Preparation of nanoparticles of silver halides, superconductors and magnetic materials using water-in-oil microemulsions as nano-reactors

Polymeric Surfactant (PIBSA-X) Facilitates the Formation of a Water-in-Oil Emulsion Reactor for the Preparation of Ultrasmall Nanosilica

Despite the widespread application of ultrasmall nanosilica, solving its aggregation problem during the preparation process remains a challenge. In this paper, ultrasmall nanosilica with a controllable size and aggregates were prepared through the water-in-oil (W/O) emulsion method by using polyisobutylene succinic anhydride-type polymeric surfactants (PIBSA-X) as an isolating agent. PIBSA-X polymeric surfactants with different hydrophilic groups were prepared using industrial-grade PIBSA, which can form stable W/O-type emulsions well. Subsequently, the W/O-type emulsion droplets were used as reactors and tetraethyl orthosilicate was hydrolyzed under ammonia alkaline conditions to synthesize ultrasmall nanosilica (10 nm). Furthermore, the morphological evolution of nanosilica aggregates can be tuned by varying the oil/water ratio, which controls the emulsion droplets. A possible mechanism is proposed to explain why the emulsion method approach affords nanosilica aggregates with various morphologies and pellet size in water-in-oil (W/O-type) emulsion droplets. This study provides a precise and simple synthetic method for the development of ultrasmall nanosilica, which has good potential to be industrialized.

Magnetically-assisted viral transduction (magnetofection) medical applications: An update

Gene therapy involves replacing a faulty gene or adding a new gene inside the body's cells to cure disease or improve the body's ability to fight disease. Its popularity is evident from emerging concepts such as CRISPR-based genome editing and epigenetic studies and has been moved to a clinical setting. The strategy for therapeutic gene design includes; suppressing the expression of pathogenic genes, enhancing necessary protein production, and stimulating the immune system, which can be incorporated into both viral and non-viral gene vectors. Although non-viral gene delivery provides a safer platform, it suffers from an inefficient rate of gene transfection, which means a few genes could be successfully transfected and expressed within the cells. Incorporating nucleic acids into the viruses and using these viral vectors to infect cells increases gene transfection efficiency. Consequently, more cells will respond, more genes will be expressed, and sustained and successful gene therapy can be achieved. Combining nanoparticles (NPs) and nucleic acids protects genetic materials from enzymatic degradation. Furthermore, the vectors can be transferred faster, facilitating cell attachment and cellular uptake. Magnetically assisted viral transduction (magnetofection) enhances gene therapy efficiency by mixing magnetic nanoparticles (MNPs) with gene vectors and exerting a magnetic field to guide a significant number of vectors directly onto the cells. This research critically reviews the MNPs and the physiochemical properties needed to assemble an appropriate magnetic viral vector, discussing cellular hurdles and attitudes toward overcoming these barriers to reach clinical gene therapy perspectives. We focus on the studies conducted on the various applications of magnetic viral vectors in cancer therapies, regenerative medicine, tissue engineering, cell sorting, and virus isolation.

Plant Extract Based on Deep Eutectic Solvent-Mediated Biosynthesis of Silver Nanoparticles: Cytotoxicity and Antibacterial Effects

Deep eutectic solvent DES-based grape pomace extracts (GPE) were used to synthesize silver nanoparticles (AgNPs) for the first time. This paper presents a synthesis of AgNPs by a novel method with GPE obtained by an eco-friendly "green" solvent, namely, betaine-lactic acid and proline-lactic acid DESs. Compared with the water-based GPE, the DES-based grape pomace extracts contain lower reducing powers but additionally act as capping agent, which is the more important property for the creation of necessary particle nanosize and dispersion with colloidal stability. DESs were synthesized using a heating method, and Fourier transform infrared spectroscopy (FTIR) was carried out to confirm the formation of the DES. The phytochemical profile of GPE exhibits a high amount of hydroxycinnamic acids (23%), followed by anthocyanins (19%). The silver nanoparticles with a round shape were noticed on the scanning electron microscopy micrographs with the particle size in the range of 10-20 nm. The disc diffusion technique (DDT) showed that the AgNPs exhibited significant antibacterial activity against Gram-negative bacteria Escherichia coli (E. coli) UKM В-906 and Gram-positivespore-formingBacillus subtilis (B. subtilis) UCМ В-506T. Mitotic index (MI) and chromosomal aberrations (CAs) were assessed by A. cepa assay. The synthesized silver nanoparticles do not induce cytogenotoxic and genotoxic changes in Allium cepa L. with nanoparticles at concentrations up to 10%.

