Recent Advances in the Electro-Oxidation of Urea for Direct Urea Fuel Cell and Urea Electrolysis

CTAB-Assisted Synthesis of FeNi Alloy Nanoparticles: Effective and Stable Electrocatalysts for Urea Oxidation Reactions

Development of highly efficient electrocatalysts for treating urea-rich wastewater is an important problem in environmental management and energy production. In this work, an iron-nickel alloy (Fe-Ni alloy) was synthesized via soft-template cetyltrimethylammonium bromide (CTAB)-assisted precipitation using low-temperature calcination. The as-synthesized nanoalloy was characterized by X-ray diffraction (XRD), which revealed the formation of a face-centered cubic (FCC) structure of the Fe-Ni alloy; field emission-scanning electron microscopic (FE-SEM) analysis revealed the spherical shape of the Fe-Ni alloy; high-resolution transmission electron microscopy (HR-TEM) revealed the average size to be ∼33.09 nm; and X-ray photoelectron spectroscopy (XPS) showed the presence of Fe, Ni, C, and O components and their chemical composition and valence states in the Fe-Ni alloy. The electrochemical urea oxidation reaction (UOR) was investigated by conducting linear sweep voltammetry (LSV) tests on the synthesized electrocatalysts with different Ni/Fe ratios in alkaline electrolytes with urea. The potential required to reach a current density of 10 mA cm-2 is 1.27 V vs RHE, which demonstrates the higher electrochemical activity of the Fe-Ni alloy compared to other individual compounds. This could be due to CTAB which improved the structural stability and synergetic and electronic effects in the nanoscale. This study will further contribute to renewable energy generation technology with long-term energy sustainability and also opens up great potential for reducing water pollution.

Urea catalytic oxidation for energy and environmental applications

Urea is one of the most essential reactive nitrogen species in the nitrogen cycle and plays an indispensable role in the water-energy-food nexus. However, untreated urea or urine wastewater causes severe environmental pollution and threatens human health. Electrocatalytic and photo(electro)catalytic urea oxidation technologies under mild conditions have become promising methods for energy recovery and environmental remediation. An in-depth understanding of the reaction mechanisms of the urea oxidation reaction (UOR) is important to design efficient electrocatalysts/photo(electro)catalysts for these technologies. This review provides a critical appraisal of the recent advances in the UOR by means of both electrocatalysis and photo(electro)catalysis, aiming to comprehensively assess this emerging field from fundamentals and materials, to practical applications. The emphasis of this review is on the design and development strategies for electrocatalysts/photo(electro)catalysts based on reaction pathways. Meanwhile, the UOR in natural urine is discussed, focusing on the influence of impurity ions. A particular emphasis is placed on the application of the UOR in energy and environmental fields, such as hydrogen production by urea electrolysis, urea fuel cells, and urea/urine wastewater remediation. Finally, future directions, prospects, and remaining challenges are discussed for this emerging research field. This critical review significantly increases the understanding of current progress in urea conversion and the development of a sustainable nitrogen economy.

Manipulation of Electron Spins with Oxygen Vacancy on Amorphous/Crystalline Composite-Type Catalyst

By substituting the oxygen evolution reaction (OER) with the anodic urea oxidation reaction (UOR), it not only reduces energy consumption for green hydrogen generation but also allows purification of urea-rich wastewater. Spin engineering of the d orbital and oxygen-containing adsorbates has been recognized as an effective pathway for enhancing the performance of electrocatalysts. In this work, we report the fabrication of a bifunctional electrocatalyst composed of amorphous RuO2-coated NiO ultrathin nanosheets (a-RuO2/NiO) with abundant amorphous/crystalline interfaces for hydrogen evolution reaction (HER) and UOR. Impressively, only 1.372 V of voltage is required to attain a current density of 10 mA cm-2 over a urea electrolyzer. The increased oxygen vacancies in a-RuO2/NiO by incorporation of amorphous RuO2 enhance the total magnetization and entail numerous spin-polarized electrons during the reaction, which speeds up the UOR reaction kinetics. The density functional theory study reveals that the amorphous/crystalline interfaces promote charge-carrier transfer, and the tailored d-band center endows the optimized adsorption of oxygen-generated intermediates. This kind of oxygen vacancy induced spin-polarized electrons toward boosting HER and UOR kinetics and provides a reliable reference for exploration of advanced electrocatalysts.

