Removal of hazardous basic dyes from aqueous solution by adsorption onto kaolinite and acid-treated kaolinite: kinetics, isotherm and mechanistic study

Removal of malachite green from wastewater using date seeds as natural adsorbent; isotherms, kinetics, Thermodynamic, and batch adsorption process design

This research explores the feasibility of using date seeds (DS), an agricultural waste, for the adsorption of malachite green (MG) dye from synthesized wastewater. The characterization of the DS before and after adsorption was accomplished by FTIR, SEM, BET, and EDX measurements. Batch adsorption experiments were investigated for MG dye adsorption from aqueous solution onto the DS. The effect of different parameters such as solution pH, adsorbent dose, contact time, temperature, and the initial dye concentration were studied. The optimum pH, adsorbent dose, temperature, and contact time for the dye removal were found to be 5, 0.1 g, 25 °C, and 30 min, respectively. The equilibrium studies for the data with Langmuir, Freundlich, and Temkin isotherms showed that Freundlich isotherm is the best model to describe the adsorption of MG onto the DS particles which has a heterogeneous surface. It was found that the adsorption process follows a pseudo-second-order kinetic model which revealed that the intra-particle diffusion stage is the rate-controlling stage for the process. The thermodynamic parameters ΔG, ΔS, and ΔH suggest the possibility of chemisorption and physisorption simultaneously and indicate the exothermic and spontaneous characters of the adsorption of MG dye on DS with negative values of ΔH and ΔG.

Effective adsorption of fluorescent congo red azo dye from aqueous solution by green synthesized nanosphere ZnO/CuO composite using propolis as bee byproduct extract

The indirect dumping of massive volumes of toxic dyes into water has seriously affected the ecosystem. Owing to the many applications of the designed nanomaterials in the manufacturing process, there is a lot of research interest in synthesizing nanomaterials using green processes. In this research, the byproduct of bee was employed to synthesize nanoparticles (NPs) of ZnO, CuO, and biosynthesized ZnO/CuO (BZC) nanocomposite via utilizing a green and simple approach. To validate the effective fabrication of BZC nanocomposite, various characterization measurements were applied. FTIR analysis identified the functional groups in charge of producing nanoparticles and nanocomposites. Moreover, the existence of ZnO and CuO XRD peaks suggests that the nanocomposites were successfully biosynthesized. The high-resolution XPS spectrum of the BZC nanocomposite's Zn2p3, Cu2p3, and O1s were observed. Our findings indicate the successful engineering of the prepared nanomaterials and BZC nanocomposite. Our findings indicate the successful engineering of the prepared nanomaterials and BZC nanocomposite. For Congo red (CR) fluorescent stain azo dye elimination in water, all adsorption parameters were examined at room temperature. Moreover, the adsorption experiments revealed the removal capacity for uptake CR dye using BZC nanocomposite (90.14 mg g-1). Our results show that the BZC nanocomposite exhibited high removal capability for the adsorption of CR dye. The nanosphere adsorbent offered a simple, low-cost, and green approach for water purification and industrial wastewater control.

Application of Taguchi method, response surface methodology, DFT calculation and molecular dynamics simulation into the removal of orange G and crystal violet by treated biomass

In this work, the efficiency of the treated plant Carpobrotus edulis (TPCE) as an effective biosorbent for removing the orange G (OG) and crystal violet (CV) dyes from aqueous solution was investigated. TPCE was characterized by FT-IR, Ss, pHz and SEM-EDX. The influence of parameters such as bioadsorbent dose, contact time, initial concentration, temperature and pH was tested using Taguchi experimental design (TED) with L8 orthogonal array (five parameters in two levels). The initial concentration, bioadsorbent dose and contact time are the main parameters for the removal of CV and OG dyes, while the effects of pH and temperature are minimal. The maximum removal efficiency of dyes under optimal operating conditions was 97.93 % and 92.68 %, respectively. which at the optimal conditions of 3 g/L, pH 10, 20 mg/L, 35 °C, 5 min and 15 g/L, pH 4, 20 mg/L, 35 °C, 60 min for CV and OG dyes, respectively. The results of response surface methodology (RSM) and analysis of variance (ANOVA) showed that the initial concentration Ci of CV dye was the most significant factor in the adsorption efficiency with a contribution of 51.56 %. On the other hand, the OG bioadsorbent dose is the most important factor in adsorption efficiency with a percentage contribution of 56.41 %. The Density Functional Tight Binding (DFTB) method shows that dyes strongly bind the adsorbent surface. Monte Carlo and molecular dynamics simulations show significant interactions between dye and adsorbent surface. The reusability of biomaterial indicated that the adsorption performance dropped very slightly up to five cycles.

