Conserved regions at the DNA primase locus of IncP alpha and IncP beta plasmids

Mechanisms of strand replacement synthesis for plasmid DNA transferred by conjugation

A single strand of plasmid DNA is transferred during conjugation. We examined the mechanism of complementary strand synthesis in recipient cells following conjugative mobilization of derivatives of the IncQ plasmid R1162. A system for electroporation of donor cells, followed by immediate mating, was used to eliminate plasmid-specific replicative functions. Under these conditions, Escherichia coli recipients provided a robust mechanism for initiation of complementary strand synthesis on transferred DNA. In contrast, plasmid functions were important for efficient strand replacement in recipient cells of Salmonella enterica serovar Typhimurium. The mobilizing vector for R1162 transfer, the IncP1 plasmid R751, encodes a DNA primase with low specificity for initiation. This protein increased the frequency of transfer of R751 into Salmonella, but despite its low specificity, it was inactive on the R1162 derivatives. The R751 primase was slightly inhibitory for the transfer of both R751 and R1162 into E. coli. The results show that there is a chromosomally encoded mechanism for complementary strand synthesis of incoming transferred DNA in E. coli, while plasmid-specific mechanisms for this synthesis are important in Salmonella.

Complete sequence of the IncPbeta plasmid R751: implications for evolution and organisation of the IncP backbone

The broad host range IncP plasmids are of particular interest because of their ability to promote gene spread between diverse bacterial species. To facilitate study of these plasmids we have compiled the complete sequence of the IncPbeta plasmid R751. Comparison with the sequence of the IncPalpha plasmids confirms the conservation of the IncP backbone of replication, conjugative transfer and stable inheritance functions between the two branches of this family. As in the IncPalpha genome the DNA of this backbone appears to have been enriched for the GCCG/CGGC motifs characteristic of the genome of organisms with a high G+C content, such as P. aeruginosa, suggesting that IncPbeta plasmids have been subjected during their evolution to similar mutational and selective forces as IncPalpha plasmids and may have evolved in pseudomonad hosts. The IncP genome is consistently interrupted by insertion of phenotypic markers and/or transposable elements between oriV and trfA and between the tra and trb operons. The R751 genome reveals a family of repeated sequences in these regions which may form the basis of a hot spot for insertion of foreign DNA. Sequence analysis of the cryptic transposon Tn4321 revealed that it is not a member of the Tn21 family as we had proposed previously from an inspection of its ends. Rather it is a composite transposon defined by inverted repeats of a 1347 bp IS element belonging to a recently discovered family which is distributed throughout the prokaryotes. The central unique region of Tn4321 encodes two predicted proteins, one of which is a regulatory protein while the other is presumably responsible for an as yet unidentified phenotype. The most striking feature of the IncPalpha plasmids, the global regulation of replication and transfer by the KorA and KorB proteins encoded in the central control operon, is conserved between the two plasmids although there appear to be significant differences in the specificity of repressor-operator interactions. The importance of these global regulatory circuits is emphasised by the observation that the operator sequences for KorB are highly conserved even in contexts where the surrounding region, either a protein coding or intergenic sequence, has diverged considerably. There appears to be no equivalent of the parABCDE region which in the IncPalpha plasmids provides multimer resolution, lethality to plasmid-free segregants and active partitioning functions. However, we found that the continuous sector from co-ordinate 0 to 9100 bp, encoding the co-regulated klc and kle operons as well as the central control region, could confer a high degree of segregational stability on a low copy number test vector. Thus R751 appears to exhibit very clearly what was first revealed by study of the IncPalpha plasmids, namely a fully functional co-ordinately regulated set of replication, transfer and stable inheritance functions.

Divergence and conservation of the partitioning and global regulation functions in the central control region of the IncP plasmids RK2 and R751

The central control region (Ctl) of IncP plasmids is associated with two phenotypes: the coordinate expression of replication and transfer genes; and the ability to increase the segregational stability of a low-copy number test plasmid. This region of the IncP beta plasmid R751 shows significant sequence divergence from the IncP alpha plasmid RK2 sequence, and two genes, korF and korG, present in the IncP alpha region are missing in the IncP beta Ctl. In other respects the organization of the Ctl is basically the same. Although the two key global regulatory genes korA and korB are highly conserved, studies on their ability to repress transcription from a variety of IncP alpha and IncP beta plasmid promoters suggest differences in operator recognition by KorA and synergy with other repressors. The products of kfrA, upf54.8 and upf54.4 genes are conserved; KfrA shows least conservation and, while retaining the ability to act as a transcriptional repressor, appears to have completely different DNA-binding specificity. The genes required for the plasmid segregational stabilization (partitioning) phenotype--incC, korB and the korB operator OB3--are conserved and contribute to a more efficient plasmid stabilization than the IncP alpha equivalents. This may indicate that the Ctl plays an especially important role in partitioning of IncP beta plasmids, since they lack the second stability region (parlmrs) found in IncP alpha plasmids.

