar-driven reduction of CO2.

One-step photodeposition of spatially separated CuOx and MnOx dual cocatalysts on g-C3N4 for enhanced CO2 photoreduction

The rapid recombination of photogenerated carriers of photocatalysts greatly limits their actual application in CO2 conversion into valuable chemicals. Herein, dual CuOx and MnOx cocatalysts are decorated on g-C3N4 nanosheets via a one-step photodeposition strategy. Benefiting from the repulsion between Cu2+ and Mn2+ cations, a novel g-C3N4-based heterostructure loaded with spatially separated CuOx and MnOx nanoparticle dual cocatalysts has been successfully fabricated. Cu favors the trapping of electrons, while MnOx tends to collect holes. Moreover, the Cu2O/g-C3N4 p-n heterojunction also accelerates the charge separation. As a result, the photogenerated holes and electrons flow into and out of the photocatalyst, respectively, resulting in enhanced charge separation for achieving efficient CO2 photoreduction over CuOx/g-C3N4/MnOx. Accordingly, the optimized CuOx/g-C3N4/MnOx exhibits an improved CO production rate of 5.49 μmol g-1 h-1, which is 27.5 times higher than that of bare g-C3N4.

Electrochemical Carbon Dioxide Reduction to Ethylene: From Mechanistic Understanding to Catalyst Surface Engineering

Electrochemical carbon dioxide reduction reaction (CO2RR) provides a promising way to convert CO2 to chemicals. The multicarbon (C2+) products, especially ethylene, are of great interest due to their versatile industrial applications. However, selectively reducing CO2 to ethylene is still challenging as the additional energy required for the C-C coupling step results in large overpotential and many competing products. Nonetheless, mechanistic understanding of the key steps and preferred reaction pathways/conditions, as well as rational design of novel catalysts for ethylene production have been regarded as promising approaches to achieving the highly efficient and selective CO2RR. In this review, we first illustrate the key steps for CO2RR to ethylene (e.g., CO2 adsorption/activation, formation of *CO intermediate, C-C coupling step), offering mechanistic understanding of CO2RR conversion to ethylene. Then the alternative reaction pathways and conditions for the formation of ethylene and competitive products (C1 and other C2+ products) are investigated, guiding the further design and development of preferred conditions for ethylene generation. Engineering strategies of Cu-based catalysts for CO2RR-ethylene are further summarized, and the correlations of reaction mechanism/pathways, engineering strategies and selectivity are elaborated. Finally, major challenges and perspectives in the research area of CO2RR are proposed for future development and practical applications.

W18O49/MnWO4 heterojunction for highly efficient photocatalytic reduction of CO2 under full spectrum light

Solar-energy-driven CO₂ reduction for chemical reagents production, such as CH₃OH, CH₄ and CO, has tremendous potential for carbon neutrality in the energy industries. However, the low reduction efficiency limits its applicability. Herein, W₁₈O₄₉/MnWO₄ (WMn) heterojunctions were prepared via one-step in-situ solvothermal process. Through this method, W₁₈O₄₉ tightly combined with the surface of MnWO₄ nanofibers to form nanoflower heterojunction. It was found that under full spectrum light irradiation for 4 h, the yields of photoreduction of CO₂ to CO, CH₄ and CH₃OH by 3-1 WMn heterojunction were 61.74, 71.30 and 18.98 μmol/g, respectively, which were 2.4, 1.8 and 1.1 times that of pristine W₁₈O₄₉, and ca.20 times that of pristine MnWO₄ towards CO production. Furthermore, even in the air atmosphere, the WMn heterojunction still performed excellent photocatalytic performance. Systematic investigations demonstrated that the catalytic performance of WMn heterojunction was improved by superior light utilization and more efficient photo-generated carrier separation and migration as compared with W₁₈O₄₉ and MnWO₄. Meanwhile, the intermediate products of the photocatalytic CO₂ reduction process were also studied in detail by in-situ FTIR. Therefore, this study provides a new way for designing high efficiency of heterojunction for CO₂ reduction.

Selective CO2 Photoreduction to Acetate at Asymmetric Ternary Bridging Sites

Photoreduction of CO₂ is a promising strategy to synthesize value-added fuels or chemicals and realize carbon neutralization. Noncopper catalysts are seldom reported to generate C₂ products, and the selectivity over these catalysts is low. Here, we design rich-interface, heterostructured In₂O₃/InP (r-In₂O₃/InP) for highly competitive photocatalytic CO₂-to-CH₃COOH conversion with a productivity of 96.7 μmol g^-1 and selectivity > 96% along with water oxidation to O₂ in pure water (no sacrificial agent) under visible light irradiation. The hard X-ray absorption near-edge structure (XANES) shows that the formation of r-In₂O₃/InP with the isogenesis cation adjusts the coordination environment via interface engineering and forms O-In-P polarized sites at the interface. In situ FT-IR and Raman spectra identify the key intermediates of OCCO* for acetate production with high selectivity. Density functional theory (DFT) calculations reveal that r-In₂O₃/InP with rich O-In-P polarized sites promotes C-C coupling to form C₂ products because of the imbalanced adsorption energies of two carbon atoms. This work reports an interesting indium-based photocatalyst for selective CO₂ photoreduction to acetate under strict solution and irradiation conditions and provides significant insights into fabricating interfacial polarization sites to promote the process.

