The effects on function of distal-extension removable partial dentures as determined by occlusal rest position

Stress Distribution Pattern in Mini Dental Implant-Assisted RPD with Different Clasp Designs: 3D Finite Element Analysis

Introduction

The removable partial denture (RPD) components, especially the retentive arm, play a major role in the loading characteristic on supporting structures.

Objective

To evaluate and compare the effect of different clasp designs on the stress distribution pattern, maximum von Mises stress, and average hydrostatic pressure on abutment teeth, as well as edentulous ridges, mini dental implants (MDIs), and peri-implant bone between the conventional removable partial denture (CRPD) and mini dental implant-assisted distal extension removable partial denture (IARPD) using a three-dimensional finite element analysis (3D FEA).

Materials and Methods

3D FEA models of mandibular arches, with and without bilateral MDI at the second molar areas, and Kennedy class I RPD frameworks, with RPA, RPI, Akers, and no clasp component, were generated. A total of 200 N vertical load was bilaterally applied on both sides of distal extension areas, and the stress was analyzed by 3D FEA.

Results

The stress concentration of IARPD with RPI clasp design was located more lingually on abutment teeth, MDI, and peri-implant bone, while the other designs were observed distally on the supporting structures. The maximum von Mises stress on the abutment root surface was decreased when the RPDs were assisted with MDIs. The CRPD and IARPD with the Akers clasp design showed the highest von Mises stress followed by the designs with RPA and RPI clasp, respectively. The average hydrostatic pressure in each group was in approximation.

Conclusion

The placement of MDIs on distal extension ridges helps to reduce the stress concentration on denture supporting structures. The maximum von Mises stress is affected by the different designs of clasp components. The CRPD and the IARPD with RPI clasp provide the least stress on supporting structures.

Maxillary rehabilitation using fixed and removable partial dentures with attachments: a clinical report

Despite requiring dental crown preparation and possible root canal treatment, besides the difficulty of clinical and laboratory repairs, and financial burden, the association between fixed (FPD) and removable partial dentures (RPD) by means of attachments is an important alternative for oral rehabilitation, particularly when the use of dental implants and FPDs is limited or not indicated. Among the advantages of attachment-retained RPDs are the improvements in esthetics and biomechanics, as well as correction of the buccal arrangement of anterior teeth in Kennedy Class III partially edentulous arches. This article describes the treatment sequence and technique for the use of attachments in therapy combining FPD/RPD.

Clinical evaluation of abutment teeth of removable partial denture by means of the Periotest method

Prosthodontics should be one of the means of establishing conditions for the maintenance of periodontal health. The forces applied to the abutment teeth and their effects are very important considerations in the design and construction of the removable partial dentures. This 6-month follow-up clinical study evaluated the degree of mobility of abutment teeth of distal extension and tooth supported removable partial dentures by using Periotest. Two types of clasp design were selected for evaluation. In cases with unilateral and bilateral distal-extension, a clasp design including a T clasp of Roach retentive arm, a rigid reciprocal arm and a mesial rest were used. For the abutments of tooth-supported removable partial dentures, a second clasp design with a cast circumferential buccal retentive arm, a rigid reciprocal clasp arm and a rest adjacent to the edentulous ridges was selected. A total of 68 abutment teeth was analysed. Periotest values were made at the time of denture placement (control) and at 1, 3 and 6 months after the denture placement. The statistical analysis was performed using Friedman test. All analysis was performed at a 0.05 level of significance. The results revelled that no significant changes in tooth mobility were observed during the 6-months follow-up (P > 0.05). In conclusion, our findings suggest that adequate oral hygiene instructions, careful prosthetic treatment planning and regular recall appointments play an important role in preventing changes in abutment tooth mobility caused by removable partial denture placement.

Finite element contact stress analysis of the RPD abutment tooth and periodontal ligament

OBJECTIVES

The purpose of this study was to determine the influence of the occlusal rest position in removable partial dentures on the displacement of the abutment tooth and the stress distribution in the periodontal ligament (PL).

METHODS

We constructed three-dimensional finite element models of the mandibular first and second premolars. A layer of the PL and a mesial or distal occlusal rest were produced on the second premolar as an abutment. A zero displacement was prescribed on the outer surface of the PL and the first premolar. In each simulation, the rest was moved 0.05 mm vertically to the apical direction, with or without restriction of horizontal movements. We simulated the contact phenomena on the abutment surfaces, and calculated the movements of the abutment and stress distributions in the PL.

RESULTS

We observed a maximum distal displacement of 42 microm at the buccal cusp of the abutment and a principal compressive stress of 0.35 MPa in the PL when the abutment was vertically loaded by a distal rest that was allowed to move horizontally. However, the displacements and stresses were relatively small, and were all within the physiological limitations of the tissues. The restriction of the horizontal movement of the rests was effective in reducing the horizontal displacements of the abutment, regardless of the rest position.

CONCLUSIONS

The single vertical load exerted from either the mesial or distal rest on the abutment was unlikely to cause any mechanical damage to its supporting tissues.