Cross-Dehydrogenative Coupling Reactions Between P(O)–H and X–H (X = S, N, O, P) Bonds

Decavanadate-Catalyzed Oxidative Cross-Dehydrogenative Coupling: an Efficient and Sustainable Approach toward P(O)─S Bond Formation

A convenient green protocol has been developed for the cross-dehydrogenative coupling between thiols and P(O)-H compounds using decavanadate anion as the catalyst at room temperature under open-flask conditions. The reaction proceeds efficiently in water or ethanol without any assistance of heat, light, electricity, or unfriendly additives and tolerates a broad spectrum of functional groups, delivering the desired products in up to 95% yield. Importantly, the decavanadate catalyst can be easily recycled in gram-scale synthesis at least six times without a significant decline in reaction yield. Further, mechanistic investigations evidence the formation of tetravalent vanadium-hydroxo-species in the reaction process and reveal that the P(O)-S dehydrogenative coupling is enabled via a VV to VIV catalytic cycle.

Machine Learning and Quantum Calculation for Predicting Yield in Cu-Catalyzed P-H Reactions

The paper discussed the use of machine learning (ML) and quantum chemistry calculations to predict the transition state and yield of copper-catalyzed P-H insertion reactions. By analyzing a dataset of 120 experimental data points, the transition state was determined using density functional theory (DFT). ML algorithms were then applied to analyze 16 descriptors derived from the quantum chemical transition state to predict the product yield. Among the algorithms studied, the Support Vector Machine (SVM) achieved the highest prediction accuracy of 97%, with over 80% correlation in Leave-One-Out Cross-Validation (LOOCV). Sensitivity analysis was performed on each descriptor, and a comprehensive investigation of the reaction mechanism was conducted to better understand the transition state characteristics. Finally, the ML model was used to predict reaction plans for experimental design, demonstrating strong predictive performance in subsequent experimental validation.

Aryl fluorosulfates: powerful and versatile partners in cross-coupling reactions

Aryl fluorosulfates are versatile building blocks in organic synthesis and have gained increasing attention in SuFEx (Sulfur Fluoride Exchange) click chemistry. They are easily and conveniently prepared from phenols using sulfuryl fluoride SO₂F₂ as a low-cost sulfonyl fluoride provider. Recently, they served as less toxic and more atom economical alternatives to triflates in an impressive number of carbon-carbon and carbon-heteroatom cross-coupling reactions. In this review, we summarize the current advances and developments in applying aryl fluorosulfates as electrophilic partners in cross-coupling reactions.

Two Paths to Oxidative C-H Amination Under Basic Conditions: A Theoretical Case Study Reveals Hidden Opportunities Provided by Electron Upconversion

Traditionally, cross-dehydrogenative coupling (CDC) leads to C-N bond formation under basic and oxidative conditions and is proposed to proceed via a two-electron bond formation mediated by carbenium ions. However, the formation of such high-energy intermediates is only possible in the presence of strong oxidants, which may lead to undesired side reactions and poor functional group tolerance. In this work we explore if oxidation under basic conditions allows the formation of three-electron bonds (resulting in "upconverted" highly-reducing radical-anions). The benefit of this "upconversion" process is in the ability to use milder oxidants (e. g., O2 ) and to avoid high-energy intermediates. Comparison of the two- and three-electron pathways using quantum mechanical calculations reveals that not only does the absence of a strong oxidant shut down two-electron pathways in favor of a three-electron path but, paradoxically, weaker oxidants react faster with the upconverted reductants by avoiding the inverted Marcus region for electron transfer.

Oxidative cross-coupling of thiols for S-X (X = S, N, O, P, and C) bond formation: mechanistic aspects