Visible light photocatalytic degradation of methylene blue and rhodamine B over silver-doped titanium dioxide nanocomposites supported on Fuller's earth

Silver-doped-titanium dioxide nanoparticles supported on Fuller's earth, prepared by the sol-gel method, were characterized with XRD, TGA, zeta potential, SEM, EDX, TEM, XPS, photoluminescence and UV-DRS measurements. The material, Ag-TiO2-Fuller's earth (AgTF), was tested for photocatalytic activity concerning the degradation of rhodamine B (RhB) and methylene blue (MB) in aqueous solution under visible light irradiation with pH, catalyst dosage, and dye concentration as the process variables. The degradation kinetics indicated pseudo-first-order kinetics with rate constant of (i) 0.55 min-1with 0.12 gL-1AgTF loading, 10-5 M MB at pH 9, and (ii) 0.53 min-1 with 0.08 g L-1 AgTF loading, 5 × 10-5 M RhB at pH 8. The methylene blue degradation was maximum (98.66%) for AgTF loading of 0.12 g L-1 while the maximum RhB degradation (96.34%) was attained with AgTF loading of 0.08 g L-1. With 5 × 10-6M MB concentration, the degradation achieved was 98% in 45 min and 100% in 60 min. One hundred per cent degradation of the dye, RhB (1 × 10-6 M) could be achieved in 30 min with 0.08 g L-1 AgTF at pH 8. The use of Fuller's earth, a cheap, abundant and large surface area support, increases the adsorbability of the dye on the catalyst surface and hence promotes the degradation. The catalyst could be removed easily from the reaction mixture and reused for up to five cycles without any significant decrease in activity. Scavengers such as triethanolamine (TEOA), p-benzoquinone (BQ) and isopropyl alcohol (IPA) were utilized to get some insight into the photocatalysis mechanism.

Fabrication of magnetic chitosan-grafted salicylaldehyde/nanoclay for removal of azo dye: BBD optimization, characterization, and mechanistic study

Herein, a novel nanohybrid composite of magnetic chitosan-salicylaldehyde/nanoclay (MCH-SAL/NCLA) was hydrothermally synthesized for removal of azo dye (acid red 88, AR88) from simulated wastewater. Response surface methodology combined with the Box-Behnken design (RSM-BBD) was applied with 29 experiments to assess the impact of adsorption variables, that include A: % NCLA loading (0-50), B: MCH-SAL/NCLA dose (0.02-0.1 g/100 mL), C: pH (4-10), and time D: (10-90 min) on AR88 dye adsorption. The highest AR88 removal (75.16 %) as per desirability function was attained at the optimum conditions (NCLA loading = 41.8 %, dosage = 0.06 g/100 mL, solution pH = 4, and time = 86. 17 min). The kinetic and equilibrium adsorption results of AR88 by MCH-SAL/NCLA reveal that the process follows the pseudo-first-order and Temkin models. The MCH-SAL/NCLA composite has a maximum adsorption capacity (173.5 mg/g) with the AR88 dye. The adsorption of AR88 onto the MCH-SAL/NCLA surface is determined by a variety of processes, including electrostatic, hydrogen bonding, n-π, and n-π interactions. This research revealed that MCH-SAL/NCLA can be used as a versatile and efficient bio-adsorbent for azo dye removal from contaminated wastewater.

