The effect of direct electrical current stimulation on the bone/porous metallic implant interface

Bio-Piezoelectric Ceramic Composites for Electroactive Implants-Biological Performance

Barium titanate (BaTiO3) piezoelectric ceramic may be a potential alternative for promoting osseointegration due to its piezoelectric properties similar to bone electric potentials generated in loading function. In this sense, the aim of this in vitro study was to evaluate the cellular response of human osteoblasts and gingival fibroblasts as well as the impact on S. oralis when in contact with BaTiO3 functionalized zirconia implant surfaces with piezoelectric properties. Zirconia discs with BaTiO3 were produced and contact poling (piezo activation) was performed. Osteoblasts (hFOB 1.19), fibroblasts (HGF hTERT) and S. oralis were culture on discs. Cell viability and morphology, cell differentiation markers, bacterial adhesion and growth were evaluated. The present study suggests that zirconia composite surfaces with the addition of piezoelectric BaTiO3 are not cytotoxic to peri-implant cells. Also, they seem to promote a faster initial osteoblast differentiation. Moreover, these surfaces may inhibit the growth of S. oralis by acting as a bacteriostatic agent over time. Although the piezoelectric properties do not affect the cellular inflammatory profile, they appear to enable the initial adhesion of bacteria, however this is not significant over the entire testing period. Furthermore, the addition of non-poled BaTiO3 to zirconia may have a potential reduction effect on IL-6 mediated-inflammatory activity in fibroblasts.

Biocompatibility of (Ba,Ca)(Zr,Ti)O3 piezoelectric ceramics for bone replacement materials

Total joint replacement implants are generally designed to physically mimic the biological environment to ensure compatibility with the host tissue. However, implant instability exposes patients to long recovery periods, high risk for revision surgeries, and high expenses. Introducing electrical stimulation to the implant site to accelerate healing is promising, but the cumbersome nature of wired devices is detrimental to the implant design. We propose a novel strategy to stimulate cells at the implant site by utilizing piezoelectric ceramics as electrical stimulation sources. The inherent ability of these materials to form electric surface potentials under mechanical load allows them to act as internal power sources. This characteristic is commonly exploited in non-biomedical applications such as transducers or sensors. We investigate calcium/zirconium-doped barium titanate (BCZT) ceramics in an in vitro environment to determine their potential as implant materials. BCZT exhibits low cytotoxicity with human osteoblast and endothelial cells as well as high piezoelectric responses. Microstructural adaptation was identified as a route for optimizing piezoelectric behavior. Our results show that BCZT is a promising system for biomedical applications. Its characteristic ability to autonomously generate electric surface potentials opens the possibility to functionalize existing bone replacement implant designs to improve implant ingrowth and long-term stability.

Growth of calcium phosphate on poling treated ferroelectric BaTiO3 ceramics

Barium titanate (BaTiO3; BTO) is ferroelectric and piezoelectric after poling treatment. In this study, the bioactivity of BTO was investigated after a poling treatment by examining the formation of crystal growth on specimen surfaces in vitro. Negatively charged BTO surfaces showed calcium phosphate (Ca-P) crystal growth, while deposition of sodium chloride was observed on the positively charged BTO surfaces. After 30 days immersion in Eagle's MEM, the thickness of Ca-P crystal on negatively charged BTO surfaces increased to 0.8-0.9 microm. These data indicate that incorporating selectively polarized BTO on implant surfaces is a promising means for improving the bioactivity of implant materials.

Calcium phosphate-coated porous titanium implants for enhanced skeletal fixation

Porous titanium fiber implants for cementless skeletal fixation by bone ingrowth were treated with a calcium phosphate coating applied by a plasma flame-spray technique. In a paired experiment, treated and control implants were inserted in the humeri and olecranons of 36 adult dogs for periods of 1, 2, 4, and 6 weeks. After the animals were sacrificed, a biomechanical evaluation of the strength of skeletal fixation of the implants and a histologic evaluation of bone ingrowth was done. The mean shear strength of skeletal fixation at four weeks for the calcium phosphate-coated implants was 24% greater (P less than .01) than for paired controls. No difference in strength of fixation between treated and control implants was present at other time periods. The osteoconductive properties of the ceramic coating were demonstrated by bone forming in direct contact with the calcium phosphate coating on the metal fibers of the treated implants. No significant increase for the volume of bone ingrowth was established for treated implants compared to paired controls at any time period.

External ultrasound can generate microampere direct currents in vivo from implanted piezoelectric materials

Under development is an internal fixation plate that incorporates a piezoelectric element to generate current when excited mechanically by either weight bearing or external application of ultrasound. The intent is to deliver this current to electrodes at a fracture or osteotomy site to aid in prevention or treatment of nonunion. The present study examines quantitatively the ability of external ultrasound to generate current from small piezoelectric ceramic elements implanted in tissue. An ultrasonic transducer (2.25 MHz, 10-20 V input, less than 10 mW/cm2 output) was employed to excite small test coupons of a piezoelectric ceramic in vitro and in vivo with various materials, including water, PVC gel, cortical bone, and living soft tissues, interposed. In all instances, it was possible to generate currents of up to 20 microA after rectification; currents up to 1 mA were achieved in some cases. The work indicates that external ultrasonic energy could effectively power small internal devices designed to stimulate bone healing, without the need for implanted batteries or percutaneous leads.

Bone-particle-impregnated bone cement: an in vitro study

Bone-particle-impregnated bone cement specimens (up to 30% by weight) were characterized by various test methods. The experimental bone cement showed decreased crack propagation rates and increased Young's modulus, while the ultimate tensile strength and impact strength were decreased. The viscosity could be adjusted by adding initiators lost when substituting the PMMA powder with bone particles. The present study warranted further in vivo experiments on the possibility of tissue ingrowth for which the new bone cement was developed.

Piezoelectric internal fixation devices: a new approach to electrical augmentation of osteogenesis

Prototype testing has been accomplished on a piezoelectric, internal fixation plate. This device combines a piezoelectric material with an internal fixation device as an integrated structure that provides mechanical stability, together with self-generated electrical stimulation, for treating fractures and nonunion. In bench and animal tests we have demonstrated that cyclical loading can cause a device of this type to generate electrical charge while attached to bone. After rectification, direct currents within the range known to stimulate osteogenesis can be produced by weight-bearing loads. Furthermore, electrical output of the implants can be increased by externally applied ultrasonic energy. These twin developments add significantly to the potential armamentarium of devices to enhance bone healing.

Electrically enhanced osteogenesis at various metal cathodes

Electrode-induced bone formation was studied at six different metallic cathode materials in the rabbit medullary canal. Direct cathodic currents of 0.02 and 0.2 microA/mm2 were applied for 21 days. Quantitative differences in new bone growth were found. Platinum, cobalt-chrome (F-90) and silver had more bone relative to controls at the lower geometric current density, while stainless steel (316L) and titanium cathodes were more effective at the higher current. On average, there was a significant increase (46-48%) in new bone formation at active versus control implants for either current level. No corresponding difference in the number of vascular channels were observed in the 21 day specimens. Metal-specific differences in bone formation at control implants were also found, with platinum being most stimulatory. These observations are consistent with an interfacial electrochemical mechanism for electrode stimulated osteogenesis, which perhaps acts in concert with purely electrical and mechanical forces.