Determination of analytical error function for beta-blockers as a possible weighting method for the estimation of the regression parameters

Determination of saquinavir and ritonavir in human plasma by reversed-phase high-performance liquid chromatography and the analytical error function

Two simple and reproducible high-performance liquid chromatography methods with ultraviolet detection were developed and validated for the quantitation of two protease inhibitors, saquinavir and ritonavir, in human plasma. The same single liquid-liquid extraction procedure with ethyl acetate-hexane (50:50, v/v), reversed-phase column and mobile phase were used. The analyses were accomplished using a Luna C(18) column (150 mm x 4.6mm i.d.) with a C(18) guard column and, the mobile phase consisted of acetonitrile and 70 mM KH(2)PO(4) adjusted to pH 5 with 80 mM Na(2)HPO(4) (46:54, v/v). The wavelength was set at 240 nm for saquinavir and at 210 nm for ritonavir. The retention times were 6.4 min for saquinavir and 8.3 min for ritonavir. The methods were linear over the range of 100-2500 ng/ml for saquinavir and 200-2500 ng/ml for ritonavir. Intra and inter-day precision and accuracy were less than 10.2% for both drugs. Recovery were 90 and 87% for saquinavir and ritonavir, respectively. The drugs were stable at different relevant storage and working conditions. After the validation, their analytical error functions were established as standard deviation (S.D., ng/ml) = 4.84 + 7.14 x 10(-2)C (C is the theoretical concentration value) for saquinavir and S.D. (ng/ml) = 39.98 + 2.40 x 10(-5)C(2) for ritonavir.

Determination of abacavir in human plasma by high-performance liquid chromatography with ultraviolet detection and the analytical error function

A rapid and simple high-performance liquid chromatography method has been developed for the determination of the HIV-1 reverse transcriptase inhibitor abacavir in human plasma. It included a single liquid-liquid extraction procedure with a mixture of ethyl acetate-diethyl ether prior to reversed-phase chromatography on a C18 column and C18 precolumn insert. Ultraviolet detection was set at 285 nm. The mobile phase consisted of water-acetonitrile (83:17, v/v) and the flow rate was kept at 1 mL/min. The total run time for a single analysis was 10 min. The method has been validated over the range 50-2500 ng/mL. The assay was linear over the entire concentration range (r2 = 0.9993). Intra- and inter-day precision and accuracy were less than 8.1 and -5.2%, respectively. The extraction recovery was greater than 94.3%. Abacavir was stable under the relevant storage conditions tested. After the validation, the analytical error function was established as standard deviation (SD; ng/mL) = -1.072 + 0.037C (C = theoretical concentration value). The method developed and its associated analytical error function will be suitable for pharmacokinetic studies and monitoring of HIV-1 patients.

Simultaneous determination of the acid/base antihypertensive drugs celiprolol, bisoprolol and irbesartan in human plasma by liquid chromatography

A simple, rapid method for the simultaneous determination of cardiovascular drugs: celiprolol, bisoprolol and irbesartan in human plasma is described. The two main features of the proposed method deal first, with a simultaneous solid phase extraction of weakly basic beta-blockers derivatives and irbesartan which exhibit weak acidic properties; second with an absorbance monitoring using diode array detection in order to insure an improved selectivity. The separation is performed on a C(18) Kromasil 4.6 mm x 150 mm column using a linear gradient to achieve an entire separation of the four species in less than 20 min. The full analytical validation is performed according to guidance for industry for bioanalytical method validation. Linearity of the response was demonstrated for each drug for a range fulfilling the reported plasma levels, that is 10-500, 5-250 and 20-1000 ng l(-1) for celiprolol, bisoprolol and irbesartan respectively. Intra- and inter-day relative standard deviations for all compounds were, in any case, lower than 11% and the method exhibits a convenient accuracy (percentage of relative error lower than 6% for each drug). In each case, the LOD were sufficient to detect post dose trough concentrations for checking patient's observance. Moreover, selectivity towards either endogenous species or co-administered drugs was demonstrated by combination of the use of the solid phase extraction process, gradient elution and diode array detection facilities, making thus, the proposed technique especially suitable for routine drug monitoring of resistant hypertensive patients.