Evolution of the korA-oriV segment of promiscuous IncP plasmids

Plasmids belonging to Escherichia coli incompatibility group P are of particular interest because they can transfer between, and be stably maintained in, almost all Gram-negative bacterial species. The segment of the IncP alpha plasmid genome between the key regulatory gene korA and the vegetative replication origin, oriV, encodes a series of operons co-regulated with replication and transfer functions by the KorA protein. To determine which of these genes are likely to have an important role in IncP plasmid survival the equivalent region of the distantly related IncP beta plasmid R751 was sequenced. Sequence comparisons show that the kla operon (formerly the kilA locus, which is also responsible for a cryptic tellurite-resistance determinant) is completely absent from R751. Similarly in the kle region, which encodes genes associated with the KilE+ phenotype of unknown function, kleC and kleD, which we proposed arose by a duplication of kleA and kleB, are also completely absent. The genes that are conserved are klcA (formerly kilC, responsible for the KilC+, and recently proposed to be involved in overcoming restriction barriers during transfer), klcB (an ORF interrupted by Tn1 insertion in RK2), korC (a transcriptional repressor which controls the klcK and kle operons), and kleA, kleB, kleE and kleF. A striking feature of the organization in R751 is the lack of the strong transcriptional termination signals which are present in IncP alpha plasmids. The degree of divergence between the plasmids facilitates the identification of motifs of probable functional importance in the primary protein sequences.

Gene organization and nucleotide sequence of the primase region of IncP plasmids RP4 and R751

The primase genes of RP4 are part of the primase operon located within the Tra1 region of this conjugative plasmid. The operon contains a total of seven transfer genes four of which (traA, B, C, D) are described here. Determination of the nucleotide sequence of the primase region confirmed the existence of an overlapping gene arrangement at the DNA primase locus (traC) with in-phase translational initiation signals. The traC gene encodes two acidic and hydrophilic polypeptide chains of 1061 (TraC1) and 746 (TraC2) amino acids corresponding to molecular masses of 116,721 and 81,647 Da. In contrast to RP4 the IncP beta plasmid R751 specifies four large primase gene products (192, 152, 135 and 83 kDa) crossreacting with anti-RP4 DNA primase serum. As shown by deletion analysis at least the 135 and 83 kDa polypeptides are two separate translational products that by analogy with the RP4 primases, arise from in-phase translational initiation sites. Even the smallest primase gene products TraC2 (RP4) and TraC4 (R751) exhibit primase activity. Nucleotide sequencing of the R751 primase region revealed the existence of three in-phase traC translational initiation signals leading to the expression of gene products with molecular masses of 158,950 Da, 134,476 Da, and 80,759 Da. The 192 kDa primase polypeptide is suggested to be a fusion protein resulting from an in frame translational readthrough of the traD UGA stopcodon. Distinct sequence similarities can be detected between the TraC proteins of RP4 and R751 gene products TraC3 and TraC4 and in addition between the TraD proteins of both plasmids. The R751 traC3 gene contains a stretch of 507 bp which is unrelated to RP4 traC or any other RP4 Tra1 gene.

Initiation of DNA synthesis in the transfer origin region of RK2 by the plasmid-encoded primase: detection using defective M13 phage

The broad host range IncP (IncP1) plasmids of gram-negative bacteria encode DNA primases that are involved in conjugal DNA synthesis. The primase of RK2/RP4 is required for efficient DNA transfer to certain gram-negative bacteria, indicating that the enzyme primes complementary strand synthesis in the recipient. In vitro, the primase initiates synthesis of oligoribonucleotides at 3'-dGdT-5' dinucleotides on the template strand. In this report, replication-defective M13 phage are used to assay the ability of the RK2-encoded primase to initiate complementary strand synthesis in vivo on single-strand templates containing the RK2 origin of conjugal transfer (oriT) or the RK2 origin of vegetative replication (oriV). The results show that sequences from either strand of the oriT region serve as efficient substrates for the RK2 primase and can enhance the growth of the defective M13 vectors delta E101 and delta Elac to levels approaching wild-type. The primise-oriT interaction appeared specific, since neither the oriV sequence nor another RK2 region, trfB, significantly enhanced growth of the defective phage, either in the presence or in the absence of the primase. In contrast to ColEl and F, this study also shows that the oriV region of RK2 lacks sites that are recognized by the host-specified DNA priming systems. The results suggest that the oriT region contains sites on both DNA strands that are efficient substrates for the plasmid-encoded primase, facilitating initiation of complementary strand DNA synthesis in both donor and recipient during conjugation.

Mutagenesis of the Tra1 core region of RK2 by using Tn5: identification of plasmid-specific transfer genes

The conjugation system of the IncP alpha plasmid RK2/RP4 is encoded by transfer regions designated Tra1, Tra2, and Tra3. The Tra1 core region, cloned on plasmid pDG4 delta 22, consists of the origin of transfer (oriT) and 2.6 kilobases of flanking DNA providing IncP alpha plasmid-specific functions that allow pDG4 delta 22 to be mobilized by the heterologous IncP beta plasmid R751. Tn5 insertions in pDG4 delta 22 define a minimal 2.2-kilobase region required for plasmid-specific transfer of oriT. The Tra1 core contains the traJ and traK genes as well as an 18-kilodalton open reading frame downstream of traJ. The traJ and traK genes were shown to be required for transfer by complementation of inserts within these genes. Genetic evidence for the role of the 18-kilodalton open reading frame in transfer was obtained, although this protein has not been detected in cell lysates. These studies indicate that at least three transfer proteins are involved in plasmid-specific interactions at oriT.

