Graphitic carbon nitride nanoplatelets incorporated titania based type-II heterostructure and its enhanced performance in photoelectrocatalytic water splitting

Two-Dimensional Layered Heterojunctions for Photoelectrocatalysis

Two-dimensional (2D) layered nanomaterial heterostructures, arising from the combination of 2D materials with other low-dimensional species, feature a large surface area to volume ratio, which provides a high density of active sites for catalytic applications and for (photo)electrocatalysis (PEC). Meanwhile, their electronic band structure and high electrical conductivity enable efficient charge transfer (CT) between the active material and the substrate, which is essential for catalytic activity. In recent years, researchers have demonstrated the potential of a range of 2D material interfaces, such as graphene, graphitic carbon nitride (g-C3N4), metal chalcogenides (MCs), and MXenes, for (photo)electrocatalytic applications. For instance, MCs such as MoS2 and WS2 have shown excellent catalytic activity for hydrogen evolution, while graphene and MXenes have been used for the reduction of carbon dioxide to higher value chemicals. However, despite their great potential, there are still major challenges that need to be addressed to fully realize the potential of 2D materials for PEC. For example, their stability under harsh reaction conditions, as well as their scalability for large-scale production are important factors to be considered. Generating heterojunctions (HJs) by combining 2D layered structures with other nanomaterials is a promising method to improve the photoelectrocatalytic properties of the former. In this review, we inspect thoroughly the recent literature, to demonstrate the significant potential that arises from utilizing 2D layered heterostructures in PEC processes across a broad spectrum of applications, from energy conversion and storage to environmental remediation. With the ongoing research and development, it is likely that the potential of these materials will be fully expressed in the near future.

Influence of oxygen vacancies, surface composition, and crystallite size on the photoelectrochemical oxidation activity of C,N-codoped TiO2 for cefadroxil abatement along with O3

This study aims the development of photoelectrodes to be incorporated in a photoelectrocatalytic ozonation (PECO) process for tertiary treatment of urban wastewaters, targeting the removal of contaminants of emerging concern (CEC). PECO tests were performed using urban wastewater after secondary treatment fortified with Cefadroxil (CFX, C16H17N3O5S), as target model CEC. Three Nitrogen and Carbon doped TiO2 (CN-TiO2) electrodes were synthesized by anodizing at 50, 70, and 90 V, and calcined. These materials were characterized by X-Ray diffraction and Rietveld refinement, Scanning Electron Microscopy, Diffuse Reflectance Spectroscopy, X-ray photoelectron spectroscopy, chronoamperometry, and electrochemical impedance spectroscopy, to correlate defects with photoactivity. All photoanodes considerably reduced their main bandgaps by the incorporation of C and N species, to enable absorption capacities in the UV region using a Xe lamp. The lowest oxygen vacancy content and largest crystallite size were found for CN-TiO2-70, favoring the reduction of bulk defects that could act as recombination of charge carriers. Therefore, oxygen vacancies affect more the TiO2 photoactivity compared to the crystallite size or the light absorption capacity, confirming that a lower content of vacancies in the material bulk and surface doping significantly influence the activity as detected by Rietveld refinement, DRS, and XPS. The electrochemical techniques confirm that the highest photocurrent was obtained for CN-TiO2-70, whence this photoanode was chosen to carry out the CFX degradation. A point defect model simulating Nyquist plot reveals that the photoactivity depends on the speed to diffuse oxygen vacancies through the TiO2 coating. All abatement processes were followed by high-performance liquid chromatography, and Total Organic Carbon (TOC). At neutral and alkaline conditions, CFX is eliminated to levels below the analytical detection limit after 90 min of treatment (TOC removals of 87 and 91%, respectively), indicating that the coupling between the CN-TiO2-70 photocatalyst and ozone is effective in eliminating the contaminant due to parallel routes forming •OH species. Lower CFX degradation observed at acidic pH (TOC removal of 70%) is assigned to the difficulty of oxidizing protonated CFX species.

Novel visible-light-active P-g-CN-based α-Bi2O3/WO3 ternary photocatalysts with a dual Z-scheme heterostructure for the efficient decomposition of refractory ultraviolet filters and environmental hormones: Benzophenones

