Asymmetric black membranes formed by one monolayer of bipolar lipids at the air/water interface

Membrane-spanning lipids for an uncompromised monitoring of membrane fusion and intermembrane lipid transfer

A Förster resonance energy transfer-based fusion and transfer assay was developed to study, in model membranes, protein-mediated membrane fusion and intermembrane lipid transfer of fluorescent sphingolipid analogs. For this assay, it became necessary to apply labeled reporter molecules that are resistant to spontaneous as well as protein-mediated intermembrane transfer. The novelty of this assay is the use of nonextractable fluorescent membrane-spanning bipolar lipids. Starting from the tetraether lipid caldarchaeol, we synthesized fluorescent analogs with fluorophores at both polar ends. In addition, we synthesized radioactive glycosylated caldarchaeols. These labeled lipids were shown to stretch through bilayer membranes rather than to loop within a single lipid layer of liposomes. More important, the membrane-spanning lipids (MSLs) in contrast to phosphoglycerides proved to be nonextractable by proteins. We could show that the GM2 activator protein (GM2AP) is promiscuous with respect to glycero- and sphingolipid transfer. Saposin (Sap) B also transferred sphingolipids albeit with kinetics different from GM2AP. In addition, we could unambiguously show that the recombinant activator protein Sap C x His6 induced membrane fusion rather than intermembrane lipid transfer. These findings showed that these novel MSLs, in contrast with fluorescent phosphoglycerolipids, are well suited for an uncompromised monitoring of membrane fusion and intermembrane lipid transfer.

Design, fabrication, and characterization of archaeal tetraether free-standing planar membranes in a PDMS- and PCB-based fluidic platform

The polar lipid fraction E (PLFE) isolated from the thermoacidophilic archaeon Sulfolobus acidocaldarius contains exclusively bipolar tetraether lipids, which are able to form extraordinarily stable vesicular membranes against a number of chemical, physical, and mechanical stressors. PLFE liposomes have thus been considered appealing biomaterials holding great promise for biotechnology applications such as drug delivery and biosensing. Here we demonstrated that PLFE can also form free-standing "planar" membranes on micropores (∼100 μm) of polydimethylsiloxane (PDMS) thin films embedded in printed circuit board (PCB)-based fluidics. To build this device, two novel approaches were employed: (i) an S1813 sacrificial layer was used to facilitate the fabrication of the PDMS thin film, and (ii) oxygen plasma treatment was utilized to conveniently bond the PDMS thin film to the PCB board and the PDMS fluidic chamber. Using electrochemical impedance spectroscopy, we found that the dielectric properties of PLFE planar membranes suspended on the PDMS films are distinctly different from those obtained from diester lipid and triblock copolymer membranes. In addition to resistance (R) and capacitance (C) that were commonly seen in all the membranes examined, PLFE planar membranes showed an inductance (L) component. Furthermore, PLFE planar membranes displayed a relatively large membrane resistance, suggesting that, among the membranes examined, PLFE planar membrane would be a better matrix for studying channel proteins and transmembrane events. PLFE planar membranes also exhibited a sharp decrease in phase angle with the frequency of the input AC signal at ∼1 MHz, which could be utilized to develop sensors for monitoring PLFE membrane integrity in fluidics. Since the stability of free-standing planar lipid membranes increases with increasing membrane packing tightness and PLFE lipid membranes are more tightly packed than those made of diester lipids, PLFE free-standing planar membranes are expected to be considerably stable. All these salient features make PLFE planar membranes particularly attractive for model studies of channel proteins and transmembrane events and for high-throughput drug screening and artificial photosynthesis. This work can be extended to nanopores of PDMS thin films in microfluidics and eventually aid in membrane-based new lab-on-a-chip applications.

Archaeal lipids and their biotechnological applications

The lipids of Archaea, based on glycerol isopranoid ethers, can be used taxonomically to distinguish between phenotypic subgroups of the domain to delineate them clearly from all other organisms. This review is a general survey of the structural features of archaeal lipids and how they relate to survival in the harsh environments in which the Archaea live. The molecular organization of archaeal lipids in monolayers, artificial black membranes and vesicles and the unique properties and possible biotechnological applications of liposomes of the lipids are presented. The results with these liposomes are compared with similar data obtained with synthetic compounds which mimic the structure of archaeal lipids. Studies on computer simulation are also reported.

Archaebacterial bipolar tetraether lipids: Physico-chemical and membrane properties

Bipolar tetraether lipids (BTL) are abundant in archaea and can be chemically synthesized. The structures of BTL are distinctly different from the lipids found in bacteria and eukaryotes. In aqueous solution, BTL can form extraordinarily stable liposomes with different sizes, lamellarities and membrane packing densities. BTL liposomes can serve as membrane models for understanding the structure-function relationship of the plasma membrane in thermoacidophiles and can be used for technological applications. This article reviews the separation, characterization and structures of BTL as well as the physical properties and technological applications of BTL liposomes. One of the structural features of BTL is the presence of cyclopentane rings in the lipid hydrocarbon core. Archaea use the cyclopentane ring as an adaptation strategy to cope with high growth temperature. Special attention of this article is focused on how the number of cyclopentane rings varies with environmental factors and affects membrane properties.