Recent Advances in Hybrid Seawater Electrolysis for Hydrogen Production

Seawater electrolysis (SWE) is a promising and potentially cost-effective approach to hydrogen production, considering that seawater is vastly abundant and SWE is able to combine with offshore renewables producing green hydrogen. However, SWE has long been suffering from technical challenges including the high energy demand and interference of chlorine chemistry, leading electrolyzers to a low efficiency and short lifespan. In this context, hybrid SWE, operated by replacing the energy-demanding oxygen evolution reaction and interfering chlorine evolution reaction (CER) with a thermodynamically more favorable anodic oxidation reaction (AOR) or by designing innovative electrolyzer cells, has recently emerged as a better alternative, which not only allows SWE to occur in a safe and energy-saving manner without the notorious CER, but also enables co-production of value-added chemicals or elimination of environmental pollutants. This review provides a first account of recent advances in hybrid SWE for hydrogen production. The substitutional AOR of various small molecules or redox mediators, in couple with hydrogen evolution from seawater, is comprehensively summarized. Moreover, how the electrolyzer cell design helps in hybrid SWE is briefly discussed. Last, the current challenges and future outlook about the development of the hybrid SWE technology are outlined.

Tailoring the density of states of Ni(OH)2 with Ni0 towards solar urea wastewater splitting

Solar urea wastewater splitting is capable of producing hydrogen and degrading the urea pollutant simultaneously. Nickel hydroxide (Ni(OH)2) has been recognized as an effective cocatalyst for the urea oxidation reaction (UOR). But the lack of an efficient preparation method and a suitable Ni(OH)2 based cocatalyst limits the performances of solar urea wastewater splitting. Herein, a potential-cycling method is developed with a high-purity nickel plate serving as the counter electrode and nickel source in a three-electrode configuration. Spherical Ni0-doped Ni(OH)2 nanoparticles are successfully synthesized on the surface of TiO2 nanorod arrays. The photocurrent density of TiO2/Ni0:Ni(OH)2 can reach 0.56 mA cm-2 at 1.23 VRHE in 1 M NaOH and 0.33 M CO(NH2)2 mixed electrolyte under AM1.5G illumination, which is 1.75 and 1.93 times those of TiO2/Ni(OH)2 deposited using a normal potentiostatic method with nickel salt solution and pristine TiO2, respectively. Ni0 doping can significantly decrease the charge transfer resistance and provide a more favorable distribution of density of states of Ni(OH)2 for the UOR. Furthermore, Ni0:Ni(OH)2 decorated TiO2 photoanodes exhibit good photocurrent retention during 12 h continuous testing. This work expands the preparation technique of urea catalysts and the strategy for developing highly efficient nickel-based catalysts.

Modulation Strategies for the Preparation of High-Performance Catalysts for Urea Oxidation Reaction and Their Applications

Compared with the traditional electrolysis of water to produce hydrogen, urea-assisted electrolysis of water to produce hydrogen has significant advantages and has received extensive attention from researchers. Unfortunately, urea oxidation reaction (UOR) involves a complex six-electron transfer process leading to high overpotential, which forces researchers to develop high-performance UOR catalysts to drive the development of urea-assisted water splitting. Based on the UOR mechanism and extensive literature research, this review summarizes the strategies for preparing highly efficient UOR catalysts. First, the UOR mechanism is introduced and the characteristics of excellent UOR catalysts are pointed out. Aiming at this, the following modulation strategies are proposed to improve the catalytic performance based on summarizing various literature: 1) Accelerating the active phase formation to reduce initial potential; 2) Creating double active sites to trigger a new UOR mechanism; 3) Accelerating urea adsorption and promoting C─N bond cleavage to ensure the effective conduct of UOR; 4) Promoting the desorption of CO2 to improve stability and prevent catalyst poisoning; 5) Promoting electron transfer to overcome the inherent slow dynamics of UOR; 6) Increasing active sites or active surface area. Then, the application of UOR in electrochemical devices is summarized. Finally, the current deficiencies and future directions are discussed.

Bifunctional Al-Doped Cobalt Ferrocyanide Nanocube Array for Energy-Saving Hydrogen Production via Urea Electrolysis

The very slow anodic oxygen evolution reaction (OER) greatly limits the development of large-scale hydrogen production via water electrolysis. By replacing OER with an easier urea oxidation reaction (UOR), developing an HER/UOR coupling electrolysis system for hydrogen production could save a significant amount of energy and money. An Al-doped cobalt ferrocyanide (Al-Co2Fe(CN)6) nanocube array was in situ grown on nickel foam (Al-Co2Fe(CN)6/NF). Due to the unique nanocube array structure and regulated electronic structure of Al-Co2Fe(CN)6, the as-prepared Al-Co2Fe(CN)6/NF electrode exhibited outstanding catalytic activities and long-term stability to both UOR and HER. The Al-Co2Fe(CN)6/NF electrode needed potentials of 0.169 V and 1.118 V (vs. a reversible hydrogen electrode) to drive 10 mA cm-2 for HER and UOR, respectively, in alkaline conditions. Applying the Al-Co2Fe(CN)6/NF to a whole-urea electrolysis system, 10 mA cm-2 was achieved at a cell voltage of 1.357 V, which saved 11.2% electricity energy compared to that of traditional water splitting. Density functional theory calculations demonstrated that the boosted UOR activity comes from Co sites with Al-doped electronic environments. This promoted and balanced the adsorption/desorption of the main intermediates in the UOR process. This work indicates that Co-based materials as efficient catalysts have great prospects for application in urea electrolysis systems and are expected to achieve low-cost and energy-saving H2 production.