Structural, elastic, electronic, and optical properties of NaAlSi3O8 and Al4[Si4O10](OH)8 from first-principles calculations

CONTEXT

Based on the first-principles calculations, this paper investigates the structural, elastic, electronic, and optical properties of albite and kaolinite, respectively. It is determined that both of them show structural stability, mechanical stability, and brittleness by calculating formation enthalpy, phonon dispersion, elastic, and mechanically relevant properties. Both materials are insulators with an indirect bandgap. By calculating the TDOS and PDOS, the main characteristics of the electronic structure of NaAlSi₃O₈ come from O-2p and Si-3p states, O-2p, and Al-3p states hybridization, similar to Al₄[Si₄O₁₀](OH)₈. The covalence of Si-O bonds in NaAlSi₃O₈ is greater than Al-O bonds, and the covalent property sequence of Si-O bands in NaAlSi₃O₈ is Si2-O3 > Si1-O4 > Si2-O2 > Si1-O8 > Si1-O6 > Si3-O2 > Si3-O4. The optical anisotropy of NaAlSi₃O₈ and Al₄[Si₄O₁₀](OH)₈ is analyzed.

METHODS

First-principles density functional theory (DFT) calculation was carried out by the CASTEP computer program. The GGA-PW91 exchange-correlation was used. The energy convergence tolerance, the maximum force, and the maximum displacement were set in the calculation.

Characterization of Carboxylic Acid Reductase from Mycobacterium phlei Immobilized onto Seplite LX120

A multi-domain oxidoreductase, carboxylic acid reductase (CAR), can catalyze the one-step reduction of carboxylic acid to aldehyde. This study aimed to immobilize bacterial CAR from a moderate thermophile Mycobacterium phlei (MpCAR). It was the first work reported on immobilizing bacterial CAR onto a polymeric support, Seplite LX120, via simple adsorption. Immobilization time and protein load were optimized for MpCAR immobilization. The immobilized MpCAR showed optimal activity at 60 °C and pH 9. It was stable over a wide range of temperatures (10 to 100 °C) and pHs (4–11), retaining more than 50% of its activity. The immobilized MpCAR also showed stability in polar solvents. The adsorption of MpCAR onto the support was confirmed by Scanning Electron Microscopy (SEM), Fourier-Transform Infrared (FTIR) spectroscopy, and Brunauer–Emmett–Teller (BET) analysis. The immobilized MpCAR could be stored for up to 6 weeks at 4 °C and 3 weeks at 25 °C. Immobilized MpCAR showed great operational stability, as 59.68% of its activity was preserved after 10 assay cycles. The immobilized MpCAR could also convert approximately 2.6 mM of benzoic acid to benzaldehyde at 60 °C. The successfully immobilized MpCAR on Seplite LX120 exhibited improved properties that benefit green industrial processes.

Silica Particles Derived from Natural Kaolinite for the Removal of Rhodamine B from Polluted Water

This manuscript deals with the thermal and chemical modification of a natural kaolinite that shows excellent performance in the capture of a cationic organic pollutant from the aqueous phase. Kaolinite was calcined at 700 °C and treated with HCl to remove aluminium and to obtain a siliceous material. The structural changes and the physico-chemical properties of the materials at different stages of thermal and chemical modification were investigated with several techniques, including XRPD, MAS-NMR, SEM-EDX, FT-IR, and N2 physisorption at 77 K. The ability of the parent kaolinite and siliceous material to capture the organic dye, Rhodamine B, from the aqueous phase was investigated by means of UV-Vis spectroscopy. The siliceous material exhibited better adsorption capacity with respect to the parent kaolinite. Finally, the functional stability of the siliceous material was tested over three cycles of regeneration and adsorption.

