Recent developments in the industrial application of computerized tomography with ionizing radiation

Recent developments in X-ray diffraction/scattering computed tomography for materials science

X-ray diffraction/scattering computed tomography (XDS-CT) methods are a non-destructive class of chemical imaging techniques that have the capacity to provide reconstructions of sample cross-sections with spatially resolved chemical information. While X-ray diffraction CT (XRD-CT) is the most well-established method, recent advances in instrumentation and data reconstruction have seen greater use of related techniques like small angle X-ray scattering CT and pair distribution function CT. Additionally, the adoption of machine learning techniques for tomographic reconstruction and data analysis are fundamentally disrupting how XDS-CT data is processed. The following narrative review highlights recent developments and applications of XDS-CT with a focus on studies in the last five years. This article is part of the theme issue 'Exploring the length scales, timescales and chemistry of challenging materials (Part 2)'.

Control Systems with Tomographic Sensors-A Review

Industrial process tomography offers two key advantages over conventional sensing systems. Firstly, process tomography systems provide information about 2D or 3D distributions of the variables of interest. Secondly, tomography looks inside the processes without penetrating them physically, i.e., sensing is possible despite harsh process conditions, and the operation of the process is not disturbed by intrusive sensors. These advantages open new perspectives for the field of process control, and the potential of closed-loop control applications is one of the main driving forces behind the development of industrial tomography. Despite these advantages and decades of development, closed-loop control applications of tomography are still not really common. This article provides an overview of the current state-of-the-art in the field of control systems with tomographic sensors. An attempt is made to classify the different control approaches, critically assess their strengths and weak points, and outline which directions may lead to increased future utilization of industrial tomography in the closed-loop feedback control.

3D imaging using combined neutron-photon fan-beam tomography: A Monte Carlo study

The application of combined neutron-photon tomography for 3D imaging is examined using MCNP5 simulations for objects of simple shapes and different materials. Two-dimensional transmission projections were simulated for fan-beam scans using 2.5MeV deuterium-deuterium and 14MeV deuterium-tritium neutron sources, and high-energy X-ray sources, such as 1MeV, 6MeV and 9MeV. Photons enable assessment of electron density and related mass density, neutrons aid in estimating the product of density and material-specific microscopic cross section- the ratio between the two provides the composition, while CT allows shape evaluation. Using a developed imaging technique, objects and their material compositions have been visualized.

Tomography and elemental analysis of biological systems

The various forms of tomography, expressed as transmission and emission modes using gamma rays and neutrons, are generally discussed in terms of providing information nondestructively about the distribution of elemental composition in a plane through an object. The combination of the principles of tomography with neutron activation analysis is the basis for neutron-induced gamma-ray emission tomography. The concept of detection limit in induced gamma-ray emission tomography, as proposed, incorporates a further factor that is a measure of the quality of the image produced. A specific example is given for the elemental analysis and imaging of a bone specimen.

X-ray microtomography of biological tissues using laboratory and synchrotron sources

X-ray microradiography is a well established technique for the study of biological structures in which the projected absorption is measured, usually with photographic film or resist. If scanning X-ray microradiography with a 15-μm beam, 2-D scanning, and photon counting is used, more accurate results can be obtained and real-time experiments undertaken. Addition of a rotation axis allows computerized axial tomography to be done at a resolution of 15 μm. This technique overcomes the inherent difficulty of microradiography that all detail perpendicular to the plane of the specimen is superimposed. This method has been applied to the study of the 3-D mineral distribution in a 0.8×0.8 mm column of human cortical bone with a laboratory X-ray source. Calculation of the wavelength dependence of the linear absorption coefficient for liver and bone shows that, for a choice of wavelength in the range of 3-0.4 Å (4-30 keV), the specimen thickness can be from 100μm-2 cm and 10 μm-3 mm, respectively.Synchrotron X-radiation has the potential for better resolution because of the higher intensity, which allows the use of a narrower beam. There is also the possibility of determining individual element 3-D distributions from measurements on either side of the absorption edges because of the continuous nature of the spectrum and also the possibility of doing this from X-ray fluorescence measurements. To investigate these possibilities, a tomographic apparatus has been built based on the availability of accurately ground, tungsten carbide balls. Metrological assessment shows that the specimen remains within <1 μm of the required position during translation and rotation. Preliminary X-ray tomographic studies with a 4-μm diameter beam have been started at the Daresbury laboratory synchrotron source.