Efficiency of charge recombination in organic light emitting diodes

Reduced bimolecular charge recombination in efficient organic solar cells comprising non-fullerene acceptors

Bimolecular charge recombination is one of the most important loss processes in organic solar cells. However, the bimolecular recombination rate in solar cells based on novel non-fullerene acceptors is mostly unclear. Moreover, the origin of the reduced-Langevin recombination rate in bulk heterojunction solar cells in general is still poorly understood. Here, we investigate the bimolecular recombination rate and charge transport in a series of high-performance organic solar cells based on non-fullerene acceptors. From steady-state dark injection measurements and drift-diffusion simulations of the current-voltage characteristics under illumination, Langevin reduction factors of up to over two orders of magnitude are observed. The reduced recombination is essential for the high fill factors of these solar cells. The Langevin reduction factors are observed to correlate with the quadrupole moment of the acceptors, which is responsible for band bending at the donor-acceptor interface, forming a barrier for charge recombination. Overall these results therefore show that suppressed bimolecular recombination is essential for the performance of organic solar cells and provide design rules for novel materials.

Mobility dependent recombination models for organic solar cells

Modern solar cell technologies are driven by the effort to enhance power conversion efficiencies. A main mechanism limiting power conversion efficiencies is charge carrier recombination which is a direct function of the encounter probability of both recombination partners. In inorganic solar cells with rather high charge carrier mobilities, charge carrier recombination is often dominated by energetic states which subsequently trap both recombination partners for recombination. Free charge carriers move fast enough for Coulomb attraction to be irrelevant for the encounter probability. Thus, charge carrier recombination is independent of charge carrier mobilities. In organic semiconductors charge carrier mobilities are much lower. Therefore, electrons and holes have more time react to mutual Coulomb-forces. This results in the strong charge carrier mobility dependencies of the observed charge carrier recombination rates. In 1903 Paul Langevin published a fundamental model to describe the recombination of ions in gas-phase or aqueous solutions, known today as Langevin recombination. During the last decades this model was used to interpret and model recombination in organic semiconductors. However, certain experiments especially with bulk-heterojunction solar cells reveal much lower recombination rates than predicted by Langevin. In search of an explanation, many material and device properties such as morphology and energetic properties have been examined in order to extend the validity of the Langevin model. A key argument for most of these extended models is, that electron and hole must find each other at a mutual spatial location. This encounter may be limited for instance by trapping of charges in trap states, by selective electrodes separating electrons and holes, or simply by the morphology of the involved semiconductors, making it impossible for electrons and holes to recombine at high rates. In this review, we discuss the development of mobility limited recombination models from the early Langevin theory to state-of-the art models for charge carrier recombination in organic solar cells.

Simulating charge transport in organic semiconductors and devices: a review

Charge transport simulation can be a valuable tool to better understand, optimise and design organic transistors (OTFTs), photovoltaics (OPVs), and light-emitting diodes (OLEDs). This review presents an overview of common charge transport and device models; namely drift-diffusion, master equation, mesoscale kinetic Monte Carlo and quantum chemical Monte Carlo, and a discussion of the relative merits of each. This is followed by a review of the application of these models as applied to charge transport in organic semiconductors and devices, highlighting in particular the insights made possible by modelling. The review concludes with an outlook for charge transport modelling in organic electronics.

The key role of geminate electron-hole pair recombination in the delayed fluorescence in rhodamine 6G and ATTO-532

In this paper we investigate the delayed fluorescence (DF) phenomena in the widely used laser dye, rhodamine 6G, and its derivative ATTO-532 as a function of excitation energy using highly sensitive time-resolved gated nanosecond spectroscopy. Excitation with UV laser radiation results in delayed emission, which arises from singlet states created from geminate pair recombination, not triplet annihilation. For the first time the origins and photo-physical properties of delayed fluorescence in these highly fluorescent molecules are elucidated.

Trap-assisted recombination in disordered organic semiconductors

The trap-assisted recombination of electrons and holes in organic semiconductors is investigated. The extracted capture coefficients of the trap-assisted recombination process are thermally activated with an identical activation energy as measured for the hole mobility μ(p). We demonstrate that the rate limiting step for this mechanism is the diffusion of free holes towards trapped electrons in their mutual Coulomb field, with the capture coefficient given by (q/ε)μ(p). As a result, both the bimolecular and trap-assisted recombination processes in organic semiconductors are governed by the charge carrier mobilities, allowing predictive modeling of organic light-emitting diodes.

Directly patternable, highly conducting polymers for broad applications in organic electronics

Postdeposition solvent annealing of water-dispersible conducting polymers induces dramatic structural rearrangement and improves electrical conductivities by more than two orders of magnitude. We attain electrical conductivities in excess of 50 S/cm when polyaniline films are exposed to dichloroacetic acid. Subjecting commercially available poly(ethylene dioxythiophene) to the same treatment yields a conductivity as high as 250 S/cm. This process has enabled the wide incorporation of conducting polymers in organic electronics; conducting polymers that are not typically processable can now be deposited from solution and their conductivities subsequently enhanced to practical levels via a simple and straightforward solvent annealing process. The treated conducting polymers are thus promising alternatives for metals as source and drain electrodes in organic thin-film transistors as well as for transparent metal oxide conductors as anodes in organic solar cells and light-emitting diodes.

Currents and photocurrents in organic materials determined by the interface phenomena

The role of interface between molecular material and electrode on currents and photocurrents is considered. Mechanisms of charge carrier injection, electrode recombination and transport are discussed. Particularly thermal, excitonic, photo and tunneling injection of charge carriers, diffusion in presence of image force, interface barrier between electrode and organic materials and two organic materials, non-uniformity of electrodes and other phenomena on charge carrier injection are considered. The data presented in the review which complete theoretical considerations have been taken from previous as well as current literature. The considered phenomena are very important for the analysis of many practical problems for molecular electronic devices such as rectification of current, organic transistors, electroluminescence, photovoltaic effects and some similar problems.