A Comprehensive Review on Graphitic Carbon Nitride for Carbon Dioxide Photoreduction

Inspired by natural photosynthesis, harnessing the wide range of natural solar energy and utilizing appropriate semiconductor-based catalysts to convert carbon dioxide into beneficial energy species, for example, CO, CH₄ , HCOOH, and CH₃ COH have been shown to be a sustainable and more environmentally friendly approach. Graphitic carbon nitride (g-C₃ N₄ ) has been regarded as a highly effective photocatalyst for the CO₂ reduction reaction, owing to its cost-effectiveness, high thermal and chemical stability, visible light absorption capability, and low toxicity. However, weaker electrical conductivity, fast recombination rate, smaller visible light absorption window, and reduced surface area make this catalytic material unsuitable for commercial photocatalytic applications. Therefore, certain procedures, including elemental doping, structural modulation, functional group adjustment of g-C₃ N₄ , the addition of metal complex motif, and others, may be used to improve its photocatalytic activity towards effective CO₂ reduction. This review has investigated the scientific community's perspectives on synthetic pathways and material optimization approaches used to increase the selectivity and efficiency of the g-C₃ N₄ -based hybrid structures, as well as their benefits and drawbacks on photocatalytic CO₂ reduction. Finally, the review concludes a comparative discussion and presents a promising picture of the future scope of the improvements.

Carbon Dots Mediated In Situ Confined Growth of Bi Clusters on g-C3 N4 Nanomeshes for Boosting Plasma-Assisted Photoreduction of CO2

Synthesis of high-efficiency, cost-effective, and stable photocatalysts has long been a priority for sustainable photocatalytic CO₂ reduction reactions (CRR), given its importance in achieving carbon neutrality goals under the new development philosophy. Fundamentally, the sluggish interface charge transportation and poor selectivity of products remain a challenge in the CRR progress. Herein, this work unveils a synergistic effect between high-density monodispersed Bi/carbon dots (CDs) and ultrathin graphite phase carbon nitride (g-C₃ N₄ ) nanomeshes for plasma-assisted photocatalytic CRR. The optimal g-C₃ N₄ /Bi/CDs heterojunction displays a high selectivity of 98% for CO production with a yield up to 22.7 µmol g^-1 without any sacrificial agent. The in situ confined growth of plasmonic Bi clusters favors the production of more hot carriers and improves the conductivity of g-C₃ N₄ . Meanwhile, a built-in electric field driving force modulates the directional injection photogenerated holes from plasmonic Bi clusters and g-C₃ N₄ photosensitive units to adjacent CDs reservoirs, thus promoting the rapid separation and oriented transfer in the CRR process. This work sheds light on the mechanism of plasma-assisted photocatalytic CRR and provides a pathway for designing highly efficient plasma-involved photocatalysts.

Interface engineering of p-p Z-scheme BiOBr/Bi12O17Br2 for sulfamethoxazole photocatalytic degradation

The Z-scheme heterojunction has received widespread attention due to it can effectively improve the photocatalytic activity of photocatalytic materials. In this paper, a p-p Z-scheme hererojunction composed of bismuth oxybromide and oxygen-rich bismuth oxybromide was synthesized via facile one-step solvothermal method. Based on the characterization results, we demonstrated that the BiOBr/B_i12O₁₇Br₂ Z-scheme heterojunction was synthesized by intimate interface contact between BiOBr and B_i12O₁₇Br₂ p-type semiconductors. This endowed the heterojunction composite with excellent photogenerated carrier transfer ability and photogenerated electron-hole separation performance compared with pure BiOBr and B_i12O₁₇Br₂ materials, which were proven by photoelectrochemical measurement, photoluminescence spectra. The maximum photocurrent of BiOBr/Bi₁₂O₁₇Br₂ (≈0.32 μA) is approximately 3 times that of the original BiOBr (≈0.08 μA ) when light is irradiated. In addition, the BiOBr/B_i12O₁₇Br₂ p-p Z-scheme composite photocatalyst had good photocatalytic activity for sulfamethoxazole, with ·O₂^- free radicals as the main active species. It could photodegrade 99% sulfamethoxazole under light irradiation at 365 nm, and its degradation rate was approximately 13 times that of BiOBr and 1.5 times that of B_i12O₁₇Br₂ materials. Notably, BiOBr/B_i12O₁₇Br₂ exhibited an excellent performance after 4 consecutive runs. Besides, the possible degradation pathway of sulfamethoxazole was proposed. This work has reference significance for the construction of p-p Z-scheme heterojunctions and the treatment of environmental contaminants.