Research Progress of FeSe-based Superconductors Containing Ammonia/Organic Molecules Intercalation

As an important part of Fe-based superconductors, FeSe-based superconductors have become a hot field in condensed matter physics. The exploration and preparation of such superconducting materials form the basis of studying their physical properties. With the help of various alkali/alkaline-earth/rare-earth metals, different kinds of ammonia/organic molecules have been intercalated into the FeSe layer to form a large number of FeSe-based superconductors with diverse structures and different layer spacing. Metal cations can effectively provide carriers to the superconducting FeSe layer, thus significantly increasing the superconducting transition temperature. The orientation of organic molecules often plays an important role in structural modification and can be used to fine-tune superconductivity. This review introduces the crystal structures and superconducting properties of several typical FeSe-based superconductors containing ammonia/organic molecules intercalation discovered in recent years, and the effects of FeSe layer spacing and superconducting transition temperature are briefly summarized.

The Many "Facets" of Halide Ions in the Chemistry of Colloidal Inorganic Nanocrystals

Over the years, scientists have identified various synthetic "handles" while developing wet chemical protocols for achieving a high level of shape and compositional complexity in colloidal nanomaterials. Halide ions have emerged as one such handle which serve as important surface active species that regulate nanocrystal (NC) growth and concomitant physicochemical properties. Halide ions affect the NC growth kinetics through several means, including selective binding on crystal facets, complexation with the precursors, and oxidative etching. On the other hand, their presence on the surfaces of semiconducting NCs stimulates interesting changes in the intrinsic electronic structure and interparticle communication in the NC solids eventually assembled from them. Then again, halide ions also induce optoelectronic tunability in NCs where they form part of the core, through sheer composition variation. In this review, we describe these roles of halide ions in the growth of nanostructures and the physical changes introduced by them and thereafter demonstrate the commonality of these effects across different classes of nanomaterials.

Small-angle X-ray scattering study on nano-scale structures controlled by water content in a binary water/ionic liquid system

We report the water-in-ionic-liquid microemulsions (ME) formed in a binary water/ionic liquid system, without organic solvents, using a surfactant ionic liquid (SAIL) based on 1-butyl-3-methylimidazolium (C4mIm+) as the cation and dioctyl sulfosuccinate (AOT-) as the anion. Small-angle X-ray scattering (SAXS) revealed that MEs were stably formed in the binary water/SAIL solutions in the low water content region (water volume fraction, φw < 0.1), and the ME size systematically increased with increasing φw. We further investigated the nanostructures of the high φw region using a combination of SAXS and rheological measurements and found that the MEs changed to a stacked lamellar structure comprising SAIL bilayers and water phases at φw > 0.12. At the largest water content, φw = 0.99, vesicle structures were obtained.

Solution-phase synthesis of transition metal oxide nanocrystals: Morphologies, formulae, and mechanisms

In this review, we provide a broad overview of solution-phase synthesis of transition metal oxide nanocrystals (NCs), including a substantial catalog of published methods, and a unifying classification and discussion. Prevalent subcategories of solution-phase synthesis are delineated and general features are summarized. The diverse morphologies achievable by solution-phase synthesis are defined and exemplified. This is followed by sequential consideration of the solution-phase synthesis of first-row transition metal oxides. The common oxides of Ti, V, Mn, Fe, Co, Ni, Cu, and Zn are introduced; major crystal lattices are presented and illustrated; representative examples are explained; and numerous synthesis formulae are tabulated. Following this presentation of experimental studies, we present an introduction to theories of NC nucleation and growth. Various models of NC nucleation and growth are addressed, and important concepts determining the growth and structure of colloidal NCs are explained. Overall, this review provides an entry into systematic understanding of solution-phase synthesis of nanocrystals, with a reasonably comprehensive survey of results for the important category of transition metal oxide NCs.