Spherical Ni/NiO nanoparticles decorated on nanoporous carbon (NNC) as an active electrode material for urea and water oxidation reactions

Herein, we report a chemical method for scalable synthesis of spherical Ni/NiO nanoparticle-decorated nanoporous carbon (NNC) based electrocatalytic system using a simple and easy chemical method with ultra-high activity towards urea electrooxidation. Morphological analysis by scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HR-TEM) confirms the formation of Ni/NiO NPs on highly nanoporous carbon with an average size of ∼50 nm. X-ray diffraction (XRD) confirms NNC with a face-centred cubic (FCC) crystal structure. Ni/NiO NPs intercalated with nanoporous carbon exhibited the best electrocatalytic performance towards urea oxidation with an ultra-low onset potential of ∼0.33 V vs. SCE, and faster electrokinetic mechanism confirmed from Tafel slope (∼45 mV dec-1), EIS Rct (∼6.98 Ω), and long term durability for 7 h at 10 mA cm-2 with high CO poisoning tolerance. This work affords noble metal-free electrocatalysts for novel appliances and remarkable potential for urea determination, hydrogen generation, real-time water remediation, and energy conversion.

Surface Engineering over Metal-Organic Framework Nanoarray to Realize Boosted and Sustained Urea Oxidation

Facilitating C─N bond cleavage and promoting *COO desorption are essential yet challenging in urea oxidation reactions (UORs). Herein a novel interfacial coordination assembly protocol is established to modify the Co-phytate coordination complex on the Ni-based metal-organic framework (MOF) nanosheet array (CC/Ni-BDC@Co-PA) toward boosted and sustained UOR electrocatalysis. Comprehensive experimental and theoretical investigations unveil that surface Co-PA modification over Ni-BDC can manipulate the electronic state of Ni sites, and in situ evolved charge-redistributed surface can promote urea adsorption and the subsequent C─N bond cleavage. Impressively, Co-PA functionalization can impart a negatively charged catalyst surface with improved aerophobicity, not only weakening *COO adsorption and promoting CO2 departure, but also repelling CO3 2- approaching to deactivate Ni species, eventually alleviating CO2 poisoning and enhancing operational durability. Beyond that, improved hydrophilic and aerophobic characteristics would also contribute to better mass transfer kinetics. Consequently, CC/Ni-BDC@Co-PA exhibits prominent UOR performance with an ultralow potential of 1.300 V versus RHE to attain 10 mA cm-2 , a small Tafel slope of 45 mV dec-1 , and strong durability, comparable to the best Ni-based electrocatalysts documented thus far. This work affords a novel paradigm to construct MOF-based materials for promoted and sustained UOR catalysis through elegant surface engineering based on a metal-PA complex.

Portable, wearable and implantable artificial kidney systems: needs, opportunities and challenges

Haemodialysis is life sustaining but expensive, provides limited removal of uraemic solutes, is associated with poor patient quality of life and has a large carbon footprint. Innovative dialysis technologies such as portable, wearable and implantable artificial kidney systems are being developed with the aim of addressing these issues and improving patient care. An important challenge for these technologies is the need for continuous regeneration of a small volume of dialysate. Dialysate recycling systems based on sorbents have great potential for such regeneration. Novel dialysis membranes composed of polymeric or inorganic materials are being developed to improve the removal of a broad range of uraemic toxins, with low levels of membrane fouling compared with currently available synthetic membranes. To achieve more complete therapy and provide important biological functions, these novel membranes could be combined with bioartificial kidneys, which consist of artificial membranes combined with kidney cells. Implementation of these systems will require robust cell sourcing; cell culture facilities annexed to dialysis centres; large-scale, low-cost production; and quality control measures. These challenges are not trivial, and global initiatives involving all relevant stakeholders, including academics, industrialists, medical professionals and patients with kidney disease, are required to achieve important technological breakthroughs.

Multistep Dissolution of Lamellar Crystals Generates Superthin Amorphous Ni(OH)2 Catalyst for UOR

Urea oxidation reaction (UOR) is an ideal replacement of the conventional anodic oxygen evolution reaction (OER) for efficient hydrogen production due to the favorable thermodynamics. However, the UOR activity is severely limited by the high oxidation potential of Ni-based catalysts to form Ni³⁺ , which is considered as the active site for UOR. Herein, by using in situ cryoTEM, cryo-electron tomography, and in situ Raman, combined with theoretical calculations, a multistep dissolution process of nickel molybdate hydrate is reported, whereby NiMoO₄ ·xH₂ O nanosheets exfoliate from the bulk NiMoO₄ ·H₂ O nanorods due to the dissolution of Mo species and crystalline water, and further dissolution results in superthin and amorphous nickel (II) hydroxide (ANH) flocculus catalyst. Owing to the superthin and amorphous structure, the ANH catalyst can be oxidized to NiOOH at a much lower potential than conventional Ni(OH)₂ and finally exhibits more than an order of magnitude higher current density (640 mA cm^-2 ), 30 times higher mass activity, 27 times higher TOF than those of Ni(OH)₂ catalyst. The multistep dissolution mechanism provides an effective methodology for the preparation of highly active amorphous catalysts.