The ubiquitous and refractory benzophenone (BP)-type ultraviolet filters, which are also endocrine disruptors, were commonly detected in the aquatic matrix and could not be efficiently removed by conventional wastewater treatment processes, thus causing extensive concern. Herein, a novel ternary nanocomposite, P-g-CN/α-Bi2O3/WO3 (P-gBW), was successfully fabricated by mixing cocalcinated components and applied to the decomposition of BP-type ultraviolet filters. The dual-Z-scheme heterostructure of P-gBW enhances visible-light absorption, efficiently facilitates separation and mobility, and prolongs the lifetime of photoinduced charge carriers via double charge transfer mechanisms. The optimum 95 wt% P-gBW exhibited excellent photocatalytic activity, degrading 96% 4-hydroxy benzophenone (4HBP) within 150 min and 93% 2,2',4,4'-tetrahydroxybenzophenone (BP-2) within 100 min under visible-light illumination, respectively. The pseudo-first-order rate constant of 4HBP (1.15 h-1) was 6.8-, 3.1-, 3.3- and 2.2-fold higher than those of WO3, P-g-CN, α-Bi2O3, and P-g-CN/α-Bi2O3, respectively, while that of BP-2 (1.71 h-1) was 5.2-, 2.2-, 3.2- and 1.5-fold higher, respectively. The improved photocatalytic degradation was attributed to efficient photoinduced charge carrier separation and migration and prevented the recombination of electron holes, as verified by photoluminescence, transient photocurrent response, and electrochemical impedance spectroscopy. Trapping experiments, electron paramagnetic resonance, and band energy position indicated an efficient dual-Z-scheme heterostructure.

Catalytic evaluation and in vitro bacterial inactivation of graphitic carbon nitride/carbon sphere doped bismuth oxide quantum dots with evidential in silico analysis

Herein, Bi2O3 quantum dots (QDs) have been synthesized and doped with various concentrations of graphitic carbon nitride (g-C3N4) and a fixed amount of carbon spheres (CS) using a co-precipitation technique. XRD analysis confirmed the presence of monoclinic structure along the space group P21/c and C2/c. Various functional groups and characteristic peaks of (Bi-O) were identified using FTIR spectra. QDs morphology of Bi2O3 showed agglomeration with higher amounts of g-C3N4 by TEM analysis. HR-TEM determined the variation in the d-spacing which increased with increasing dopants. These doping agents were employed to reduce the exciting recombination rate of Bi2O3 QDs by providing more active sites which enhance antibacterial activity. Notably, (6 wt%) g-C3N4/CS-doped Bi2O3 exhibited considerable antimicrobial potential in opposition to E. coli at higher values of concentrations relative to ciprofloxacin. The (3 wt%) g-C3N4/CS-doped Bi2O3 exhibits the highest catalytic potential (97.67%) against RhB in a neutral medium. The compound g-C3N4/CS-Bi2O3 has been suggested as a potential inhibitor of β-lactamaseE. coli and DNA gyraseE. coli based on the findings of a molecular docking study that was in better agreement with in vitro bactericidal activity.

Composite of graphitic carbon nitride and TiO2 as photo-electro-catalyst in microbial fuel cell

The widespread application of surfactants and their subsequent discharge in the receiving water bodies is a very common issue in developing countries. In the present investigation, a composite of graphitic carbon nitride (GCN) and TiO₂ was used as a photo-electro-catalyst in a microbial fuel cell (MFC)-based hybrid system for bio-electricity production and simultaneous pollutant removal (organic matter and sodium dodecyl sulphate, SDS). The GCN: TiO₂ composite with a ratio of 70:30 (by wt. %) revealed a better electrochemical response; thus, it was used as a photo-electro-catalyst in MFC. Additionally, the photochemical characterization indicated a decrease in the band gap and charge recombination of GCN-TiO₂ composite compared to standalone TiO₂, which indicated a conducive effect of GCN addition. Further, on the actual use as a photo-electro-catalyst, the GCN-TiO₂ catalysed MFC attained 58.2 ± 9.6% and 86.5 ± 7.1% of COD and SDS removal; while simultaneously harvesting a maximum power density of 1.07 W m^-3, which was higher than standalone TiO₂-catalysed MFC. The follow-up treatment in the charcoal bio-filter and photo-cathodic chamber of the hybrid system further improved the overall COD and SDS removal efficiency to 92.1 ± 2.7 and 95.6 ± 1.5%, respectively. The electro-catalytic performance of the GCN-TiO₂ can be attributed to the presence of nitrogen-active species in the composite. The results of this investigation demonstrated a potential MFC-based hybrid system for the simultaneous secondary and tertiary treatment of municipal wastewater. Consequently, the outcome of this investigation indicates an innovative research direction in the field of photo-electro-catalyst, which can fit into the role of a photo-catalyst as well as an electro-catalyst.

A robust electrochemical sensor based on N,S-FeNi3/C for simultaneous detection of hydroquinone and arbutin in cosmetics

