Stabilization of detergent-solubilized Ca2+-ATPase by poly(ethylene glycol)

Quality assessment of recombinant proteins by infrared spectroscopy. Characterisation of a protein aggregation related band of the Ca2+-ATPase

FTIR spectroscopy detects aggregates of recombinantly produced protein and can therefore be used for quality control.

The effect of Mg2+ on cardiac muscle function: Is CaATP the substrate for priming myofibril cross-bridge formation and Ca2+ reuptake by the sarcoplasmic reticulum?

Kinetics are established for the activation of the myofibril from the relaxed state [Smith, Dixon, Kirschenlohr, Grace, Metcalfe and Vandenberg (2000) Biochem. J. 346, 393-402]. These require two troponin Ca2+-binding sites, one for each myosin head, to act as a single unit in initial cross-bridge formation. This defines the first, or activating, ATPase reaction, as distinct from the further activity of the enzyme that continues when a cross-bridge to actin is already established. The pairing of myosin heads to act as one unit suggests a possible alternating mechanism for muscle action. A large positive inotropic (contraction-intensifying) effect of loading the Mg2+ chelator citrate, via its acetoxymethyl ester, into the heart has confirmed the competitive inhibition of the Ca2+ activation by Mg2+, previously seen in vitro. In the absence of a recognized second Ca2+ binding site on the myofibril, with appropriate binding properties, the bound ATP is proposed as the second activating Ca2+-binding site. As ATP, free or bound to protein, can bind either Mg2+ or Ca2+, this leads to competitive inhibition by Mg2+. Published physico-chemical studies on skeletal muscle have shown that CaATP is potentially a more effective substrate than MgATP for cross-bridge formation. The above considerations allow calculation of the observed variation of fractional activation by Ca2+ as a function of [Mg2+] and in turn reveal simple Michaelis-Menten kinetics for the activation of the ATPase by sub-millimolar [Mg2+]. Furthermore the ability of bound ATP to bind either cation, and the much better promotion of cross-bridge formation by CaATP binding, give rise to the observed variation of the Hill coefficient for Ca2+ activation with altered [Mg2+]. The inclusion of CaADP within the initiating cross-bridge and replacement by MgADP during the second cycle is consistent with the observed fall in the rate of the myofibril ATPase that occurs after two phosphates are released. The similarity of the kinetics of the cardiac sarcoplasmic reticulum ATPase to those of the myofibril, in particular the positive co-operativity of both Mg2+ inhibition and Ca2+ activation, leads to the conclusion that this ATPase also has an initiation step that utilizes CaATP. The first-order activation by sub-millimolar [Mg2+], similar to that of the myofibril, may be explained by Mg2+ involvement in the phosphate-release step of the ATPase. The inhibition of both the myofibril and sarcoplasmic reticulum Ca2+ transporting ATPases by Mg2+ offers an explanation for the specific requirement for phosphocreatine (PCr) for full activity of both enzymes in situ and its effect on their apparent affinities for ATP. This explanation is based on the slow diffusion of Mg2+ within the myofibril and on the contrast of PCr with both ATP and phosphoenolpyruvate, in that PCr does not bind Mg2+ under physiological conditions, whereas both the other two bind it more tightly than the products of their hydrolysis do. The switch to supply of energy by diffusion of MgATP into the myofibril when depletion of PCr raises [ATP]/[PCr] greatly, e.g. during anoxia, results in a local [Mg2+] increase, which inhibits the ATPase. It is possible that mechanisms similar to those described above occur in skeletal muscle but the Ca2+ co-operativity involved would be masked by the presence of two Ca2+ binding sites on each troponin.

Kinetic characterization of the perturbation by dodecylmaltoside of sarcoplasmic reticulum Ca(2+)-ATPase

We investigated the functional aspects of the interaction between the sarcoplasmic reticulum (SR) membranous Ca(2+)-ATPase and the non-ionic detergent dodecylmaltoside, using detergent concentrations allowing perturbation of the membrane but not its solubilization. At pH 7.5, the effects of dodecylmaltoside on ATPase activity and delipidation had previously been shown to resemble, in some respects, those of octa(ethylene glycol) monododecylether (C12E8), an appropriate detergent for ATPase studies. Our aim here was to explore the specific effects of dodecylmaltoside on the different steps in the ATPase catalytic cycle, which may owe their specificity to the difference between the polar head groups of dodecylmaltoside and C12E8. This was done at 20 degrees C, both at pH 6 in the absence of KCl and at pH 7.5 in the presence of 100 mM KCl, two conditions under which the characteristics of unperturbed ATPase have already been well defined. Preliminary estimation of dodecylmaltoside partition between water and SR membranes at pH 6 yielded a partition coefficient K close to 4 x 10(5) (ratio of the molar fraction of dodecylmaltoside in the lipid to that in the aqueous phase at a low detergent concentration, assuming that most of this detergent was present in the lipid phase). At near saturation of SR membranes, bound dodecylmaltoside was roughly equimolar with the constituent phospholipids. Non-solubilizing concentrations of dodecylmaltoside inhibited SR ATPase activity by up to 65-70% at pH 7.5, but not at pH 6, unlike the results of similar experiments with C12E8. The rates of the four main steps in the ATPase catalytic cycle were measured by fast kinetic techniques; they were similarly modified at both pH. Dodecylmaltoside slowed down both the rate of calcium-saturated ATPase phosphorylation and the rate of ATPase isomerization after phosphorylation, two steps which were not targets of perturbation by C12E8. The slowing down of the isomerization step by dodecylmaltoside might well explain why it inhibited overall ATPase activity at pH 7.5. In contrast to C12E8, dodecylmaltoside did not affect the dephosphorylation step, which was the main target of inhibition by C12E8 and the main rate-limiting step at pH 6. However, like C12E8, dodecylmaltoside accelerated the calcium binding-induced transition of nonphosphorylated ATPase. Another striking feature of the perturbation induced by dodecylmaltoside was that it significantly altered the binding of 45Ca2+ to the ATPase and the corresponding conformational changes. At pCa 5-5.5, it almost halved calcium binding to the ATPase but ATPase phosphorylation was unimpaired.(ABSTRACT TRUNCATED AT 400 WORDS)