Recent Advances on Transition-Metal-Based Layered Double Hydroxides Nanosheets for Electrocatalytic Energy Conversion

Transition-metal-based layered double hydroxides (TM-LDHs) nanosheets are promising electrocatalysts in the renewable electrochemical energy conversion system, which are regarded as alternatives to noble metal-based materials. In this review, recent advances on effective and facile strategies to rationally design TM-LDHs nanosheets as electrocatalysts, such as increasing the number of active sties, improving the utilization of active sites (atomic-scale catalysts), modulating the electron configurations, and controlling the lattice facets, are summarized and compared. Then, the utilization of these fabricated TM-LDHs nanosheets for oxygen evolution reaction, hydrogen evolution reaction, urea oxidation reaction, nitrogen reduction reaction, small molecule oxidations, and biomass derivatives upgrading is articulated through systematically discussing the corresponding fundamental design principles and reaction mechanism. Finally, the existing challenges in increasing the density of catalytically active sites and future prospects of TM-LDHs nanosheets-based electrocatalysts in each application are also commented.

Amorphous dominated metal hydroxide-organic framework with compositional and structural heterogeneity for enhancing anodic electro-oxidation reactions

Inorganic-organic hybrids are promising anode catalysts to realize high activity and stability. Herein, an amorphous-dominated transition metal hydroxide-organic framework (MHOF) with isostructural mixed-linker was successfully synthesized on nickel foam (NF) substrate. The designed IML₂₄-MHOF/NF exhibited remarkable electrocatalytic activity with an ultralow overpotential of 271 mV for oxygen evolution reaction (OER) and a potential of 1.29 V vs. reversible hydrogen electrode for urea oxidation reaction (UOR) at 10 mA·cm^-2. Furthermore, the IML₂₄-MHOF/NF||Pt-C cell required only 1.31 V for urea electrolysis at 10 mA·cm^-2, which was much smaller than traditional water splitting (1.50 V). When coupled with UOR, the hydrogen yield rate was faster (1.04 mmol·h^-1) than with OER (0.32 mmol·h^-1) at 1.6 V. The structure characterizations, together with operando monitoring, including operando Raman, Fourier transform infrared, electrochemical impedance spectroscopy, and alcohol molecules probe, revealed that: (1) amorphous IML₂₄-MHOF/NF prefers self-adaptive reconstruction into active intermediate species against the external stimulus; (2) pyridine-3,5-dicarboxylate-incorporation into parent framework reconfigures electronic structure of system, thus mediating the absorption of oxygen-containing reactants during anodic oxidation reactions, such as O* and COO*. This work provides a new approach for boosting the catalytic activity of anodic electro-oxidation reactions by trimming the structure of MHOF-based catalysts.

3D Hierarchical-Architectured Nanoarray Electrode for Boosted and Sustained Urea Electro-Oxidation

Exploring active and durable Ni-based materials with optimized electronic and architectural engineering to promote the urea oxidation reaction (UOR) is pivotal for the urea-related technologies. Herein a 3D self-supported hierarchical-architectured nanoarray electrode (CC/MnNi@NC) is proposed in which 1D N-doped carbon nanotubes (N-CNTs) with 0D MnNi nanoparticles (NPs) encapsulation are intertwined into 2D nanosheet aligned on the carbon cloth for prominently boosted and sustained UOR electrocatalysis. From combined experimental and theoretical investigations, Mn-alloying can regulate Ni electronic state with downshift of the d-band center, facilitating active Ni³⁺ species generation and prompting the rate-determining step (*COO intermediate desorption). Meanwhile, the micro/nano-hierarchical nanoarray configuration with N-CNTs encapsulating MnNi NPs can not only endow strong operational durability against metal corrosion/agglomeration and enrich the density of active sites, but also accelerate electron transfer, and more intriguingly, promote mass transfer as a result of desirable superhydrophilic and quasi-superaerophobic characteristics. Therefore, with such elegant integration of 0D, 1D and 2D motifs into 3D micro/nano-hierarchical architecture, the resulting CC/MnNi@NC can deliver admirable UOR performance, favorably comparable to the best-performing UOR electrocatalysts reported thus far. This work opens a fresh prospect in developing advanced electrocatalysts via electronic manipulation coupled with architectural engineering for various energy conversion technologies.