A review of finite size effects in quasi-zero dimensional superconductors

Quantum confinement and surface effects (SEs) dramatically modify most solid state phenomena as one approaches the nanometer scale, and superconductivity is no exception. Though we may expect significant modifications from bulk superconducting properties when the system dimensions become smaller than the characteristic length scales for bulk superconductors-such as the coherence length or the penetration depth-it is now established that there is a third length scale which ultimately determines the critical size at which Cooper pairing is destroyed. In quasi-zero-dimensional (0D) superconductors (e.g. nanocrystalline materials, isolated or embedded nanoparticles), one may define a critical particle diameter below which the mean energy level spacing arising from quantum confinement becomes equal to the bulk superconducting energy gap. The so-called Anderson criterion provides a remarkably accurate estimate of the limiting size for the destabilization of superconductivity in nanosystems. This review of size effects in quasi-0D superconductors is organized as follows. A general summary of size effects in nanostructured superconductors (section 1) is followed by a brief overview of their synthesis (section 2) and characterization using a variety of techniques (section 3). Section 4 reviews the size-evolution of important superconducting parameters-the transition temperature, critical fields and critical current-as the Anderson limit is approached from above. We then discuss the effect of thermodynamic fluctuations (section 5), which become significant in confined systems. Improvements in fabrication methods and the increasing feasibility of addressing individual nanoparticles using scanning probe techniques have lately opened up new directions in the study of nanoscale superconductivity. Section 6 reviews both experimental and theoretical aspects of the recently discovered phenomena of 'parity effect' and 'shell effect' that lead to a strong, non-monotonic size dependence of the superconducting energy gap and associated properties. Finally, we discuss in section 7 the properties of ordered heterostructures (bilayers and multilayers of alternating superconducting and normal phases) and disordered heterostructures (nanocomposites consisting of superconducting and normal phases), which are primarily controlled by the proximity effect.

Water-in-ionic liquid microemulsion formation in solvent mixture of aprotic and protic imidazolium-based ionic liquids

We report that water-in-ionic liquid microemulsions (MEs) are stably formed in an organic solvent-free system, i.e., a mixture of aprotic (aIL) and protic (pIL) imidazolium-based ionic liquids (ILs) containing the anionic surfactant dioctyl sulfosuccinate sodium salt (AOT). Structural investigations using dynamic light, small-angle X-ray, and small-angle neutron scatterings were performed for MEs formed in mixtures of aprotic 1-octyl-3-methylimidazolium ([C8mIm(+)]) and protic 1-alkylimidazolium ([CnImH(+)], n = 4 or 8) IL with a common anion, bis(trifluoromethanesulfonyl)amide ([TFSA(-)]). It was found that the ME structure strongly depends on the mixing composition of the aIL/pIL in the medium. The ME size appreciably increases with increasing pIL content in both [C8mIm(+)][TFSA(-)]/[C8ImH(+)][TFSA(-)] and [C8mIm(+)][TFSA(-)]/[C4ImH(+)][TFSA(-)] mixtures. The size is larger for the n = 8 system than that for the n = 4 system. These results indicate that the shell part of MEs is composed of both AOT and pIL cation, and the ME size can be tuned by pIL content in the aIL/pIL mixtures.