Development, validation and analytical error function of two chromatographic methods with fluorimetric detection for the determination of bisoprolol and metoprolol in human plasma

This work describes two high-performance liquid chromatographic methods for the individual determination of bisoprolol and metoprolol in human plasma. Analytical methods involve two different liquid-liquid extractions of human plasma, with diethyl ether for bisoprolol and with dichloromethane for metoprolol, coupled with a similar Nucleosil C(18) reversed-phase HPLC column. Fluorimetric detection was used to identify both beta-blockers. Retention times for bisoprolol and metoprolol were 8.7 and 3.2 min, respectively. Linear regressions for the calibration curves were linear at a concentration range of 6.25-200 ng/mL. Intra- and inter-day precision coefficients of variations and accuracy bias were acceptable (within 15%) over the entire range for both drugs. Average recovery was 89% for metoprolol and 98% for bisoprolol. Once the methods had been validated, analytical error functions were established as standard deviation (SD; ng/mL) = 2.216 + 3.608 x 10(-4)C(2) (C = theoretical concentration value) and SD-(ng/mL) = 0.408 + 0.378 x 10(-1)C for bisoprolol and metoprolol, respectively. The methods developed and their associated analytical error functions will be suitable for pharmacokinetic studies and for determination of plasma concentration if posology individualization of these drugs is needed.

Two reproducible and sensitive liquid chromatographic methods to quantify atenolol and propranolol in human plasma and determination of their associated analytical error functions

Two liquid chromatography (LC) methods with fluorimetric detection have been developed to measure atenolol and propranolol in human plasma. The same 5 microm Nucleosil RP-18 column, extraction procedure and mobile phase (containing acetonitrile, water, triethylamine and phosphoric acid, pH 3) were used. The linearity ranges were 25-800 ng/ml for atenolol and 3.13-100 ng/ml for propranolol. The coefficients of variation for validation assays were lower than 15% at the concentration assayed. The functions of the analytical error were linear: SD (ng/ml)=7.698+0.037C for atenolol and SD (ng/ml)=0.126+0.036C for propranolol.

Determination of celiprolol and oxprenolol in human plasma by high-performance liquid chromatography and the analytical error function

Two reversed-phase HPLC methods with UV detection to quantify celiprolol and oxprenolol in human plasma are described. The analytical methods for the determination of both drugs used the same reversed-phase HPLC column, mobile phase and extraction procedure. Linearity was obtained in the ranges 15.63-1000 and 25-800 ng/ml for celiprolol and oxprenolol, respectively. Intra-day and inter-day variation was lower than 14%. After validation of the methods, analytical error functions were established as S.D. (ng/ml)=3.096+0.041C for celiprolol and S.D. (ng/ml)=8.906+8.075x10(-8)C3 for oxprenolol.

Error structure for the HPLC analysis for atenolol, metoprolol and propranolol: a useful weighting method in parameter estimation

Three reversed-phase high performance liquid chromatography (HPLC) methods with UV detection were developed and fully validated for the quantification of three beta-blockers: atenolol, metoprolol and propranolol. After validation, error structures for the HPLC analysis were established using a convenient and practical procedure. The mean percentage of relative standard deviation (RSD) of the experimental concentrations (C), were less than 4.29% for proportionality and less than 3.68% for precision for any of the drugs, which allowed the quantitation of beta-blockers assayed at concentrations in the range 25-0.78 micrograms.ml-1. The error structures for the HPLC analysis were: SD (micrograms.ml-1) = 5.02 x 10(-2) C for atenolol, SD (micrograms.ml-1) = 4.55 x 10(-2) + 0.63 x 10(-2) C - 7.58 x 10(-6) C3 for metoprolol and SD (micrograms.ml-1) = 2.73 x 10(-2) C - 3.49 x 10(-4) C2 for propranolol. The reciprocal of the square of the SD of the drug concentrations measured within the calibration curve could be used as weighting methods in parameter estimation by non-linear regression.