Non-enzymatic glucose sensor based on a g-C3N4/NiO/CuO nanocomposite

Grain boundary/doping/architecture engineering in hierarchical N-doped CuO microflowers derived from Cu-based metal-organic framework architectures for highly efficient nonenzymatic glucose detection

Glucose detection is essential in clinical medicine, and the reasonable design of metal oxide electrocatalysts plays a crucial role in developing efficient nonenzymatic glucose (NEG) sensors. Herein, grain boundary/doping/architecture engineering is used to tailor the structures of CuO nanomaterials and tune their surface/electron-transfer properties toward enhanced electrocatalytic oxidation of glucose. Hierarchical N-doped CuO microflowers (N-CuO-MF) are synthesized using a facile hydrothermal method, followed by calcination. N-CuO-MF consist of ultrathin nanoflakes (ca. 20 nm), endowing them with a large specific surface area. Moreover, the nanoflakes are composed of ultrasmall nanoparticles, resulting in abundant grain boundaries. Notably, N-CuO-MF are derived from a precursor of Cu-based metal-organic framework (Cu-MOF) architectures, which is fabricated through a bottom-up route using glycerol as the capping agent/solvent and 1-hexadecyl-3-methylimidazolium bromide ([C16mim]Br) as the template/N source. Glycerol competitively coordinates with Cu2+, leading to the formation of 2D subunits. Moreover, [C16mim]+ cations attach to the subunit surfaces via electrostatic interaction, thus achieving Cu-MOF with a 3D hierarchical structure. As expected, the synergistic effect of rich grain boundaries, N doping, ultrathin nanoflakes, and hierarchical architecture enhances the adsorption of glucose on the electrode surfaces, accelerates electron transfer, and exposes more active sites for glucose oxidation. Accordingly, N-CuO-MF exhibit wide linear ranges, high sensitivity, fast response time, low detection limit, excellent selectivity, and good stability. Owing to their highly efficient electrocatalytic properties, N-CuO-MF could be explored as potential electrocatalysts in NEG sensors for rapid diagnostic tests and health monitoring.

A Hierarchical Core-Shell Structure of NiO@Cu2O-CF for Effective Non-Enzymatic Electrochemical Glucose Detection

Non-enzymatic glucose detection is an effective strategy to control the blood glucose level of diabetic patients. A novel hierarchical core-shell structure of nickel hydroxide shell coated copper hydroxide core based on copper foam (Ni(OH)2@Cu(OH)2-CF) was fabricated and derived from NiO@Cu2O-CF for glucose sensing. Cyclic voltammetry and amperometry experiments have demonstrated the efficient electrochemical catalysis of glucose under alkaline conditions. The measurement displays that the fabricated sensor exhibits a detection scale of 0.005-4.5 mM with a detection sensitivity of 4.67 µA/µM/cm2. It has remarkable response/recovery times in respect of 750 μM glucose (1.0 s/3.5 s). Moreover, the NiO@Cu2O-CF shows significant selectivity, reliable reproducibility and long-term stability for glucose determination, suggesting it is a suitable candidate for further applications.

Current advancements and prospects of enzymatic and non-enzymatic electrochemical glucose sensors

This review discusses the most current developments and future perspectives in enzymatic and non-enzymatic glucose sensors, which have notably evolved over the preceding quadrennial period. Furthermore, a thorough exploration encompassed the sensor's intricate fabrication processes, the diverse range of materials employed, the underlying principles of detection, and an in-depth assessment of the sensors' efficacy in detecting glucose levels within essential bodily fluids such as human blood serums, urine, saliva, and interstitial fluids. It is worth noting that the accurate quantification of glucose concentrations within human blood has been effectively achieved by utilizing classical enzymatic sensors harmoniously integrated with optical and electrochemical transduction mechanisms. Monitoring glucose levels in various mediums has attracted exceptional attention from industrial to academic researchers for diabetes management, food quality control, clinical medicine, and bioprocess inspection. There has been an enormous demand for the creation of novel glucose sensors over the past ten years. Research has primarily concentrated on succeeding biocompatible and enhanced sensing abilities related to the present technologies, offering innovative avenues for more effective glucose sensors. Recent developments in wearable optical and electrochemical sensors with low cost, high stability, point-of-care testing, and online tracking of glucose concentration levels in biological fluids can aid in managing and controlling diabetes globally. New nanomaterials and biomolecules that can be used in electrochemical sensor systems to identify glucose concentration levels are developed thanks to advances in nanoscience and nanotechnology. Both enzymatic and non-enzymatic glucose electrochemical sensors have garnered much interest recently and have made significant strides in detecting glucose levels. In this review, we summarise several categories of non-enzymatic glucose sensor materials, including composites, non-precious transition metals and their metal oxides, hydroxides, precious metals and their alloys, carbon-based materials, conducting polymers, metal-organic framework (MOF)-based electrocatalysts, and wearable device-based glucose sensors deeply.