This review focuses on the reactive intermediates (disulfides, sulfenyl halides, thiyl radicals, sulfenium cations, and metal-organosulfur species) and the mechanisms of the recently reported oxidative couplings of thiols. These intermediates are generated by chemical oxidants, transition metal catalysts, electrochemistry, and photochemistry. Chemical oxidant-mediated reactions involve radical, halogenated, or cationic intermediates, or disulfides. Transition metal-catalyzed mechanisms proposed various metal-organosulfur intermediates to elucidate the reactivity and selectivity of metal catalysts. In electro- and photooxidation, direct oxidation/reduction mechanisms of reactants at the electrode or indirect oxidation/reduction of reactants in the presence of redox catalysts have been reported. The following sections are based on the products, thiosulfonates (S-S bond), sulfenamides, sulfinamides, and sulfonamides (S-N bond), sulfinates (S-O bond), thiophosphine oxides and thiophosphates (S-P bond), and sulfides, sulfoxides, and sulfones (S-C bond) and discuss the reaction mechanisms and the above-mentioned key intermediates for product formation. The contents of this review will provide helpful information, guiding the choice of oxidative coupling conditions for the synthesis of various organosulfur compounds with high yields and selectivity.

Hydroxysulfonylation of alkenes: an update

The direct difunctionalization of inexpensive and widely available alkenes has been recognized as a strong and straightforward tool for the rapid fabrication of complex molecules and pharmaceutical targets by introducing two different functional groups on adjacent carbon atoms of common alkene moieties in a single operation. This synthetic strategy avoids the purification and isolation of the intermediates and thus makes synthetic schemes shorter, simpler and cleaner. In this family of reactions, the hydroxysulfonylation of alkenes has emerged as an increasingly promising strategy for the synthesis of β-hydroxysulfones, which are found in many biologically important molecules and widespread applications in organic synthesis. The objective of this review is to illustrate the advancements in the field of hydroxysulfonylation of alkenes with special emphasis on the mechanistic details of the reaction pathways.

The direct difunctionalization of alkenes recognized as a straightforward tool for the rapid fabrication of complex molecules and pharmaceutical targets by introducing two different functional groups on adjacent carbon atoms of common alkene moieties.

Vicinal halo-trifluoromethylation of alkenes

Both trifluoromethyl and halide groups are widely found in medicinally and pharmaceutically important compounds and, moreover, organohalides are commonly used as versatile intermediates in synthetic organic chemistry. Due to their prevalence and easy accessibility, alkene halo-trifluoromethylation provides a convenient way to install these valuable functionalities in complex targets. In this review, we summarize recent advances and achievements in this fast-growing research field. For clarity, the reactions were classified according to the type of halogen atom.

Recent progress in application of nanocatalysts for carbonylative Suzuki cross-coupling reactions

In the past few decades, cross-coupling of aryl halides and arylboronic acids in the presence of carbon monoxide (CO), also called carbonylative Suzuki coupling, to form two new carbon-carbon bonds in the production of synthetically and biologically important biaryl ketones, has been widely studied. Consequently, various catalytic systems have been extensively investigated in order to maximize the efficiency of this appealing area of biaryl ketone synthesis. As evidenced in the literature, nanometal-based systems are among the most powerful catalysts for this transformation as their large surface area to volume ratio and reactive morphologies allow faster reaction rates under milder CO pressure even at very low catalyst loadings. This review aims to provide an overview of the recent advances and achievements in the application of nano-sized metal catalysts for carbonylative Suzuki cross-coupling reactions, which may serve as an inspiration to researchers in their future work.

Recent trends in the direct oxyphosphorylation of C-C multiple bonds

Due to the wide importance of β-phosphorylated ketones as key building-blocks in the fabrication of various pharmaceutically active organophosphorus compounds, finding new and truly efficient methods for their preparation from simple, low-cost and ubiquitous feedstock materials within a single click is an interesting subject in organic synthesis. Recently, oxyfunctionalization of carbon-carbon multiple bonds has arisen as a straightforward and versatile tool for the synthesis of complex organic molecules from the simple and easily accessible alkenes/alkynes via a single operation. In this context, oxyphosphorylation of alkenes/alkynes with P(O)-H compounds has attracted considerable attention as a unique procedure for the construction of β-phosphorylated ketones. In this review, we outline the recent advances and developments in this fast-growing research field with particular emphasis on the mechanistic aspects of reaction.

I2-Catalyzed Oxidative Coupling of Ketone Oximes and Dialkyl/Diarylphosphine Oxides

A new protocol for the oxidative coupling of ketone oximes with dialkyl/diarylphosphine oxides to synthesize O-(dialkylphosphinyl)ketone oximes has been developed. Hydrogen peroxide is used as a green oxidizing agent, and molecular iodine is used as a nonmetal catalyst. The reaction has a high atom economy, with water as the only byproduct. O-(Dialkylphosphinyl)ketone oximes with 26 examples have been obtained with high yields. Furthermore, the product may be transformed into other molecules, i.e., by reduction.