Steric exclusion is the principal source of the preferential hydration of proteins in the presence of polyethylene glycols

The preferential interactions of bovine serum albumin, lysozyme, chymotrypsinogen, ribonuclease A, and beta-lactoglobulin with polyethylene glycols (PEGs) of molecular weight 200-6,000 have been measured by dialysis equilibrium coupled with high precision densimetry. All the proteins were found to be preferentially hydrated in all the PEGs, and the magnitude of the preferential hydration increased with increasing PEG size for each protein. The change in the chemical potentials of the proteins with the addition of the PEGs had highly positive values, indicating a strong thermodynamic destabilization of the system by the PEGs. A viscosity study of the PEGs showed them to be randomly coiled polymers, as their radii of gyration were related to the molecular weight by Rg = aM0.55. The thickness of the effective shell impenetrable to PEG around protein molecules, calculated from the preferential hydration, was found to vary with PEG molecular weight in similar fashion as the PEG radius of gyration, supporting the proposal (Arakawa, T. & Timasheff, S.N., 1985a, Biochemistry 24, 6756-6762) that the preferential exclusion of PEGs from proteins is due principally to the steric exclusion of PEG from the protein domain, although favorable interactions with protein surface residues, in particular nonpolar ones, may compete with the exclusion. These thermodynamically unfavorable preferential exclusion interactions lead to the action of PEGs as precipitants, although they may destabilize protein structure at higher temperatures.

Effects of solutes on the formation of crystalline sheets of the Ca(2+)-ATPase in detergent-solubilized sarcoplasmic reticulum

The Ca(2+)-ATPase crystals formed in detergent solubilized sarcoplasmic reticulum (SR) at 2 degrees C in a crystallization medium of 0.1 M KCl, 10 mM K-Mops (pH 6.0), 3 mM MgCl2, 3 mM NaN3, 5 mM DTT, 25 IU/ml Trasylol, 2 micrograms/ml 1,6-di-tert-butyl-p-cresol, 20% glycerol and 20 mM CaCl2 (J. Biol. Chem. 263, 5277 and 5287 (1988)) contain highly ordered sheets of ATPase molecules, that associate into large multilamellar stacks (greater than 100 layers). When the crystallization is performed in the same medium but in the presence of 40% glycerol at low temperature the stacking is reduced to 4-5 layers and the average diameter of the crystalline sheets is increased from less than 1 micron to 2-3 microns. Glycerol and low temperature presumably reduce stacking by interfering with the interactions between the hydrophilic headgroups of Ca(2+)-ATPase molecules in adjacent lamellae, while not affecting or promoting the ordering of ATPase molecules within the individual sheets. Electron diffraction patterns could be regularly obtained at 8 A and occasionally at 7 A resolution on crystals formed in 40% glycerol, either at 2 degrees C or at -70 degrees C. In the same media but in the absence of glycerol, polyethyleneglycol 1450, 3000 and 8000 (1-8%) induced the formation of ordered crystalline arrays containing 10-12 layers that were similar to those obtained in 40% glycerol. Replacement of 40% glycerol with 10-50% glucose or supplementation of the standard crystallization medium with polyethyleneglycol (PEG 3000 or 8000; 1, 2, 5 and 8%) had no beneficial effect on the order of crystalline arrays compared with media containing 40% glycerol.

On the effect of lysophosphatidylcholine, platelet activating factor and other surfactants on calcium permeability in sarcoplasmic reticulum vesicles

The effect of low concentrations of lysophosphatidylcholine (LPC), platelet-activating factor (PAF) and other surfactants (Triton X-100, C12E8, sodium dodecyl sulfate, sodium cholate and sodium deoxycholate) on membrane permeability of native sarcoplasmic reticulum vesicles and sarcoplasmic reticulum lipid vesicles, has been studied. Triton X-100, C12E8, sodium dodecyl sulfate, sodium cholate and sodium deoxycholate were all able to permeabilize membranes at concentrations of surfactants below their critical micellar concentration (CMC) in both lipid and native vesicles, being the K0.5 of calcium release from native vesicles lower than that from lipid vesicles. The values of these K0.5 were well correlated with the corresponding CMC values for each type of membrane. However, both LPC and PAF behaved in a different way since, although they induced permeabilization of the native vesicles at values of K0.5 close to their CMC, their K0.5 values for permeabilizing vesicles, prepared by using lipids extracted from sarcoplasmic reticulum, were much higher than their corresponding CMC.