Noble metal abundances in an Early Archean impact deposit

Origin of Silicate Spherules and Geochemistry of Re and Platinum-Group Elements Within Microfossil-Bearing Archean Chert from the 3.4 Ga Strelley Pool Formation, Western Australia

Silicate spherules have been identified from the ca. 3.4 Ga-old Strelley Pool Formation (SPF) in the Pilbara Craton, Western Australia. Their origins and geochemical characteristics, including the Re and platinum-group elements of their host clastic layer and the overlying and underlying microfossil-bearing finely laminated carbonaceous cherts, were examined. The spherules have various morphologies (completely spherical to angular), sizes (∼20 to >500 μm), textures (layered, non-layered, and fibrous), mineralogy (various proportions of microcrystalline quartz, sericite, anatase and Fe-oxides), and chemistry (enriched in Ni and/or Cr), commonly with thin anatase-rich walls. Their host clastic layer is characterized by rip-up clasts, suggesting a suddenly occurring high-energy depositional environment, such as tsunamis. Although various origins other than asteroid impact were considered, none could unequivocally explain the features of the spherules. In contrast, non-layered spherical spherules that occur as individual framework grains or collectively comprise angular-shaped rock fragments appear to be more consistent with the asteroid impact origin. The calculated Re-Os age of the cherts (3331 ± 220 Ma) was consistent with the established age of the SPF (3426-3350 Ma), suggesting that the Re-Os system was not significantly disturbed by later metamorphic and weathering events.

Impact structures in Africa: A review

More than 50 years of space and planetary exploration and concomitant studies of terrestrial impact structures have demonstrated that impact cratering has been a fundamental process - an essential part of planetary evolution - ever since the beginning of accretion and has played a major role in planetary evolution throughout the solar system and beyond. This not only pertains to the development of the planets but to evolution of life as well. The terrestrial impact record represents only a small fraction of the bombardment history that Earth experienced throughout its evolution. While remote sensing investigations of planetary surfaces provide essential information about surface evolution and surface processes, they do not provide the information required for understanding the ultra-high strain rate, high-pressure, and high-temperature impact process. Thus, hands-on investigations of rocks from terrestrial impact craters, shock experimentation for pressure and temperature calibration of impact-related deformation of rocks and minerals, as well as parameter studies pertaining to the physics and chemistry of cratering and ejecta formation and emplacement, and laboratory studies of impact-generated lithologies are mandatory tools. These, together with numerical modeling analysis of impact physics, form the backbone of impact cratering studies. Here, we review the current status of knowledge about impact cratering - and provide a detailed account of the African impact record, which has been expanded vastly since a first overview was published in 1994. No less than 19 confirmed impact structures, and one shatter cone occurrence without related impact crater are now known from Africa. In addition, a number of impact glass, tektite and spherule layer occurrences are known. The 49 sites with proposed, but not yet confirmed, possible impact structures contain at least a considerable number of structures that, from available information, hold the promise to be able to expand the African impact record drastically - provided the political conditions for safe ground-truthing will become available. The fact that 28 structures have also been shown to date NOT to be of impact origin further underpins the strong interest in impact in Africa. We hope that this review stimulates the education of students about impact cratering and the fundamental importance of this process for Earth - both for its biological and geological evolution. This work may provide a reference volume for those workers who would like to search for impact craters and their ejecta in Africa.

Early precambrian asteroid impact-triggered tsunami: excavated seabed, debris flows, exotic boulders, and turbulence features associated with 3.47-2.47 Ga-old asteroid impact fallout units, Pilbara Craton, Western Australia

Pioneering studies of Precambrian impact fallout units and associated tsunami deposits in the Hamersley Basin, Pilbara Craton, Western Australia, by B.M. Simonson and S.W. Hassler, document a range of tsunami deposits associated with impact fallout units whose impact connection is identified by associated microtektites and microkrystites (condensation spherules). The impact connection of these particles is demonstrated by iridium anomalies, unique platinum group elements patterns, and Ni-rich mineral phases. Densely packed tsunami-transported fragments and boulders overlie microkrystite units of the >2629 +/- 5 Ma top Jeerinah Impact Layer (JIL). Tsunami events closely follow spherule settling associated with the 2561 +/- 8 Ma Spherule Marker Bed SMB-1 and SMB-2 impact events, Bee Gorge Member, Wittenoom Formation. The two impact cycles are separated by a stratigraphically consistent silicified black siltstone, representing a "Quiet Interval." The SMB turbidites display turbulence eddies, climbing ripples, conglomerate pockets, slumps, and waterlogged sediment deformation features. Consequences of tsunami in the probably contemporaneous Carawine Dolomite (Pb-Pb carbonate ages of approximately 2.56-2.54 Ga), eastern Hamersley Basin, include sub-autochthonous below-wave base excavation and megabrecciation of sea floor substrata, resulting in a unique 10-30-m-thick spherule-bearing megabreccia marker mapped over a nearly 100-km north-south strike distance in the east Hamersley Basin. The field relations suggest a pretsunami settling of the bulk of the spherules. Tsunami wave effects include: (1). dispersal of the spherule-rich soft upper sea floor sediments as a subaqueous mud cloud and (2). excavation of consolidated substrata below the soft sediment zone. Excavation and megabrecciation included injection of liquefied spherule-bearing microbreccia into dilated fractures in the disrupted underlying carbonates. Near-perfect preservation of the spherules within the basal microbreccia veins suggests tsunami-induced hydraulic pressures locally exceeded lithostatic pressure. Late-stage settling of spherule-bearing mud clouds in the wake of the tsunami is represented by an abundance of spherules in the uppermost microbreccia zones of the megabreccia pile. From the deep below-wave base facies of the Carawine Dolomite, tsunami wave amplitudes may have exceeded 200 m depth. The approximately 2.47-2.50 Ga DGS4 (S4 Macroband, Dales Gorge Member, Brockman Iron Formation) fallout units include exotic chert and carbonate boulders transported by tsunami following settling of a 10-20-cm-thick microkrystite and microtektite-rich unit. Seismic perturbations preceding deposition of the JIL and SMB fallout units are marked by rip-up clasts. The geochemistry of microkrystites and microtektites suggests impact fallout originated from impacts in simatic/oceanic crustal regions, although tsunami waves may have originated from seismically reactivated faults and plate margins located at distance from the impact craters.