Direct sulfonamidation of (hetero)aromatic C-H bonds with sulfonyl azides: a novel and efficient route to N-(hetero)aryl sulfonamides

N-Aryl sulfonamides belong to a highly important class of organosulfur compounds which are found in a number of FDA-approved drugs such as dofetilide, dronedarone, ibutilide, sotalol, sulfadiazine, sulfamethizole, vemurafenib, and many more. There is therefore continuing interest in the development of novel and convenient protocols for the preparation of these pharmaceutically important compounds. Recently, direct sulfonamidation of (hetero)aromatic C–H bonds with easily available sulfonyl azides has emerged as an attractive and powerful strategy to access N-(hetero)aryl sulfonamides where non-toxic nitrogen gas forms as the sole by-product. This review highlights recent advances and developments (2012–2020) in this fast growing research area with emphasis on the mechanistic features of the reactions.

N-Aryl sulfonamides belong to a highly important class of organosulfur compounds which are found in a number of FDA-approved drugs such as dofetilide, dronedarone, ibutilide, sotalol, sulfadiazine, sulfamethizole, vemurafenib, and many more.

Cross-dehydrogenative Coupling Reactions Between Formamidic C(sp2)-H and X-H (X = C, O, N) Bonds

In the last decade, the scientific community has witnessed explosive growth in research on the direct carbamoylation of C-H and X-H (X = N, O) bonds with formamides via cross-dehydrogenative coupling reactions. This novel approach is an effective means of preparing a variety of carboxamide, carbamate as well as urea derivatives, which are prevalent in medicinal chemistry and natural product synthesis. This review elaborates the most important advances and developments in the field, with an emphasis on the reaction patterns and mechanisms.

Direct Amination of Aromatic C-H Bonds with Free Amines

Aromatic amines belong to a highly important class of organic compounds which are found in various natural products, functional materials, and pharmaceutical agents. Their prevalence has sparked continuing interest in the development of highly efficient and environmentally benign synthetic strategies for the construction of these compounds. Cross-dehydrogenative coupling reactions between two unmodified C(X)-H bonds have recently emerged as a versatile and powerful strategy for the fabrication of new C(X)-C(X) bonds. In this context, several procedures have been reported for the synthesis of aromatic amines through the direct amination of aromatic C-H bonds with free amines. This review highlights recent advances and progress in this appealing research arena, with special emphasis on the mechanistic features of the reactions.

Recent Advances in the Application of Nanometal Catalysts for Glaser Coupling

:

Synthesis of symmetrical 1,3-diynes from terminal alkynes through an oxidative process is generally called Glaser coupling. The classic Glaser coupling is catalyzed by copper salts under an atmosphere of molecular oxygen as an oxidant. Over the past years, different metal catalysts and oxidants were successfully used in this atom economical C-C coupling reaction. Moreover, several procedures for the preparation of unsymmetrical 1,3-diynes by coupling two different alkyne substrates have been developed. In this review, we will highlight the usefulness of transition metal nanoparticles as efficient catalysts in homo- and hetero-coupling of alkynes by hoping that it will be beneficial to the development of novel and extremely efficient catalytic systems for this fast-growing and important reaction.

A phosphoryl radical-initiated Atherton–Todd-type reaction under open air

A phosphoryl radical-initiated Atherton–Todd-type reaction enables the phosphorylation of alcohols, phenols, and amines under mild reaction conditions.

N-Fluorobenzenesulfonimide: a useful and versatile reagent for the direct fluorination and amination of (hetero)aromatic C–H bonds

This review updates recent advances and developments in the direct fluorination and amination of (hetero)aromatic C–H bonds utilizing N-fluorobenzenesulfonimide, classified according to the type of catalyst.

This review updates recent advances and developments in the direct fluorination and amination of (hetero)aromatic C–H bonds utilizing N-fluorobenzenesulfonimide, classified according to the type of catalyst.