Dried Brown Seaweed's Phytoremediation Potential for Methylene Blue Dye Removal from Aquatic Environments

The dried form of the brown seaweed Sargassum latifolium was tested for its ability to remove toxic Methylene Blue Dye (MBD) ions from aqueous synthetic solutions and industrial wastewater effluents. In a batch adsorption experiment, different initial concentrations of MBD (5, 10, 20, 30, and 40 mg L-1), sorbent dosages (0.025, 0.05, 0.1, 0.2, 0.3, 0.4, and 0.5 g L-1), contact time (5, 10, 15, 30, 60, 120 min), pH (3, 5, 8, 10, and 12), and temperature (30, 40, 50, 60 °C) were observed. Dried powder of S. latifolium was characterized before and after adsorption of MBD using different techniques, such as FTIR, SEM, UV visible spectral examination, and BET techniques. The BET surface area suggests the formation of S. latifolium was 111.65 m2 g-1, and the average pore size was 2.19 nm. The obtained results showed that at an MBD concentration of 40 mg L-1, the adsorption was rapid in the first 5, 10, and 15 min of contact time, and an equilibrium was reached in about 60 and 120 min for the adsorption. At the optimum temperature of 30 °C and the adsorbent dose of 0.1 g L-1, approximately 94.88% of MBD were removed. To find the best-fit isotherm model, the error function equations are applied to the isotherm model findings. Both Tempkin and Freundlich isotherm models could appropriate the equilibrium data, as well as the pseudo 2nd order kinetics model due to high correlation coefficients (R2). Thermodynamic and Freundlich model parameters were assessed and showed that the mechanism of the sorption process occurs by an endothermic and physical process. According to the results of the experiments, S. latifolium is a promising environmentally friendly approach for eliminating MBD from the aqueous solution that is also cost-effective. This technology could be useful in addressing the rising demand for adsorbents employed in environmental protection processes.

A comprehensive review on the removal of noxious pollutants using carrageenan based advanced adsorbents

Rapid industrial development is associated with high discharge of toxic pollutants into the environment. The industries discharge their wastewater containing organic pollutants directly into the water system without treating them that has posed many serious threats to environmental protection. The use of bioadsorbents for the removal of such toxic pollutants from the waste water due to its simple synthesis, easy operation, effectiveness, and economic viability have emerged a new dimension in the wastewater treatment approaches. Various adsorbents have been prepared to examine their adsorption capacity against different adsorbates, but, to attain sustainability, biocompatibility, and biodegradation, bio-adsorbents have been found to won the battle. Seaweed derived polysaccharide; Carrageenan (CR) has been proven to be an excellent adsorbent for the wastewater treatment. It has been successfully modified with various components to form CR based-magnetic composites, hydrogels, nanoparticle modified CR composites and many others to enrich and diversify its properties. In this review, we have explained the adsorption behaviour of various carrageenan based adsorbents for the removal of different dyes. The influence of various parameters such as the effect of initial concentration, adsorbent dosage, contact time, pH, temperature, and ion concentration on dye adsorption is well explained. This paper also summarizes the structure, morphology, swelling ability, and thermal stability of carrageenan. The data also expounds on the adsorption capacity, kinetic model, isotherm model, and nature of the adsorption process. Different types of solvents are used for the regeneration and reusability of carrageenan adsorbents and their regeneration studies and desorption efficiency is well-explained. The adsorption mechanism of dyes onto carrageenan based adsorbents has been well described in this review. This review provides a deep insight about the use of carrageenan based adsorbents for the wastewater treatment.

Understanding of the mechanism of crystal violet adsorption on modified halloysite: Hydrophobicity, performance, and interaction

Halloysite was processed at 600 °C and then by acid leaching with HCl solutions of different concentrations, i.e. 0.5, 3 and 5 N (H600-xN; x = 0.5, 3 or 5). The resulting materials underwent chemical, textural, and laser diffraction analyses and were used in crystal violet (CV) adsorption. Bath experiments were conducted to evaluate the parameters influencing adsorption. A hydrophobicity study by adsorption of water/toluene and a spectroscopic investigation by FTIR and Raman were conducted, to understand the interaction mechanism. The affinity for CV is as follows: H600-0.5N (115 m²g^-1) > H600-3N (434 m²g^-1) > H600-5N (503 m²g^-1) > H600-0N (61 m²g^-1). The maximum adsorption of H600-0.5N would be explained by optimal hydrophilic and hydrophobic properties. Dealumination leads to the creation of more silanols responsible for hydrophilicity. Dehydroxylation at 600 °C combined with dealumination would induce a partial transformation of silanols into siloxanes which are responsible for organophilicity. The CV-H600-0.5N interaction implies two mechanisms: hydrophobic interactions and hydrogen bond. This study focused on hydrophobic interaction as a non-negligible component governing the interaction of organic contaminants with 1:1 clay minerals, while it was not sufficiently considered in the scientific literature.

