Photodissociation of MgC60+ complexes generated and stored in a linear ion trap

Performance assessment of a portable mass spectrometer using a linear ion trap operated in non-scanning mode

RATIONALE

The desire for mass spectrometer portability provides the motivation for simpler, lighter electronics to deliver switched potentials applied to the electrodes of the linear ion trap operated in non-scanning mode. Using a novel method of modelling and theoretical analysis, we simulate the mass analyser performance under these unfavourable operating conditions.

METHODS

The electrical fields are simulated using the Charge Particle Optics software which employs the boundary element method. The ion trajectories are computed from the ion cage of the EI source to the interior of the trap where the ions are confined. The spatial/temporal ion distributions during injection are calculated from the individual ion trajectories computed with constant time-steps. Due to geometric non-linearities, β_y  = 0 lines close to the apex of the stability diagram have been computed for different initial positions with zero initial velocities in order to define the acceptable maximum axial extension.

RESULTS

The DC potential well depth has been estimated at about 15 eV from the axial velocity distribution, and the minimum time of ion injection at 120 μs from the temporal ion distribution. To ensure a mass separation of one unit and the confinement of the whole of the injected ions, buffer gas cooling is necessary to reduce the trajectory excursion amplitudes to 0.1 and 15 mm in the radial and axial directions, respectively.

CONCLUSIONS

The portable mass spectrometer is predicted to achieve a mass resolution of better than one mass unit providing that helium buffer gas is used. An additional cooling sequence has to be added prior to moving the operating point toward the apex. Copyright © 2016 John Wiley & Sons, Ltd.

Optical detection methods for mass spectrometry of macroions

Detection of macroions has been a challenge in the field of mass spectrometry. Conventional ionization-based detectors, relying on production and multiplication of secondary electrons, are restricted to detection for charged particles of m/z < 1 x 10(6). While both energy-sensitive and charge-sensitive detectors have been developed recently to overcome the limitation, they are not yet in common use. Photon-sensitive detectors are suggested to be an alternative, with which detection of macroions (or charged particles) by either elastic light scattering (ELS) or laser-induced fluorescence (LIF) has been possible. In this article, we provide a critical review on the developments of novel optical detection methods for mass spectrometry of macroions, including both micron-sized and nano-sized synthetic polymers as well as high-mass biomolecules. Design and development of new spectrometers making possible observations of the mass spectra of macroions with sizes in the range of 10-10(3) nm or masses in the range of 1-10(6) MDa are illustrated. The potential and promise of this optical approach toward macroion detection with high efficiency are discussed in practical aspects.

Mass analysis at the advent of the 21st century

There have been many new and exciting developments in mass spectrometer systems in recent years. Many of these developments are being driven by challenges presented by molecular biology. The activity is fueled by resources being devoted to drug development, for example, and other medically and biologically related activities. Progress in these applications will be accelerated by improved sensitivity, specificity, and speed. In mass spectrometry, this translates to greater mass resolving power, mass accuracy, mass-to-charge range, efficiency, and speed. It is safe to say that the demands resulting from current analytical needs are likely to be met to varying degrees but probably not by a single analyzer technology or hybrid instrument. On-line and/or off-line separations and manipulations combined with mass spectrometry will also play increasingly important roles. For any analyzer, or combination of analyzers, to become widely used it must have an important application for which its figures of merit are best suited, relative to competing approaches. The relative cost of competing technologies is also an important factor. The mass filter has seen so much use in the past 30 years because its characteristics best fit a wide range of applications. As an example, biological applications, which are currently driving many instrument development activities in mass spectrometry, demand more information, of higher quality, from less material, faster, and at lower cost. Which technologies will dominate biological applications in the coming years is open to speculation. However, in considering the relative merits of today's dominant mass analyzers, areas of opportunity for improvement are apparent. Furthermore, new and more demanding measurement needs are constantly being recognized that will continue to exercise the creativity of the mass spectrometry community.