Unconventional Phase Synergies with Doping Engineering Over Ni Electrocatalyst Featuring Regulated Electronic State for Accelerated Urea Oxidation

Exploring high-performing Ni-based electrocatalysts for the urea oxidation reaction (UOR) is crucial for developing urea-related energy technologies yet remains a daunting challenge. In this study, a synergistic anomalous hcp phase and heteroatom doping engineering over metallic Ni are found to enhance the UOR. A metal-organic framework-mediated approach is proposed to construct Ni nanoparticles (NPs) with designated crystal phase embedded in N-doped carbon (fcc-Ni/NC and hcp-Ni/NC). Significant crystal phase-dependent catalytic activity for the UOR is observed; hcp-Ni/NC, featuring unusual hcp phase, outperforms fcc-Ni/NC with conventional fcc phase. Moreover, incorporating foreign Mn species in hcp-Ni/NC can further dramatically promote UOR, making it among the best UOR catalysts reported to date. From experimental results and DFT calculations, the specific nanoarchitecture, involving an anomalous hcp phase together with Mn doping engineering, endows hcp-MnNi/NC with abundant exposed active sites, facile charge transfer, and more significantly, optimized electronic state, giving rise to enriched Ni³⁺ active species and oxygen vacancies on the catalyst surface during electrocatalysis. These features collectively contribute to the enhanced UOR activity. This work highlights a potent design strategy to develop advanced catalysts with regulated electronic state through synergistic crystal phase and doping engineering.

High-Density NiCu Bimetallic Phosphide Nanosheet Clusters Constructed by Cu-Induced Effect Boost Total Urea Hydrolysis for Hydrogen Production

The development of urea electrolysis technologies toward energy-saving hydrogen production can alleviate the environmental issues caused by urea-rich wastewater. In the current practices, the development of high-performance electrocatalysts in urea electrolysis remains critical. In this work, the NiCu-P/NF catalyst is prepared by anchoring Ni/Cu bimetallic phosphide nanosheets onto Ni foam (NF). In the experiments, the micron-sized elemental Cu polyhedron is first anchored on the surface of the NF substrate to provide more space for the growth of bimetallic nanosheets. Meanwhile, the Cu element adjusted the electron distribution within the composite and formed Ni/P orbital vacancies, which in turn accelerated the kinetic process. As a result, the optimal NiCu-P/NF sample exhibits excellent catalytic activity and cycling stability in a hybrid electrolysis system for the urea oxidation reaction (UOR) and hydrogen evolution reaction (HER). Further, the alkaline urea-containing electrolyzer is assembled with NiCu-P/NF as two electrodes reached a current density of 50 mA cm^-2 with a low driving potential of 1.422 V, which outperforms the typical commercial noble metal electrolyzer (RuO₂||Pt/C). Those findings suggest the feasibility of the substrate regulation strategy to increase the growth density of active species in preparation of an efficient bifunctional electrocatalyst for cracking the urea-containing wastewater.

The effect of tensile strain in Pd-Ni core-shell nanocubes with tuneable shell thickness on urea electrolysis selectivity

Expanding our understanding of the structure-performance relationship in nanoscale electrocatalysts for urea electrolysis is crucial for efficient urea waste treatment and concomitant cathodic hydrogen production or CO₂ reduction. Here, we elucidate the effect of the lattice strain in Pd-Ni core-shell nanocubes on the dominance of urea overoxidation pathway.

Ni-Doped MnO2 Nanosheet Arrays for Efficient Urea Oxidation

Urea oxidation reaction (UOR), with a low thermodynamic potential, offers great promise for replacing anodic oxygen evolution reaction of electrolysis systems such as water splitting, carbon dioxide reduction, etc., thus reducing the overall energy consumption. To promote the sluggish kinetics of UOR, highly efficient electrocatalysts are required, and Ni-based materials have been widely investigated. However, most of these reported Ni-based catalysts suffer from large overpotentials, as they generally undergo self-oxidation to form NiOOH species at high potentials, which act as catalytically active sites for UOR. Herein, Ni-doped MnO₂ (Ni-MnO₂) nanosheet arrays were successfully prepared on nickel foam. The as-fabricated Ni-MnO₂ shows distinct UOR behavior with most of the previously reported Ni-based catalysts, as urea oxidation on Ni-MnO₂ proceeds before the formation of NiOOH. Notably, a low potential of 1.388 V vs reversible hydrogen electrode was required to achieve a high current density of 100 mA cm^-2 on Ni-MnO₂. It is suggested that both Ni doping and nanosheet array configuration are responsible for the high UOR activities on Ni-MnO₂. The introduction of Ni modifies the electronic structure of Mn atoms, and more Mn³⁺ species are generated in Ni-MnO₂, contributing to its outstanding UOR performance.