Location of the relaxation complex nick site within the minimal origin of transfer region of RK2

Transfer of plasmid DNA during bacterial conjugation begins at a specific site: the origin of transfer (oriT). The oriT region of the broad host range plasmid RK2 is located on a 250 bp fragment. Deletions involving either end of this region reduce transfer function, indicating that an extended sequence is required for optimal oriT activity. The single-strand nick induced by the RK2 DNA-protein relaxation complex is located adjacent to the 19 bp inverted repeat within the minimal oriT sequence. These results provide strong evidence that the plasmid relaxation event induced in vitro represents the nicking reaction that initiates DNA transfer at oriT during conjugation.

Nucleotide sequence of the kanamycin resistance determinant of plasmid RP4: homology to other aminoglycoside 3'-phosphotransferases

The kanamycin resistance determinant of the broad-host-range plasmid RP4 encodes an aminoglycoside 3'-phosphotransferase of type I. The nucleotide sequence of the kanamycin resistance gene (Kmr) and the right end of the insertion element IS8 of plasmid RP4 has been determined. The gene (816 bp) is located between IS8 and the region (Tra 1) encoding plasmid factors mediating bacterial conjugation. Kmr and Tra 1 are transcribed toward each other. The nucleotide sequence has been compared to five related aphA genes originating from gram-negative and gram-positive organisms and from antibiotic producers. Among these that of Tn903 shares the highest degree of similarity (60%) with the RP4 gene. Significant similarities were also detected between the amino acid sequences of the six enzymes. The C-terminal domains of six different aminoglycoside 3'-phosphotransferases (APH(3'] are highly conserved. They are substantially similar to segments of a variety of enzymes using ATP as cofactor. The role of the C-terminal sequences of APH(3') as potential domains for ATP recognition and binding is discussed.

Comparison of the organisation of the genomes of phenotypically diverse plasmids of incompatibility group P: members of the IncP beta sub-group are closely related

Comparison of physical maps of the broad host range plasmids R751, R906 and R772, belonging to the IncP beta sub-group of the Escherichia coli incompatibility group P, reveals two large regions of similarity, separated by dissimilar regions which contain the majority of the cleavage sites for restriction endonucleases with hexanucleotide recognition sites. Mapping of the regions of these plasmids which show homology to probes specific for genetically characterised segments of the distantly related IncP alpha plasmid RK2, involved in plasmid maintenance or conjugal transfer, reveals that all four plasmids share a similar genetic organisation. In each case the homologous plasmid backbone is interrupted by heterologous segments both between the essential replication loci oriV and trfA, and between the conjugal transfer regions tra1 and tra2, although in the case of R772 the segment of the backbone carrying the trfA and tra2 regions is inverted relative to that of the other plasmids. However, in the case of pJP4, shown to be a fourth member of the IncP beta sub-group, the backbone is interrupted only by a single large segment adjacent to the trfA region. Mapping of the regions of the four IncP beta plasmids which show homology to Tn501 and nucleotide sequence determination at the ends of the homologous regions reveals that R906, R772 and pJP4 share a common mercury resistance region. This region, which appears to have been inactivated in R772, was probably inserted into a common ancestor of these plasmids by the transposition of an element related to an ancestor of Tn501. R751 shows no trace of the mercury resistance region, but contains a short relict of Tn501, derived from an independent insertion event.

Molecular cloning of the plasmid RP4 primase region in a multi-host-range tacP expression vector

Plasmid RP4 primase was overproduced by utilizing autoregulated high-level expression vector systems in Escherichia coli and in four other Gram-negative bacterial species. Analysis of the products in E. coli revealed that in addition to the two primase polypeptides of 118 and 80 kDa the pri region of RP4 encodes two smaller proteins of 16.5 and 8.6 kDa. The transcript for the four RP4-specified products is polycistronic. The vector system used in E. coli is based on the plasmid pKK223-3 (Brosius and Holy, 1984), a ColE1-type replicon which contains a polylinker sequence flanked on one side by the controllable tac promoter and on the other side by two strong transcriptional terminators. The gene for the lac repressor (lacIQ) was inserted to render the use of the plasmid independent from repressor-overproducing strains. The gene cartridge essential for high-level expression and selection was combined with the RSF1010 replicon to generate a vector plasmid functioning in a wide variety of Gram-negative hosts. The versatility of the vector family was extended by constructing derivatives that contain the polylinker in inverted orientation relative to the tac promoter. Therefore, the orientation of the cloned fragment can be chosen by 'forced cloning' into the appropriately selected vector.