A review on adsorptive removal of dyes from wastewater by hydroxyapatite nanocomposites

Dye removal from wastewater is of prominence due to its hostile effects on human health and the environment. The complex structure of the dye molecule is responsible for its difficulty in removal. Adsorption is found to be a promising technique to eliminate dye wastes due to its high removal capacity at low concentration. Among different adsorbents used, hydroxyapatite is a biocompatible adsorbent that is relatively efficient in both anionic and cationic dye removal. Recently, modification of hydroxyapatite by doping with other materials to increase its removal efficiency has gained much attention. This review summarizes compilation of recent literature on the removal of anionic and cationic dye by different hydroxyapatite nanocomposites, comparison of adsorption capacities of different hydroxyapatite nanocomposites, the possible adsorption mechanism of removal of dyes, the general isotherm, and kinetic and thermodynamic studies explaining the type of adsorption and the characteristics, advantages, and limitations of adsorbents.

Removal of Acid Red 88 Using Activated Carbon Produced from Pomelo Peels by KOH Activation: Orthogonal Experiment, Isotherm, and Kinetic Studies

Activated carbon (PPAC) from pomelo peels was prepared by carbonization and KOH activation. The performance of PPAC was assessed by removing acid red 88 (AR88) in aqueous solution. The most suitable activation processes were found by orthogonal experiments, aimed to achieve the maximum of removal capacity of AR88. Moreover, the possible mechanisms of adsorption were studied through the results of characterization, isotherm fitting, and kinetics simulation. Results showed the preparation parameter that mattered the most to AR88 removal efficiency was the activation temperature of PPAC, followed by impregnation ratio and activation time. The optimal preparation conditions of PPAC were at activation temperature 800°C, activation time 90 min, and impregnation ratio 2.5 : 1. The characterization results showed optimal PPAC had a microporous and amorphous carbon structure whose BET specific area and total pore volume were 2504 m2/g and 1.185 cm3/g, respectively. The isotherm fitting demonstrated that the sorption process followed the Langmuir model, and theoretical maximal sorption value was 1486 mg/g. The kinetics simulation showed that the pseudo-second-order model described the sorption behavior better, suggesting chemisorption seemed to be the rate-limiting step in the adsorption process. This work presented that PPAC was a promising and efficient adsorbent for AR88 from water.

Novel citric acid-functionalized brown algae with a high removal efficiency of crystal violet dye from colored wastewaters: insights into equilibrium, adsorption mechanism, and reusability

Synthetic dye waste is one of the world's key ecological concerns. The algal biomass has emerged as a promising alternative adsorbent for wastewater treatment. The present study deals with the functionalization of brown algae (BA) by citric acid in order to improve its adsorption ability for textile dye removal in aqueous solutions. The morphological texture (SEM and BET) and surface chemistry (FTIR, EDS-mapping, and PZC) of the novel functionalized brown algae (designated as BA-CA) were analyzed. The performance of BA-CA for crystal violet (CV) dye removal from wastewater was investigated. The isotherm and kinetic adsorption modeling indicate the good fit of Langmuir isotherm and pseudo-second-order models. Optimum monolayer uptake capacity was 279.14 mg/g for BA-CA, which was about two times higher than that of unmodified BA. The thermodynamic parameters clearly indicated that CV removal process was physiosorption, exothermic, and spontaneous in nature. The regeneration study showed excellent reusability of the BA-CA up to five cycles. Overall, the experimental findings lead us to conclude that the BA-CA can be used as an eco-friendly, cost-effective and easily regenerated adsorbent for the purification of textile effluents.

