Investigation of growth mechanism for highly oriented TiO2 nanorods: the role of reaction time and annealing temperature

Tailoring Interface via Tuning the Phase and Morphology of TiO2 for Efficient Mesoporous Perovskite Solar Cells

The efficiency of mesoporous perovskite solar cells (mp-PSCs) is significantly influenced by favorable charge transport properties across their various interfaces. The interfaces involving compact-TiO2, mesoporous electron transport layer (ETL), and perovskite layer are particularly vital for high-performing devices. Our study presents a combined experimental and computational approach, specifically employing density functional theory, to explore the impact of mesoporous-ETL/perovskite interface properties on carrier transport. These properties are examined in relation to the phases and morphologies of the mesoporous layer. Different phases of TiO2, including anatase, rutile, and brookite, and various morphologies such as nanocubes, nanorods, and disks/clusters, were synthesized using a simple hydrothermal synthesis route. They constitute the mesoporous layer, and Cs0.05FA0.84MA0.14PbI2.55Br0.45 is used as the perovskite absorber in mp-PSCs. The performance of the resulting mesoporous-TiO2 (mp-TiO2) device was investigated in relation to the different phases and morphologies of mp-TiO2. The mp-PSCs with the anatase phase as the mesoporous ETL exhibited the highest device parameters, including power conversion efficiency of 19.15%, short-circuit current density of 22.55 mA/cm2, fill factor of 76.50%, and open-circuit voltage of 1.11 V. The superior performance of the anatase structure is attributed to its promising band edge alignment, which results from a small negative conduction band offset compared to other phases, thereby enhancing carrier transport. This study underscores the potential of interface optimization to improve device performance. By investigating the device performance across different phases and morphologies of the mp-TiO2 layer, we can pave the way for the design of next-generation energy devices.

Interfacial band offset engineering with barium-doping towards enhanced performance of all inorganic CsPbI2Br perovskite solar cells

This study investigates the incorporation of Ba2+ at a low concentration into CsPbI2Br, resulting in the formation of mixed CsPb1-xBaxI2Br perovskite films. Photovoltaic devices utilizing these Ba-doped CsPbI2Br (Ba-CsPbI2Br) perovskite films achieved a higher stabilized power conversion efficiency of 14.07% compared to 11.60% for pure CsPbI2Br films. First-principles density functional theory calculations indicate that the improved device performance can be attributed to the efficient transport of conduction electrons across the interface between Ba-CsPbI2Br and the TiO2 electron transporting layer (ETL). The Ba-CsPbI2Br/TiO2 interface exhibits a type-II staggered band alignment with a smaller conduction band offset (CBO) of 0.25 eV, in contrast to the CsPbI2Br/TiO2 interface with a CBO of 0.48 eV. The reduced CBO at the Ba-CsPbI2Br/TiO2 interface diminishes the barrier for conduction electrons to transfer from the Ba-CsPbI2Br layer to the TiO2 layer, facilitating efficient charge transport.

TiO2 nanoflower photocatalysts: Synthesis, modifications and applications in wastewater treatment for removal of emerging organic pollutants

Titanium dioxide (TiO₂) has been considered as one of the most promising photocatalysts nanomaterials and is being used in a variety of fields of energy and environment under sunlight irradiation via photocatalysis. Highly efficient photocatalytic materials require the design of the proper structure with excellent morphology, interfacial structures, optical and surface properties, etc. Which are the key points to realize effective light-harvesting for photocatalytic applications. Hierarchical TiO₂ based nanoflower structures (i.e., 3D nanostructures) possess such characteristics and have attracted much attention in recent years. The uniqueness of TiO₂ nanoflowers (NFs) with a coarse texture and arranged structures demonstrates higher photocatalytic activity. This review deals with the hydrothermal synthesis of 3D TiO₂ NFs and effect of shape/size as well as various key synthesis parameters to improve their optoelectronic and photocatalytic properties. Furthermore, to improve their photocatalytic properties, various strategies such as doping engineering and heterojunction/nanocomposite formation with other functional nanomaterials have been discussed followed by their potential applications in photocatalytic degradation of various emerging pollutants discharged into the wastewater from various sources. Importance of such 3D nanoarchitecutres and future research in other fields of current interest in environments are discussed.

Atomically-thin Schottky-like photo-electrocatalytic cross-flow membrane reactors for ultrafast remediation of persistent organic pollutants

The remediation of persistent organic pollutants in surface and ground water represents a major environmental challenge worldwide. Conventional physico-chemical techniques do not efficiently remove such persistent organic pollutants and new remediation techniques are therefore required. Photo-electro catalytic membranes represent an emerging solution that can combine photocatalytic and electrocatalytic degradation of contaminants along with molecular sieving. Herein, macro-porous photo-electro catalytic membranes were prepared using conductive and porous stainless steel metal membranes decorated with nano coatings of semiconductor photocatalytic metal oxides (TiO₂ and ZnO) via atomic layer deposition, producing highly conformal and stable coatings. The metal - semiconductor junction between the stainless steel membranes and photocatalysts provides Schottky - like characteristics to the coated membranes. The PEC membranes showed induced hydrophilicity from the nano-coatings and enhanced electro-chemical properties due to the Schottky junction. A high electron transfer rate was also induced in the coated membranes as the photocurrent efficiency increased by 4 times. The photo-electrocatalytic efficiency of the TiO₂ and ZnO coated membranes were demonstrated in batch and cross flow filtration reactors for the degradation of persistent organic pollutant solution, offering increased degradation kinetic factors by 2.9 and 2.3 compared to photocatalysis and electrocatalysis, respectively. The recombination of photo-induced electron and hole pairs is mitigated during the photo-electrocatalytic process, resulting in an enhanced catalytic performance. The strategy offers outstanding perspectives to design stimuli-responsive membrane materials able to sieve and degrade simultaneously toxic contaminants towards greater process integration and self-cleaning operations.

A recyclable graphene/Ag/TiO2 SERS substrate with high stability and reproducibility for detection of dye molecules

Magnetron sputtering combined with the wet chemical transfer of graphene successfully prepared a multilayer composite material and an efficient photocatalytic renewable SERS substrate. It has excellent photocatalytic activity against dye molecules.