A wearable AuNP enhanced metal-organic gel (Au@MOG) sensor for sweat glucose detection with ultrahigh sensitivity

The demand for sensitive and non-invasive sensors for monitoring glucose levels in sweat has grown considerably in recent years. This study presents the development of a wearable sensor for sweat glucose detection with ultrahigh sensitivity. The sensor was fabricated by embedding Au nanoparticles (AuNPs) and metal-organic gels (MOGs) on nickel foam (NF). A non-enzymatic electrocatalytic glucose sensor has been developed to combine the three-dimensional network of MOGs with more active sites favourable for glucose diffusion and the transfer of electrons from glucose to the electrode. These results show that the sensor has an ultrahigh sensitivity of 13.94 mA mM-1 cm-2, a linear detection range between 2 and 600 μM, and a lower detection limit as low as 1 μM (signal/noise = 3) with comparable accuracy and reliability under non-alkaline conditions to those of high-pressure ion chromatography (HPIC). Furthermore, a wearable sweat glucose sensor has been constructed by sputtering an Au conductive layer on a flexible polydimethylsiloxane (PDMS) substrate and coating it with Au@MOGs. Our work demonstrates that the combination of Au NPs and MOGs can enhance the sensitivity and activity of these materials, making them useful for electrocatalytic glucose monitoring with ultrahigh sensitivity.

Advances in nanostructured material-based non-enzymatic electrochemical glucose sensors

Non-enzymatic electrochemical sensors that use functional materials to directly catalyze glucose have shown great promise in diabetes management, food control, and bioprocess inspection owing to the advantages of high sensitivity, long-term stability, and low cost. Recently, in order to produce enhanced electrochemical behavior, significant efforts have been devoted to the preparation of functional materials with regular nanostructure, as it provides high specific surface area and well-defined strong active sites for electrochemical sensing. However, the structure-performance correlation in this field has not been reviewed thoroughly in the literature. This review aims to present a comprehensive report on advanced zero- to three-dimensional nanostructures based on the geometric feature and to discuss in depth their structural effects on enzyme-free electrochemical detection of glucose. It starts by illustrating the sensing principles of nanostructured materials, followed by a detailed discussion on the structural effects related to the features of each dimension. The structure-performance correlation is explored by comparing the performance derived from diverse dimensional architectures, which is beneficial for the better design of regular nanostructure to achieve efficient enzyme-free sensing of glucose. Finally, future directions of non-enzymatic electrochemical glucose sensors to solve emerging challenges and further improve the sensing performance are also proposed.

Coaxial electrospinning synthesis of size-tunable CuO/NiO hollow heterostructured nanofibers: Towards detection of glucose level in human serum

Nanofibers (NFs) have found wide applications by virtue of their particular morphology and high specific surface area. In this study, size-tunable hollow CuO/NiO NFs were synthesized by coaxial electrospinning and subsequent calcination. The synthesized hollow CuO/NiO NFs owned large specific surface area for catalytic active sites. In addition, the formation of heterostructure interface between CuO and NiO was beneficial to improve the electrocatalytic performance. As non-enzymatic electrode material, the synthesized CuO/NiO NFs exhibited superior electrocatalytic capability for glucose oxidation. When the molar ratio of CuO to NiO is 0.4, the composite NFs achieved the optimal electrocatalytic ability for glucose oxidation, performing high sensitivity of 1324.17 μA mM^-1 cm^-2 and wide liner range from 1 to 10,000 μM. The constructed electrode has been utilized to detect glucose concentration in real serum with excellent recovery, indicating that CuO/NiO hollow heterostructured NFs are promising materials for biomedical applications.