Synthesis and characterization of Ethiopian kaolin for the removal of basic yellow (BY 28) dye from aqueous solution as a potential adsorbent

In the present research, the kaolin adsorbents (beneficiated, raw powder, and calcined) were prepared from Ethiopian natural kaolin through mechanical, wet, and thermal processes. The geochemical and surface properties of kaolin adsorbent were characterized using FTIR, SEM/EDS, XRD, and XRF. In the batch experiment, basic operation parameters (initial dye concentrations, pH, temperature, contact time, and adsorbent dosage) were examined. Percentage removal efficiency basic yellow 28 (BY28) dye were recorded as 94.79%, 92.08%, and 87.08% onto beneficiated, raw, and calcined kaolin absorbents, respectively at an initial dye concentration of 20 mg/L, solution pH of 9, the temperature of 30 °C°C , and contact time of 60 min and adsorbent dosage of 1g/100L. The molar ratio of SiO2/Al2O3 was recorded as 2.911 Percent mass composition of Ethiopian kaolin which is higher than the expected pure kaolinite standard which allows us to classify the kaolin clay as a siliceous one. The calculated values of Δ G 0 for beneficiated adsorbent are -1.243, 1.576, and 4.396 kJ/mol at 303.15, 323.15, and 343.15 K, respectively for 20 mg/L of dye concentration and solution pH of 9, suggests that the thermodynamic behavior at lowest temperature is more feasible and spontaneous as compared with the higher temperature one. A similar fashion was calculated for raw and calcined adsorbents. The negative values of ΔHo and ΔS° suggest that the adsorption phenomenon is exothermic and the adsorbate molecules are organized on the solid phase in a more disordered fashion than the liquid phase. The pseudo-first-order and pseudo-second-order models have been used to describe the kinetics in the adsorption processes. The Pseudo-second-order model has been fitted for the BY 28 dye adsorption in the studied concentration range. The adsorption of BY 28 dye for raw and calcined adsorbents follows the Langmuir isotherm and the Freundlich isotherm fitted for the beneficiated adsorbent. The amount of BY28 dye taken up by beneficiated, raw, and calcined kaolin adsorbents was found as 1.896, 1.842, and 1.742 mg/g, respectively at a contact time of 1.0 h, the adsorbent dosage of 1.0 g, initial dye concentration = 20 mg/L and solution pH = 9 at 30 °C. The results found that these raw and prepared local kaolin adsorbents have a capacity as low-cost alternatives for the removal of dyes in industrial wastewater.

Magnetic metal organic framework for pre-concentration of ampicillin from cow milk samples

The aim of this study is a present of a simple solvothermal synthesis approach to preparation of Cu-based magnetic metal organic framework (MMOF) and subsequently its application as sorbent for ultrasound assisted magnetic solid phase extraction (UAMSPE) of ampicillin (AMP) from cow milk samples prior to high performance liquid chromatography-Ultraviolet (HPLC-UV) determination. Characteristics of prepared MMOF were fully investigated by different techniques which showed the exclusive properties of proposed sorbent in terms of proper functionality, desirable magnetic property and also high specific surface area. Different influential factors on extraction recovery including sorbent dosage, ultrasonic time, washing solvent volume and eluent solvent volume were assessed using central composite design (CCD) based response surface methodology (RSM) as an operative and powerful optimization tool. This is the first report for determination of AMP using MMOF. The proposed method addressed some drawbacks of other methods and sorbents for determination of AMP. The presented method decreases the extraction time (4 min) and also enhances adsorption capacity (250 mg/g). Moreover, the magnetic property of presented sorbent (15 emu/g) accelerates the extraction process which does not need filtration, centrifuge and precipitation procedures. Under the optimized conditions, the proposed method is applicable for linear range of 1.0–5000.0 μg/L with detection limit of 0.29 μg/L, satisfactory recoveries (≥95.0%) and acceptable repeatability (RSD less than 4.0%). The present study indicates highly promising perspectives of MMOF for highly effective analysis of AMP in complicated matrices.

•

MMOF was prepared and used for the first time for determination of ampicillin from cow milk samples.

•

The extraction method was convenient, rapid and the MMOF can be used more than 8 times.

•

The MMOF have high specific surface area (300.0 m²/g) and high adsorption capacity (250.5 mg g⁻¹).

•

The separation time was only 5 min, which was much shorter than other reported.