Synthesis, Characterization, and Magnetic Studies ofα-Fe2O3Nanoparticles

Very fine nanosized metal oxide, namely, iron oxide (α-Fe2O3) has been synthesized by precipitation method using ammonia as precipitating agent and characterized by using XRD (X-ray diffraction), TGA/DTA, surface area measurement, transmission electron microscopy (TEM), and magnetic measurements techniques. XRD studies show that iron oxide was formed asα-Fe2O3instead of the commonly formed magnetite nanoparticles (Fe3O4) or a mixture of magnetite (Fe3O4) and maghemite (γ-Fe2O3, cubic), and it has rhombohedral structure. Magnetic measurements showed that iron oxide has five unpaired electrons and is ferromagnetic in nature, Ms value being 1.7 emu/g. The particle size of the synthesized iron oxide was determined by TEM. TEM images show that the size of particles of Fe2O3varied from 15 nm to 49 nm with average crystallite size 35 nm.

Liquid crystalline thermotropic and lyotropic nanohybrids

This review is meant to give the reader an insight into hybrids incorporating different types of nanoparticles, e.g. metallic or metal oxides, within different types of lyotropic and thermotropic liquid crystals, from relatively small calamitic molecules to the larger discotics and polymers. In particular, this review highlights the importance of nanoparticle-liquid crystal interactions in accessing hybrid materials that exhibit synergetic properties.

Ordered Porous Nanomaterials: The Merit of Small

This paper will introduce the reader to some of the “classical” and “new” families of ordered porous materials which have arisen throughout the past decades and/or years. From what is perhaps the best-known family of zeolites, which even now to this day is under constant research, to the exciting new family of hierarchical porous materials, the number of strategies, structures, porous textures, and potential applications grows with every passing day. We will attempt to put these new families into perspective from a synthetic and applied point of view in order to give the reader as broad a perspective as possible into these exciting materials.

Individual inorganic nanoparticles: preparation, functionalization and in vitro biomedical diagnostic applications

Inorganic nanoparticles have become the focus of modern materials science due to their potential technological importance, particularly in bionanotechnology, which stems from their unique physical properties including size-dependent optical, magnetic, electronic, and catalytic properties. The present article provides an overview on the currently used individual inorganic nanoparticles for in vitro biomedical domains. These inorganic nanoparticles include iron oxides, gold, silver, silica, quantum dots (QDs) and second harmonic generation (SHG) particles. For each of these interesting nanoparticles, the main issues starting from preparation up to bio-related applications are presented.

A review on the synthesis of TiO2 nanoparticles by solution route

TiO2 can be prepared in the form of powder, crystals, or thin films. Liquid-phase processing is one of the most convenient and utilized methods of synthesis. It has the advantage of allowing control over the stoichiometry, production of homogeneous materials, formation of complex shapes, and preparation of composite materials. However, there may be some disadvantages such as expensive precursors, long processing times, and the presence of carbon as an impurity. In comparison, the physical production techniques, although environment friendly, are limited by the size of the produced samples which is not sufficient for a large-scale production. The most commonly used solution routes in the synthesis of TiO2 are reviewed.

Mechanism of YF3 nanoparticle formation in reverse micelles

This article reports an investigation of the mechanism of YF(3) nanoparticle formation in two variants of the reverse microemulsion precipitation method. These two variants involve the addition of F(-), either as a microemulsion or directly as an aqueous solution, to Y(3+) dispersed in nonionic reverse micelles. The two methods yield amorphous and single-crystal nanoparticles, respectively. The kinetics of reagent mixing are studied by (19)F NMR and colorimetric model reactions, and the particle growth is monitored by TEM. Mixing and nucleation are shown to occur within seconds to minutes whereas particle growth continues for 4 to 48 h, depending on the particle type. Moreover, the growth rate remains constant during most of the growth period, indicating that Ostwald ripening is the most probable growth mechanism. The single-emulsion method also produces a minority amorphous population that exhibits significantly different growth kinetics, attributed to a coagulation mechanism. Secondary growth experiments, involving the addition of precursor ions to mature particles, have been conducted to evaluate the relative importance of nucleation and the competitive growth of existing particle populations. The key differences between the two methods reside in the nucleation step. In the case of the classical method, nucleation occurs upon intermicellar collisions and under conditions of comparable concentrations of Y(3+) and F(-). This method generates more numerous stable nuclei and smaller particles. In the single-microemulsion method, nucleation occurs in the presence of excess F(-) through the interaction of Y(3+)-containing micelles with microdroplets of aqueous F(-). These conditions lead to the formation of crystalline particles and a wider size distribution of unstable nuclei.