Amorphous chromium oxide confined Ni/NiO nanoparticles-assembled nanosheets for highly efficient and stable overall urea splitting

Applications of urea oxidation reaction (UOR) in various sustainable energy-conversion systems are greatly hindered by its slow kinetics. Herein, we demonstrate an in-situ confined synthesis method that produces amorphous chromium oxide confined Ni/NiO nanoparticles-assembled nanosheets (Ni/NiO@CrOx) with fast reaction kinetics towards UOR. The confinement effect of the in-situ generated CrOx overlay contributes to ultrafine Ni/NiO nanoparticles, bringing about rich Ni/NiO and NiO/CrOx interfaces. In-situ Raman and electrochemical characterization show that both CrOx and metallic Ni can promote the formation of the NiOOH species and the electron transfer, leading to high intrinsic activity and fast reaction kinetics. At 1.40 V vs. reversible hydrogen electrode, the Ni/NiO@CrOx delivers a current density of 275 mA cm-2, which is about 2.6 and 6.1 times as large as those of the NiO@CrOx and NiO, respectively. In addition, the protective effect of the CrOx overlay leads to robust working stability towards UOR. Further, the Ni/NiO@CrOx nanosheets are used as bifunctional catalysts for overall urea splitting, and a small electrolysis cell voltage of 1.44 V is needed to reach the benchmark current density of 10 mA cm-2.

Increasing power generation to a single-chamber compost soil urea fuel cell for carbon-neutral bioelectricity generation: A novel approach

Microbial fuel cells (CS-UFC) utilize waste resources containing biodegradable materials that play an essential role in green energy. MFC technology generates "carbon-neutral" bioelectricity and involves a multidisciplinary approach to microbiology. MFCs will play an important role in the harvesting of "green electricity." In this study, a single-chamber urea fuel cell is fabricated that uses these different wastewaters as fuel to generate power. Soil has been used to generate electrical power in microbial fuel cells and exhibited several potential applications to optimize the device; the urea fuel concentration is varied from 0.1 to 0.5 g/mL in a single-chamber compost soil urea fuel cell (CS-UFC). The proposed CS-UFC has a high power density and is suitable for cleaning chemical waste, such as urea, as it generates power by consuming urea-rich waste as fuel. The CS-UFC generates 12 times higher power than conventional fuel cells and exhibits size-dependent behavior. The power generation increases with a shift from the coin cell toward the bulk size. The power density of the CS-UFC is 55.26 mW/m². This result confirmed that urea fuel significantly affects the power generation of single-chamber CS-UFC. This study aimed to reveal the effect of soil properties on the generated electric power from soil processes using waste, such as urea, urine, and industrial-rich wastewater as fuel. The proposed system is suitable for cleaning chemical waste; moreover, the proposed CS-UFC is a novel, sustainable, cheap, and eco-friendly design system for soil-based bulk-type design for large-scale urea fuel cell applications.

Ni2P Nanoparticle-Inserted Porous Layered NiO Hetero-Structured Nanosheets as a Durable Catalyst for the Electro-Oxidation of Urea

The electro-oxidation of urea (EOU) is a remarkable but challenging sustainable technology, which largely needs a reduced electro-chemical potential, that demonstrates the ability to remove a notable harmful material from wastewater and/or transform the excretory product of humans into treasure. In this work, an Ni₂P-nanoparticle-integrated porous nickel oxide (NiO) hetero-structured nanosheet (Ni₂P@NiO/NiF) catalyst was synthesized through in situ acid etching and a gas-phase phosphating process. The as-synthesized Ni₂P@NiO/NiF catalyst sample was then used to enhance the electro-oxidation reaction of urea with a higher urea oxidation response (50 mA cm^-2 at 1.31 V vs. RHE) and low onset oxidation potential (1.31 V). The enhanced activity of the Ni₂P@NiO/NiF catalyst was mainly attributed to effective electron transport after Ni₂P nanoparticle insertion through a substantial improvement in active sites due to a larger electrochemical surface area, and a faster diffusion of ions occurred via the interactive sites at the interface of Ni₂P and NiO; thus, the structural reliability was retained, which was further evidenced by the low charge transfer resistance. Further, the Ni₂P nanoparticle insertion process into the NiO hetero-structured nanosheets effectively enabled a synergetic effect when compared to the counter of the Ni₂P/NiF and NiO/NiF catalysts. Finally, we demonstrate that the as-synthesized Ni₂P@NiO/NiF catalyst could be a promising electrode for the EOU in urea-rich wastewater and human urine samples for environmental safety management. Overall, the Ni₂P@NiO/NiF catalyst electrode combines the advantages of the Ni₂P catalyst, NiO nanosheet network, and NiF current collector for enhanced EOU performance, which is highly valuable in catalyst development for environmental safety applications.