Lipid-based nanoparticles as pharmaceutical drug carriers: from concepts to clinic

In recent years, various nanotechnology platforms in the area of medical biology, including both diagnostics and therapy, have gained remarkable attention. Moreover, research and development of engineered multifunctional nanoparticles as pharmaceutical drug carriers have spurred exponential growth in applications to medicine in the last decade. Design principles of these nanoparticles, including nanoemulsions, dendrimers, nano-gold, liposomes, drug-carrier conjugates, antibody-drug complexes, and magnetic nanoparticles, are primarily based on unique assemblies of synthetic, natural, or biological components, including but not limited to synthetic polymers, metal ions, oils, and lipids as their building blocks. However, the potential success of these particles in the clinic relies on consideration of important parameters such as nanoparticle fabrication strategies, their physical properties, drug loading efficiencies, drug release potential, and, most importantly, minimum toxicity of the carrier itself. Among these, lipid-based nanoparticles bear the advantage of being the least toxic for in vivo applications, and significant progress has been made in the area of DNA/RNA and drug delivery using lipid-based nanoassemblies. In this review, we will primarily focus on the recent advances and updates on lipid-based nanoparticles for their projected applications in drug delivery. We begin with a review of current activities in the field of liposomes (the so-called honorary nanoparticles), and challenging issues of targeting and triggering will be discussed in detail. We will further describe nanoparticles derived from a novel class of amphipathic lipids called bolaamphiphiles with unique lipid assembly features that have been recently examined as drug/DNA delivery vehicles. Finally, an overview of an emerging novel class of particles (based on lipid components other than phospholipids), solid lipid nanoparticles and nanostructured lipid carriers will be presented. We conclude with a few examples of clinically successful formulations of currently available lipid-based nanoparticles.

Voltage clamp studies on S-layer-supported tetraether lipid membranes

Isolated subunits from the cell surface proteins (S-layer) of Bacillus coagulans E38-66 have been recrystallized on a glycerol dialkyl nonitol tetraether lipid (GDNT)-monolayer and the electrophysical features of this biomimetic membrane have been investigated in comparison to unsupported GDNT-monolayers. The GDNT-monolayer, spread on a Langmuir-Blodgett trough, was clamped with the tip of a glass patch pipette. In order to investigate the barrier function and potential to incorporate functional molecules, voltage-clamp examinations on plain and S-layer-supported GDNT-monolayers were per-formed. Our results indicate the formation of a tight GDNT-monolayer sealing the tip of the glass pipette, and a decrease in conductance of the GDNT-monolayer upon recrystallization of the S-layer protein. Thus, the S-layer protein, apparently, did not penetrate or rupture the lipid monolayer. The valinomycin-mediated increase in conductance was less pronounced for the S-layer-supported than for the plain GDNT-monolayer, indicating differences in the accessibility and/or in the fluidity of the lipid membranes. Furthermore. in contrast to plain GDNT-monolayers. S-layer supported GDNT-monolayers with high valinomycin-mediated conductance persisted over long, periods of time, indicating enhanced stability. These composite S-layer/lipid films may constitute a new tool for electrophysical and electrophysiological studies on membrane-associated and membrane-integrated biomolecules.

Interfacial air/water proton conduction from long distances by sulfolobus solfataricus archaeal bolaform lipids

The stability, structural organization, and the ability to transfer protons long distances have been investigated in monolayers formed from archael bolaform lipids at the air/water interface. The lipids employed were the fractions GroR2Gro (R represents an acyl group with variable chain length typically consisting of 0-4 cyclopentane rings and 40 isoprenoid residues) and GroR2GroNon-Ol (Non-ol represents nonitol) extracted from Sulfolobus solfataricus by hydrolysis of the cytoplasmic membrane. GroR2-GroNon-ol films exhibit a very peculiar behaviour: the monolayer surface pressure increases with time, regardless of its low or high initial value. This finding is related to the possibility of GroR2GroNon-ol molecules to assume an upright (a metastable) or a U-shaped (stable) configuration. In the gaseous state and in the collapsed state of the film, no lateral proton conduction was observed. However, in the pressure range 0 < pi < 25 mN/m for GroR2Gro and 0 < pi < 30 mN/m for GroR2GroNon-ol monolayers, a lateral proton conduction at the air/water interface was observed. The structural organization of these bipolar lipids at the air/water interface can be related to the lateral proton conduction; it is possible to conclude that whatever configuration these lipids may adopt, they are able to structure the air/water interface in a hydrogen bond network that supports lateral proton conduction. This process may be ascribed to a percolation phenomenon occurring when the polar lipid head groups form a structured lattice of hydrogen bonds.

Valinomycin acts as a channel in ultrathin lipid membranes

When the thickness of monolayer membranes formed by bolaform archaeal lipids is reduced to the approximate length of two valinomycin molecules, the zero-current conductance does not show any more a linear dependence on valinomycin concentration; instead, a quadratic behaviour is observed. This suggests that a dimer permeation pore is formed and therefore the conduction mechanism changes from carrier to channel.

Horizontal 'solvent-free' lipid bimolecular membranes with two-sided access can be formed and facilitate ion channel reconstitution

We present here an easily used method and apparatus for formation of horizontal 'solvent-free' lipid bilayer membranes affording two-sided access. These horizontal bilayers allow direct delivery of submicroliter volumes of samples onto the membrane upper surface increasing the efficacy of reconstitution by several orders of magnitude, as demonstrated using Staphylococcus aureus alpha-toxin. Also, they permit creation of locally high and transient transbilayer osmotic gradients to initiate fusion of ion-channel containing liposomes with planar membrane, which, following fusion, leaves the membrane and channel in essentially symmetric bathing solutions. This method is especially advantageous for cases where thickness of the membrane, absence of hydrocarbon solvent, or presence of differing lipid compositions in the two monolayers is critical.