New methodology for obtaining CdTe quantum dots by using ultrasound

Luminescent CdTe quantum dots (Qdots) have been produced at few minutes by using a new, simple and fast methodology in an aqueous medium by using ultrasound irradiation to accelerate the process of tellurium reduction. The structural and optical properties were characterized by TEM, XRD, absorption and fluorescence spectrocopy. The produced Qdots are in a strong quantum confinement regime and have only one fluorescence band. Moreover, the nanoparticles seem to be monodispersed, which is in accordance with the fluorescence results. We have developed a simple route for preparing monodispersed CdTe Qdots in an aqueous media. The use of ultrasound allows the morphology to be better controlled and the surfaces defects of Qdots to be reduced.

Surfactant Effects on Microemulsion-Based Nanoparticle Synthesis

The effect of the surfactant on the size, polydispersity, type of size distribution and structure of nanoparticles synthesized in microemulsions has been studied by computer simulation. The model simulates the surfactant by means of two parameters: the intermicellar exchange parameter, k_ex, related to dimer life time, and film flexibility parameter, f, related to interdroplet channel size. One can conclude that an increase in surfactant flexibility leads to bigger and polydisperse nanoparticle sizes. In addition, at high concentrations, the same reaction gives rise to a unimodal distribution using a flexible surfactant, and a bimodal distribution using a rigid one. In relation to bimetallic nanoparticles, if the nanoparticle is composed of two metals with a moderate difference in reduction potentials, increasing the surfactant flexibility modifies the nanoparticle structure, giving rise to a transition from a nanoalloy (using a rigid film) to a core-shell structure (using a flexible one).

Radiolytic syntheses of nanoparticles in supramolecular assemblies

Ionizing radiation is a powerful method in the syntheses of nanoparticles (NPs). The application of ionizing radiation in supramolecular assemblies can afford us more unique conditions to control the composition and morphology of the NPs. So far, most work focused on water-in-oil (W/O) microemulsions or reversed micelles. In this supramolecular organization, it has been proved that the effects of many conditions on the yield of e(aq)(-) play a key role, remarkably different from the mechanism in routine chemical method. Besides, some supramolecular assemblies of cyclodextrins and ionic liquids have been used in the syntheses of NPs by ionizing radiation, and many novel and interesting phenomena appeared. This review is intended to underline the three significant aspects of the radiolytic syntheses of NPs in supramolecular assemblies.

Lattice Monte Carlo simulation of semiconductor nanocrystal synthesis in microemulsion droplets

A lattice Monte Carlo model has been developed to describe the formation of a single semiconductor nanocrystal (quantum dot) inside a droplet of a microemulsion. The motivation stems from the need to understand the kinetics of quantum dot formation in microemulsion templates with minimal droplet-droplet coalescence. In these systems, a fixed amount of a reactant is dissolved in each droplet, and another reactant is supplied by diffusion through the interface. Nucleation is facilitated by a spontaneous reaction between the precursors at the droplet interface, and the coalescence of nuclei and clusters ultimately leads to the formation of a single particle. The size of the final particle is controlled by the concentration of the first reactant. A hard-sphere potential is used to describe cluster-cluster interactions. The overall particle formation time initially increases with final particle size, quickly passes through a maximum, and subsequently decreases due to the formation of large intermediate clusters apparently acting as effective collision partners to smaller ones. Studies of the evolution of intermediate cluster sizes provided mechanistic details of the final particle formation through cluster-cluster coalescence. A generalized dimensionless equation is obtained that relates the formation time of the final particle to its size for various droplet sizes and diffusivities of the first reactant and clusters. A parametric study reveals that the final particle formation time is more sensitive to changes in the cluster-cluster coalescence probability than in the probability of nucleation.