Recent Development of Nickel-Based Electrocatalysts for Urea Electrolysis in Alkaline Solution

Recently, urea electrolysis has been regarded as an up-and-coming pathway for the sustainability of hydrogen fuel production according to its far lower theoretical and thermodynamic electrolytic cell potential (0.37 V) compared to water electrolysis (1.23 V) and rectification of urea-rich wastewater pollution. The new era of the "hydrogen energy economy" involving urea electrolysis can efficiently promote the development of a low-carbon future. In recent decades, numerous inexpensive and fruitful nickel-based materials (metallic Ni, Ni-alloys, oxides/hydroxides, chalcogenides, nitrides and phosphides) have been explored as potential energy saving monofunctional and bifunctional electrocatalysts for urea electrolysis in alkaline solution. In this review, we start with a discussion about the basics and fundamentals of urea electrolysis, including the urea oxidation reaction (UOR) and the hydrogen evolution reaction (HER), and then discuss the strategies for designing electrocatalysts for the UOR, HER and both reactions (bifunctional). Next, the catalytic performance, mechanisms and factors including morphology, composition and electrode/electrolyte kinetics for the ameliorated and diminished activity of the various aforementioned nickel-based electrocatalysts for urea electrolysis, including monofunctional (UOR or HER) and bifunctional (UOR and HER) types, are summarized. Lastly, the features of persisting challenges, future prospects and expectations of unravelling the bifunctional electrocatalysts for urea-based energy conversion technologies, including urea electrolysis, urea fuel cells and photoelectrochemical urea splitting, are illuminated.

Activating Lattice Oxygen in Layered Lithium Oxides through Cation Vacancies for Enhanced Urea Electrolysis

Despite the fact that high-valent nickel-based oxides exhibit promising catalytic activity for the urea oxidation reaction (UOR), the fundamental questions concerning the origin of the high performance and the structure-activity correlations remain to be elucidated. Here, we unveil the underlying enhanced mechanism of UOR by employing a series of prepared cation-vacancy controllable LiNiO₂ (LNO) model catalysts. Impressively, the optimized layered LNO-2 exhibits an extremely low overpotential at 10 mA cm^-2 along with excellent stability after the 160 h test. Operando characterisations combined with the theoretical analysis reveal the activated lattice oxygen in layered LiNiO₂ with moderate cation vacancies triggers charge disproportion of the Ni site to form Ni⁴⁺ species, facilitating deprotonation in a lattice oxygen involved catalytic process.

Recent progress in direct urea fuel cell

Direct urea fuel cell (DUFC) has attracted many researchers’ attention due to the use of wastewater, for example urine, which contains urea for the fuel. The main factor to improve the electrochemical oxidation performance of urea and further enhance the performances of DUFC is the use of a good anode catalyst. Non-noble metal catalyst, such as nickel, is reported to have a good catalytic activity in alkaline medium towards urea electro-oxidation. Besides optimizing the anode catalyst, the use of supporting electrode which has a large surface area as well as the use of H2O2 as an oxidant to replace O2 could help to improve the performances. The recent progress in anode catalysts for DUFC is overviewed in this article. In addition, the advantages and disadvantages as well as the factors that could help to escalate the performance of DUFC are discussed together with the challenges and future perspectives.

Promoting urea oxidation and water oxidation through interface construction on a CeO2@CoFe2O4 heterostructure

Spinel ferrites are considered practical and promising oxygen evolution reaction (OER) and urea oxidation reaction (UOR) electrocatalysts because of their advantages in the adsorption and activation of electrocatalytic substances. A CeO₂ functional metal oxide was used to modify a spinel oxide in order to further improve the electrocatalytic performance of the spinel oxide. In this work, a CeO₂@CoFe₂O₄/NF hybrid nanostructure was synthesized for the first time by typical hydrothermal and calcination methods. In an alkaline medium, CeO₂@CoFe₂O₄/NF displays superior OER activity and needs an overpotential of 213 mV to deliver a current density of 100 mA cm^-2, which makes it one of the most active catalysts reported so far. In addition, the as-prepared CeO₂@CoFe₂O₄/NF material needs a potential of 1.40 V at the same current density in 1.0 M KOH with 0.5 M urea, which displays superior UOR activity. The CeO₂@CoFe₂O₄/NF catalyst also displays good durability and the performance of the electrode is negligibly attenuated at a large current intensity of 125 mA cm^-2. Experimental results demonstrate that the activity of the CeO₂@CoFe₂O₄/NF catalyst is ascribed to the exposure of more active centers and a faster electron transfer rate. This work develops a novel method for exploiting Earth-abundant, robust and environmentally friendly OER and UOR electrocatalysts.

Ni3S2/Ni Heterostructure Nanobelt Arrays as Bifunctional Catalysts for Urea-Rich Wastewater Degradation

Urea electrolysis is a cost-effective method for urea-rich wastewater degradation to achieve a pollution-free environment. In this work, the Ni₃S₂/Ni heterostructure nanobelt arrays supported on nickel foam (Ni₃S₂/Ni/NF) are synthesized for accelerating the urea oxidation reaction (UOR) and hydrogen evolution reaction (HER). It only needs ultralow potentials of 1.30 V and -54 mV to achieve the current density of ±10 mA cm^-2 for UOR and HER, respectively. Meanwhile, the overall urea oxidation driven by Ni₃S₂/Ni/NF only needs 1.36 V to achieve 10 mA cm^-2, and it can remain at 100 mA cm^-2 for 60 h without obvious activity attenuation. The superior performance could be attributed to the heterostructure between Ni₃S₂ and Ni, which can promote electron transfer and form electron-poor Ni species to optimize urea decomposition and hydrogen production. Moreover, the nanobelt self-supported structure could expose abundant active sites. This work thus provides a feasible and cost-effective strategy for urea-rich wastewater degradation and hydrogen production.