Petrographic criteria for recognizing certain types of impact spherules in well-preserved precambrian successions

Impact spherule layers in sedimentary successions can open a new window on large impacts to complement the better-known record of terrestrial craters. At least six spherule layers have been found in well-preserved late Archean to Paleoproterozoic strata, and a growing body of geochemical evidence indicates they are impact ejecta. The most distinctive characteristics of these impact spherules are: (1) a predominance of highly spherical grains; (2) the presence of grains with unusual shapes such as teardrops and dumbbells; (3) fibroradial aggregates of K-feldspar crystals nucleated on the edges of spherules; and (4) clear internal spots representing both cement-filled vesicles and replaced glass cores, which, in contrast to the nuclei of ooids and armored lapilli, are not always located in the centers of the spherules. These characteristics permit the reliable differentiation of these impact spherules from spheroidal particles of other origins, such as sedimentary ooids or volcanic accretionary lapilli, often with just a hand lens. However, petrographic identification becomes progressively more difficult as the spherules become smaller or more altered. Moreover, impact spherules in other layers of other ages sometimes have different textures, so the ones described here are not representative of all types of impact spherules. They are provided as a starting point for researchers interested in identifying impact spherule layers. Given the visible record of impacts on the Moon and the much greater mass of the Earth, there should be many more impact spherule layers on Earth than have been discovered to date.

Spherule beds 3.47-3.24 billion years old in the Barberton Greenstone Belt, South Africa: a record of large meteorite impacts and their influence on early crustal and biological evolution

Four layers, S1-S4, containing sand-sized spherical particles formed as a result of large meteorite impacts, occur in 3.47-3.24 Ga rocks of the Barberton Greenstone Belt, South Africa. Ir levels in S3 and S4 locally equal or exceed chondritic values but in other sections are at or only slightly above background. Most spherules are inferred to have formed by condensation of impact-produced rock vapor clouds, although some may represent ballistically ejected liquid droplets. Extreme Ir abundances and heterogeneity may reflect element fractionation during spherule formation, hydraulic fractionation during deposition, and/or diagenetic and metasomatic processes. Deposition of S1, S2, and S3 was widely influenced by waves and/or currents interpreted to represent impact-generated tsunamis, and S1 and S2 show multiple graded layers indicating the passage of two or more wave trains. These tsunamis may have promoted mixing within a globally stratified ocean, enriching surface waters in nutrients for biological communities. S2 and S3 mark the transition from the 300-million-year-long Onverwacht stage of predominantly basaltic and komatiitic volcanism to the late orogenic stage of greenstone belt evolution, suggesting that regional and possibly global tectonic reorganization resulted from these large impacts. These beds provide the oldest known direct record of terrestrial impacts and an opportunity to explore their influence on early life, crust, ocean, and atmosphere. The apparent presence of impact clusters at 3.26-3.24 Ga and approximately 2.65-2.5 Ga suggests either spikes in impact rates during the Archean or that the entire Archean was characterized by terrestrial impact rates above those currently estimated from the lunar cratering record.

Environmental consequences of impact cratering events as a function of ambient conditions on Earth

The end of the Mesozoic Era is defined by a dramatic floral and faunal turnover that has been linked with the Chicxulub impact event, thus leading to the realization that impact cratering can affect both the geologic and biologic evolution of Earth. However, the environmental consequences of an impact event and any subsequent biological effects rely on several factors, including the ambient environmental conditions and the extant ecosystem structures at the time of impact. Some of the severest environmental perturbations of the Chicxulub impact event would not have been significant in some periods of Earth history. Consequently, the environmental and biological effects of an impact event must be evaluated in the context in which it occurs.