Practical Synthesis of Phosphinic Amides/Phosphoramidates through Catalytic Oxidative Coupling of Amines and P(O)-H Compounds

Herein, we report a highly efficient ZnI₂ -triggered oxidative cross-coupling reaction of P(O)-H compounds and amines. This operationally simple protocol provides unprecedented generic access to phosphinic amides/phosphoramidate derivatives in good yields and short reaction time. Besides, the reaction proceeds under mild conditions, which avoids the use of hazardous reagents, and is applicable to scale-up syntheses as well as late-stage functionalization of drug molecules. The stereospecific coupling is also achieved from readily available optically enriched P(O)-H compounds.

Recent advances in direct trifluoromethylation of olefinic C-H bonds

The aim of this review is to provide a comprehensive overview of the direct trifluoromethylation of olefinic C-H bonds with special attention on the mechanistic aspects of the reactions. The review is divided into two major sections. The first focuses exclusively on trifluoromethylation of terminal alkenes, while the second will cover trifluoromethylation of internal alkenes. Literature has been surveyed until the end of April 2019.

Cross-dehydrogenative coupling reactions between arenes (C-H) and carboxylic acids (O-H): a straightforward and environmentally benign access to O-aryl esters

Transition-metal catalyzed cross-dehydrogenative-coupling reactions encompass highly versatile and atom economical methods for the construction of various carbon-carbon and carbon-heteroatom bonds by combining two C(X)-H (X = heteroatom) bonds. Along this line, direct acyloxylation of C-H bonds with carboxylic acids has emerged as a powerful and green approach for the synthesis of structurally diverse esters. In this focus-review we will describe recent progress in direct esterification of aromatic C-H bonds with special emphasis on the mechanistic features of the reactions. Literature has been surveyed until the end of February 2019.

Recent developments in decarboxylative cross-coupling reactions between carboxylic acids and N–H compounds

Carboxylic acids and their derivatives are ubiquitous compounds in organic chemistry, and are widely commercially available in a large structural variety. Recently, carboxylic acids have been frequently used as non-toxic and environmentally benign alternatives to traditional organohalide coupling partners in various carbon–carbon and carbon–heteroatom cross-coupling reactions. Along this line, several methods have been reported for the synthesis of nitrogen-containing organic compounds through decarboxylative cross-coupling reactions between carboxylic acids and N–H compounds. This review focuses on recent advances and discoveries on these reactions with special attention on the mechanistic aspects of the reactions.

Carboxylic acids and their derivatives are ubiquitous compounds in organic chemistry, and are widely commercially available in a large structural variety.

Recent advances in the application of nano-catalysts for Hiyama cross-coupling reactions

This mini-review highlights the recent developments in the field of metal nanoparticle (NP) catalyzed Hiyama cross-coupling reactions.

A walk around the application of nanocatalysts for cross-dehydrogenative coupling of C–H bonds

Cross-dehydrogenative coupling reactions between two unmodified C–H bonds are one of the most attractive and fundamental strategies for the construction of C–C bonds. As these reactions avoid pre-functionalization and de-functionalization of the substrates, they are cleaner, safer, and faster than traditional cross-coupling reactions. After the introduction of the modern area of cross-dehydrogenative coupling in 2003, many efforts have been devoted to the development of more efficient and selective catalytic systems for these appealing reactions. Among the different types of catalytic systems that have been investigated, nanostructured metal catalysts are highly attractive in view of their high catalytic performance, easy separability and good reusability. The purpose of this review is to focus on the application of nanocatalysts for cross-dehydrogenative coupling of C–H bonds with particular emphasis on the mechanistic aspects of the reactions. Specifically, we have structured this review based on the type of C–C bonds. Thus, the review is divided into six major sections: (i) C(sp³)–C(sp³) coupling; (ii) C(sp³)–C(sp²) coupling; (iii) C(sp³)–C(sp) coupling; (iv) C(sp²)–C(sp²) coupling; (v) C(sp²)–C(sp) coupling; and (vi) C(sp)–C(sp) coupling.

Cross-dehydrogenative coupling reactions between two unmodified C–H bonds are one of the most attractive and fundamental strategies for the construction of C–C bonds.

Methods for direct C(sp2)–H bonds azidation

Direct functionalization of C–H bonds has attracted great attention in recent years from the perspectives of atom and step economy.