A three-dimensional nanostructure of NiFe(OH) X nanoparticles/nickel foam as an efficient electrocatalyst for urea oxidation

Developing high-performance electrocatalysts for urea oxidation reaction (UOR) can not only solve the problem of environmental pollution, but also solve the problem of the energy crisis by producing hydrogen for electrodes. The preparation of porous three-dimensional nanostructures as efficient electrocatalysts has become important work. Here, we developed a novel three-dimensional (3D) nanostructure of NiFe(OH) X nanoparticles/nickel foam with a high active area by a simple electroplating method and a subsequent treatment with ferric ion solution. This structure shows much greater UOR activity than the control sample (Ni/Ni foam) with the potential of 1.395 V (vs. RHE) (with an overpotential of 1.025 V) for driving the current density of 100 mA cm-2 in 1.0 M KOH electrolyte with 0.33 M urea. This work not only provides rapid and large-scale preparation of a three-dimensional nanostructure, but also gives a new way to design and obtain high-performance electrocatalysts.

Coaxial Ni-S@N-Doped Carbon Nanofibers Derived Hierarchical Electrodes for Efficient H2 Production via Urea Electrolysis

Electrochemical water splitting into hydrogen is a promising strategy for hydrogen production powered by solar energy. However, the cell voltage of an electrolyzer is still too high for practical application, which is mainly limited by the sluggish oxygen evolution reaction process. To this end, hybrid water electrolyzers have drawn tremendous attention. Herein, coaxial Ni/Ni₃S₂@N-doped nanofibers are directly grown on nickel foam (NF), which is highly active for hydrogen evolution reaction. Meanwhile, the Ni₃S₂@N-doped nanofibers on NF prepared in an Ar atmosphere display superior urea oxidation reaction performance to previously reported catalysts. The cell voltage is about 1.50 V in urea electrolysis to deliver a current density of 20 mA cm^-2, lower than that of a traditional water electrolyzer (1.82 V). The current density is around 77% relative to its initial value of 20 mA cm^-2 after 20 h, superior to Pt/C|Ir/C-based urea electrolysis (14%). It is found that the synergistic effect between metallic Ni and Ni₃S₂, as well as the interfacial effect between metal centers and N-doped carbon, favors the initial dissociation of H₂O and the adsorption/desorption of H* with thermal neutral Gibbs free energy. Meanwhile, the in-situ generated NiOOH on the outer surface of Ni₃S₂ possessed lower electrochemical activation energy for urea decomposition. Meanwhile, the abundant oxygen vacancies in electrodes could expose more active sites for the adsorption of intermediates, including H* and OOH*. It is also found that the hierarchical nanostructure of densely packed nanowires provides ideal electronic and ionic transport paths for fast electrocatalytic kinetics. The present work indicated that the modulation of compositions and hierarchical nanostructure is effective to prepare efficient catalysts for H₂ production via urea electrolysis.

Hollow bimetallic selenide derived from a hierarchical MOF-based Prussian blue analogue for urea electrolysis

PBA@MOF–Ni/Se with a nanocube structure grown on a flower-shaped MOF–Ni template exhibits better performance in urea electrolysis.

Novel Bifunctional V2O3 Nanosheets Coupled with N-Doped-Carbon Encapsulated Ni Heterostructure for Enhanced Electrocatalytic Oxidation of Urea-Rich Wastewater

Developing high performance bifunctional transition metal catalysts would be significantly beneficial for electrocatalytic oxidation of urea-rich wastewater. Herein, we synthesize a V₂O₃ nanosheet anchored N-doped-carbon encapsulated Ni heterostructure (Ni@C-V₂O₃/NF) for the reactions of urea oxidation (UOR) and hydrogen evolution (HER). Electrochemical results indicate that it exhibits small potentials of 1.32, 1.39, and 1.43 V for UOR and low overpotentials of 36, 254, and 355 mV for HER at ±10, ± 500 and ±1000 mA cm^-2, respectively. It can work at 100 mA cm^-2 for over 72 h as cathode and anode electrode without obvious attenuation, suggesting an outstanding durability. The reason for this behavior could be ascribed to the N-doped-carbon coating structure, the synergetic effects between Ni and V₂O₃, and the nano/micro nanosheets architecture self-supported on nickel foam. This work could provide a promising, inexpensive, and green method for the degradation of urea-rich wastewater and hydrogen production.