For practical analysis and simultaneous detection of arbutin (AR) and hydrochinone (HQ) in cosmetics, an electrochemical sensor has been designed based on nitrogen and sulfur co-doped Fe-Ni alloy (N,S-FeNi₃/C) nanoparticles. The N,S-FeNi₃/C has been prepared for the first time via hydrothermal synthesis and high-temperature carbonization. N,S-FeNi₃/C not only improves the charge transfer to the surface, but also provides rich active sites and fast ion diffusion rates owing to the iron and nickel bimetallic materials. In addition, the d-band structure of transition metals (nickel and iron) introduced by the N and S atoms exhibits an electronic structure similar to that of noble metal catalysts, thus enhancing electrocatalytic activity and increasing conductivity. Additionally, the double doping of S and N atoms significantly increases the active sites of carbon atoms; thus, N-S-FeNi3/C exhibits excellent electrochemical catalytic activity for the oxidation of AR and HQ. Further, the N,S-FeNi₃/C sensor is used for the simultaneous determination of HQ and AR by square-wave pulse voltammetry. Distinct oxidation peaks of HQ and AR are observed at potentials of +0.028 V and +0.352 V (vs. SCE). The electrical signal increases linearly in the HQ concentration ranges of 0.1-100 μM and 0.05-70 μM for the simultaneous determination of AR and HQ with a detection limit as low as 0.0476 and 0.0135 μM (S/N = 3), respectively. Thus, rapid and accurate detection of AR and HQ in spiked cosmetics is successfully achieved, with a recovery ranging from 96.4 to 104.2%, and the relative standard deviation is lower than 3.8-4.0%.

Facile synthesis of broom stick like FeOCl/g-C3N5 nanocomposite as novel Z-scheme photocatalysts for rapid degradation of pollutants

A simple and cost-effective route has been utilized for the preparation of a novel lamellar structured FeOCl/g-C₃N₅ nanocomposite as Z-scheme photocatalyst. The preparation method was performed under the ambient temperature conditions without any hazardous chemicals. Various characterization techniques, namely XRD, FESEM, TEM, FT-IR, UV-Vis, DRS, and PL were carried out to analyse the nanocomposite for confirmation of FeOCl/g-C₃N₅ nanocomposite. To evaluate its and visible light degradation performances tetracycline (T-C) was used as target pollutant. Among the optimum loading for the g-C₃N₅ incorporated FeOCl binary nanocomposites, the g-C₃N₅/FeOCl exhibited a superlative degradation performance toward the T-C antibiotic pollutant. The results confirmed that 95% of T-C was degraded within 40 min under photodegradation mechanism. The improved photodegradation performance in degradation of T-C was mainly due to the reduction in electron-hole recombination, broadening in the light absorption by g-C₃N₅ incorporation, which leads to shortening the degradation time. Furthermore, the hydroxyl and superoxide radicals played a major role in the photodegradation process and the possible mechanism was elucidated and proposed. The present work implies a novel, sustainable, and efficient Z-scheme system that may deliver a convenient method for environment remediation.

Facile construction of S-scheme SnO2/g-C3N4 photocatalyst for improved photoactivity

The SnO2/g-C3N4 composites were fabricated via an annealing mixture of g-C3N4 and SnO2, which were obtained from calcinating melamine and hydrothermal treatment of SnCl₄ solution, respectively. The photocatalytic properties of g-C3N4/SnO2 were studied over the degradation of Rhodamine B (RhB) under visible light, which exhibits a significantly improved photocatalytic activity compared to the single components, g-C3N4 and SnO2. The enhancement in photocatalytic activity of SnO2/g-C3N4 could be described by the S-scheme pathway, in which the effective charge transfer between components is demonstrated toward the suppression in recombination of the photogenerated electron-hole pairs within redox potential conservation. Besides, a new criterion, photochemical space-time yield, was applied to evaluate the photocatalytic performance of our samples.

Construction of a double heterojunction between graphite carbon nitride and anatase TiO2 with co-exposed (101) and (001) faces for enhanced photocatalytic degradation

This study aimed to promote the separation of photogenerated carriers and improve the redox performance of graphite carbon nitride (g-C₃N₄) by synthesizing a double-heterojunction-structure photocatalyst, g-C₃N₄/(101)-(001)-TiO₂, through the solvothermal method. The photocatalyst comprised a Z-system formed from g-C₃N₄ and the (101) plane of TiO₂, as well as a surface heterojunction formed from the (101) and (001) planes of TiO₂. The results showed that g-C₃N₄/(101)-(001)-TiO₂ had strong photocatalytic activity and stable performance in the photodegradation of paracetamol. The active species ·O₂⁻ and ·OH were found to play important roles in the photocatalytic degradation of paracetamol through a radical-quenching experiment. The charge-transfer mechanism was also described in detail. Overall, this work provided a new strategy for the Z-system heterojunction and opened up the application of this structure in the degradation of organic pollutants.

A double-heterojunction-structure photocatalyst g-C₃N₄/(101)-(001)-TiO₂ with Z-system and surface heterojunction, was synthesized, which can effectively promote the separation of photogenerated e⁻–h⁺ pairs and the degradation of organic pollutants.

Construction of heterostructure based on hierarchical Bi2MoO6 and g-C3N4 with ease for impressive performance in photoelectrocatalytic water splitting and supercapacitor

This work demonstrates the formation of g-C₃N₄/Bi₂MoO₆ heterostructure for water splitting and supercapacitor; which shows highest PEC efficiency and symmetric device delivered a energy density and power density of 47 W h kg⁻¹ and 4.5 kW kg⁻¹.