Influence of Re and Ru doping on the structural, optical and photocatalytic properties of nanocrystalline TiO2

Three-Phase Mixed Titania Powder Modified by Silver and Silver Chloride with Enhanced Photocatalytic Activity under UV-Visible Light

Pure and Ag/AgCl-modified titania powders with anatase/rutile/brookite three-phase mixed structure were prepared by one-step hydrothermal method. The effects of Ag/Ti atomic percentages on the structure and photocatalytic performance of TiO₂ were investigated. The results showed that pure TiO₂ consisted of three phases, anatase, rutile, and brookite, and that Ag addition promoted the transformation from anatase to rutile. When the molar ratio of Ag/Ti reached 4%, the AgCl phase appeared. The addition of Ag had little effect on the optical absorption of TiO₂; however, it did favor the separation of photogenerated electrons and holes. The results of photocatalytic experiments showed that after Ag addition, the degradation degree of rhodamine B (RhB) was enhanced. When the molar ratio of Ag/Ti was 4%, Ag/AgCl-modified TiO₂ exhibited the highest activity, and the first-order reaction rate constant was 1.67 times higher than that of pure TiO₂.

Effects of Hydrothermal Time on Structure and Photocatalytic Property of Titanium Dioxide for Degradation of Rhodamine B and Tetracycline Hydrochloride

Using butyl titanate and absolute ethanol as raw materials, TiO2 was prepared by a hydrothermal method with different hydrothermal times, and the influences of hydrothermal time on the structure and photocatalytic performance of TiO2 were investigated. The obtained samples were characterized by XRD, SEM, TEM, BET, PL and DRS, separately. The results show that TiO2 forms anatase when the hydrothermal time is 12 h, forms a mixed crystal composed of anatase and rutile when the hydrothermal time is 24 h, and forms rutile when the hydrothermal time is 36 h. With the extension of hydrothermal time, anatase gradually transforms into rutile and the surface area decreases. Although TiO2-24 h and TiO2-36 h show lower photoinduced charge recombination and higher light source utilization, TiO2-12 h exhibits the highest photocatalytic activity owing to its largest surface area (145.3 m2/g). The degradation degree of rhodamine B and tetracycline hydrochloride reach 99.6% and 90.0% after 45 min.

Impact of Fe, Mn co-doping in titanate nanowires photocatalytic performance for emergent organic pollutants removal

The unexpected incorporation of ionic Mn and Fe in the crystalline structure of titanate nanowires was accomplished when a contaminated a titanium source was used. The presence of Mn (8.1 mg L^-1) and Fe (4.3 mg L^-1) result in the production of a novel co-doped (Fe,Mn) titanate nanowires (TNW) material with improved optical and photocatalytic properties. After structural characterization, the results indicate that both Mn and Fe were incorporated in the TNW structure by replacement of Na⁺ in the interlayers, together with Ti⁴⁺ substitution in the TiO₆ octahedra. The potential of this new material to be used for pollutants photocatalytic degradation was further investigated. The terephthalic acid was used as probe molecule to first evaluate the catalytic ability of the pristine and FeMnTNW modified powders for the photo-assisted hydroxyl radical formation. Afterwards, the degradation process of a model emergent pollutant, caffeine, was studied. The results showed that FeMnTNW was the best photocatalyst, with the complete caffeine removal (20 mg L^-1) within 60 min of radiation (13 mg catalyst/L solution). The action of several oxidant species, including h⁺, OH^• and O₂^•-, during caffeine removal was carefully analyzed using specific radical scavengers. A mechanism for the charge-transfer in irradiated FeMnTNW particles, including the possibility of a photo-Fenton and photodegradation combination process, is proposed and discussed.

A comparative study on emergent pollutants photo-assisted degradation using ruthenium modified titanate nanotubes and nanowires as catalysts

Several methods have been used to tailor nanomaterials structure and properties. Sometimes, slight changes in the structure outcomes expressive improvements in the optical and photocatalytic properties of semiconductor nanoparticles. In this context, the influence of the metal doping and the morphology on a catalyst performance was studied in this work. Here, ruthenium doped titanate nanotubes (RuTNT) were synthesised for the first time using an amorphous Ru-containing precursor. Afterwards, the photocatalytic performance of this sample was compared to the one obtained for ruthenium titanate nanowires (RuTNW), recently reported. Two samples, RuTNW and RuTNT, were produced using the same Ru-containing precursor but distinct hydrothermal methodologies. The powders were structural, morphological and optical characterized by X-ray diffraction and fluorescence, transmission electron microscopy, Raman, X-ray photoelectron and photoluminescence spectroscopies. Distinct variations on the structural and optical properties of the RuTNT and RuTNW nanoparticles, due to ruthenium incorporation were observed. Their potential use as photocatalysts was evaluated on the hydroxyl radical photo-assisted production. Both samples were catalytic for this reaction, presenting better performances than the pristine counterparts, being RuTNT the best photocatalyst. Subsequently, the degradation of two emergent pollutants, caffeine and sulfamethazine, was studied. RuTNT demonstrated to be better photocatalyst than RuTNW for caffeine but identical performances were obtained for sulfamethazine. For both catalysts, the degradation mechanism of the pollutants was explored through the identification and quantification of the intermediate compounds produced and several differences were found. This indicates the importance of the structural and morphological aspects of a material on its catalytic performance.