Chemiluminescence analysis of captopril: comparison between luminol and rhodamine B-sensitized cerium(IV) methods

Energy transfer processes of chemiluminescence reaction systems with cerium(IV) ions and their analytical application: a review

This review is devoted to a thorough discussion of chemiluminescence of the systems containing Ce(IV) ions as oxidising agents, with particular emphasis on the energy transfer processes in such systems. The influence of sensitisers such as: rhodamines, quinine, lanthanide ions and their complexes and quantum-dots has been analysed and the practical use of reaction systems for development of new chemiluminescence methods for determination of therapeutic drugs and substances of biological importance in different matrices such as human urine or serum is indicated. The types of emitters and excited reaction products taking part in energy transfer to sensitisers and processes taking place in the chemiluminescence reaction systems containing Ce(IV) ions are presented on the basis of recent literature.

Chemiluminometric determination of captopril in a multi-pumping flow system

In this work, a simple, versatile and fully automated analytical methodology for the chemiluminometric determination of captopril - an angiotensin II-converting-enzyme (ACE) inhibitor - in pharmaceutical formulations, is proposed. The developed methodology was based on the enhancement by captopril of the chemiluminescence emission of tris(2,2'-bipyridyl)ruthenium(II). In sulphuric acid medium tris(2,2'-bipyridyl)ruthenium(II) was oxidized by cerium(IV) and converted into a reactive oxidant specie [Ru(bpy)(3)](3+), which was subsequently reduced with captopril in order to yield a significant enhancement of the original chemiluminescence emission that was directly related to captopril concentration. The analytical process was implemented by resorting to an automated multi-pumping flow system (MPFS) that enabled the establishment of multiple reaction interfaces, which, in combination with the created pulsed flowing stream assured a fast and reproducible sample/reagent mixing and reaction development essential to guarantee the generation and subsequent measurement of the short-lived species involved in the chemiluminescent process. The developed system employed three solenoid micro-pumps as the only flow manifold active components. These assured the insertion, propelling and commuting of all solutions. The automatic actuation of the solenoid micro-pumps provided an easily programmed, operated and controlled analytical flow system, exhibiting high versatility, efficiency and compactness at a low cost. Under the optimized experimental conditions, the proposed method allowed the determination of captopril for concentrations between 2×10(-3) and 1.5×10(-1)mmolL(-1) (r=0.9996, n=6) and a sampling frequency of about 58 determinations per hour, producing 620μL of waste per determination. The results obtained for pharmaceutical formulations were statistically comparable to those provided by the reference procedure with a relative deviation between -2.32 and 1.39%. The possible mechanism of the chemiluminescence reaction was also discussed in this work.

A simple spectrophotometric method for the determination of captopril in pharmaceutical preparations using ammonium molybdate

A simple, rapid and sensitive spectrophotometric method for the determination of captopril (CPT) in pharmaceutical formulations is proposed. This method is based on the reduction reaction of ammonium molybdate, in the presence of sulphuric acid, for the group thiol of CPT, producing a green compound (λ max 407 nm). Beer's law is obeyed in a concentration range of 4.60 x 10-4 - 1.84 x 10-3 mol l-1 of CPT with an excellent correlation coefficient (r = 0.9995). The limit of detection and limit of quantification were 7.31 x 10-6 e 2.43 x 10-5 mol l-1 of CPT, respectively. The proposed method was successfully applied to the determination of CPT in commercial brands of pharmaceuticals. No interferences were observed from the common excipients in the formulations. The results obtained by the proposed method were favorably compared with those given by the official reported method at 95 % confidence level.

Development and validation of a capillary electrophoresis method with laser-induced fluorescence detection for the determination of captopril in human urine and pharmaceutical preparations

This study describes the development of a CE method for the analysis of the antihypertensive drug captopril using LIF detection. The method is based on the derivatization of captopril with the fluorescent label 5-iodoacetamidofluorescein. The optimization of the electrophoretic electrolyte composition together with other variables, such as applied voltage and injection time, resulted in a solution of 20 mM phosphate buffer adjusted to pH 12.0. The calibration curve for the fluorescent captopril derivative was linear in the concentration range 3.5-6000 ng/mL with a detection limit of 0.5 ng/mL. Intra- and interday precision (at a concentration of about 100 times the LOD) were less than 0.86 and 1.16%, respectively, both expressed as RSD. The assay was successfully used for quantification of captopril in some marketed pharmaceutical preparations and urine samples.

Determination of tetracycline, chlortetracycline and oxytetracycline by flow injection with inhibitory chemiluminescence detection using copper(II) as a probe ion

This paper reports an indirect flow-injection (FI) method for the determination of the tetracycline drugs (TCs), tetracycline (TC), chlortetracycline (CTC) and oxytetracycline (OTC), using copper(II) as a probe ion. The method was based on the inhibition caused by these TCs to the copper(II)-catalysed chemiluminescence (CL) reaction between luminol and H(2)O(2). The CL reaction was induced on-line and injection of the sample produced negative peaks as a result of the copper(II) complexation or displacement by the analytes. The height of the peaks was proportional to the drug concentration in the sample. The choice of the catalyst ion, the concentration of luminol, H(2)O(2) and copper(II) are discussed. The linear range was 3.6 x 10(-8)-1.0 x 10(-5), 1.1 x 10(-7)-1.0 x 10(-5) and 1.9 x 10(-7)-1.0 x 10(-5) mol/L for TC, CTC and OTC, respectively. The detection limit was 5.0 x 10(-9) mol/L for TC, 1.0 x 10(-8) mol/L for CTC and 2.0 x 10(-8) mol/L for OTC (3sigma), respectively. The method was applied to the determination of TCs in pharmaceutical preparations and human urine with recoveries in the range 95-105%.

Flow injection biamperometric determination of captopril

An automated method to determine captopril (1-[(2S)-3-mercapto-2-methylpropionyl]-L-proline) is proposed. A flow injection manifold based on the indirect biamperometric detection of the captopril by using Fe(III)/Fe(II) as an indicating redox system and a Z-shaped flow-cell configuration, was developed. The calibration curve is linear over the range 0.03-3.6 microg ml(-1) of captopril. The relative standard deviation for the determination of 0.76 microg ml(-1) of captopril is 0.97% (n = 12) and the sample throughput is 69 h(-1). This method was applied to the determination of captopril to commercially available pharmaceutical preparations.

Chemiluminescence in drug assay

The phenomenon of chemiluminescence allows the development of simple analytical procedures using low cost instrumentation which can be easily controlled by computers. The sensitivity of the methods is excellent, and selectivity is improved by high-performance liquid chromatographic separation. A broad area of chemiluminometric applications is drug analysis, which is reviewed in this paper.