Combining quasi-ZIF-67 hybrid nanozyme and G-quadruplex/hemin DNAzyme for highly sensitive electrochemical sensing

Zeolitic imidazolate frameworks (ZIFs), a famous subfamily of metal-organic frameworks (MOFs), are considered promising electrocatalysts. Herein, ZIF-67 was selected as an electrocatalyst for designing electrochemical sensors due to having the best electrocatalytic activity in ZIFs. To overcome the insufficient electrocatalytic activity of ZIFs, ZIF-67 derivatives (QZIF-67-X, where X represents calcination time) were obtained by calcining at 250 °C for a certain time. The porous structure of the precursor in QZIF-67-X is maintained, exposing more active centers. QZIF-67-X could accelerate electron transfer and lead to improve the electrocatalytic performance. Moreover, QZIF-67-2 was chosen as an Au nanoparticle-supported nanocarrier to further bind G-quadruplex/hemin DNAzymes with strong catalytic activity due to the best supporting activity of QZIF-67-2 among QZIF-67-X. The synergistic catalysis of QZIF-67-2 and G-quadruplex/hemin DNAzymes effectively amplified the reduction current signal of H₂O₂. The linear range of the prepared electrochemical sensor was 2 μM-65 mM, and the detection limit was 1.2 μM. Moreover, the real-time detection of H₂O₂ from HepG2 cells was achieved by the sensor, providing a novel technique for efficient anticancer drug evaluation. These results suggested that QZIF-67 can be utilized as an efficient electrocatalyst for improving the sensitivity of sensors.

Phosphoprotein Detection in Sweat Realized by Intercalation Structure 2D@3D g-C3N4@Fe3O4 Wearable Sensitive Motif

Abnormal protein phosphorylation in sweat metabolites is closely related to cancer, cardiovascular disease, and other diseases. The real-time monitoring of phosphoproteins in sweat is significant for early monitoring of disease biomarkers. Here, a high-efficiency electrochemical sensor for phosphoprotein in sweat was realized by 2D@3D g-C₃N₄@Fe₃O₄ with intercalation structure. Common phosphoprotein β-Casein was selected to demonstrate the platform's functionalities. The detection limit of g-C₃N₄@Fe₃O₄ could be as low as 9.7 μM, and the detection range was from 0.01 mg/mL to 1 mg/mL. In addition, the sensing platform showed good selectivity, reproducibility, and stability. We also investigated the effects of interface structure on adsorption properties and electronic properties of the g-C₃N₄ and Fe₃O₄ heterostructure using DFT. More electrons from Fe₃O₄ were transferred to g-C₃N₄, which increased the electrons in the energy band of N atoms and promoted the formation of stable N-H bonds with H atoms in phosphoproteins. We demonstrated phosphoprotein sensor functionality by measuring the phosphoprotein in human sweat during exercising. This work realizes a sensing platform for noninvasive and continuous detection of sweat phosphoproteins in wearable devices.

Enzyme-free glucose sensors with efficient synergistic electro-catalysis based on a ferrocene derivative and two metal nanoparticles

Gold electrodes (GE) were modified by the deposition of copper nanoparticles (CuNPs) and cobalt nanoparticles (CoNPs), followed by drop-casting of the ferrocene derivative FcCO-Glu-Cys-Gly-OH (Fc-ECG), resulting in two enzyme-free electrochemical sensors Fc-ECG/CuNPs/GE and Fc-ECG/CuNPs/GE. The ferrocene-peptide conjugate acts as an effective redox mediator for glucose oxidation, while metal nanoparticles acted as non-biological sites for glucose oxidation. Field emission scanning electron microscopy (FESEM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were carried out for characterization, while differential pulse voltammetry (DPV) was used for glucose quantification. Under optimized conditions, DPV shows a linear relationship between glucose concentration and the peak current. Both sensors showed a surprisingly high sensitivity of 217.27 and 378.70 μA mM-1 cm-2, respectively. A comparison to other glucose sensors shows a sensitivity that is 25 times higher. The sensors exhibit good reproducibility, stability, and repeatability. In injection experiments, recovery rates were 87.39-107.65% and 100.00-106.88%, respectively.

A novel electrochemical sensor for the detection of fipronil and its toxic metabolite fipronil sulfone using TiO2-polytriazine imide submicrostructured composite as an efficient electrocatalyst

For the first time, a simple and sensitive electrochemical sensor based on a screen printed electrode (SPE) modified with titanium dioxide (TiO₂) and polytriazine imide submicrostructured composite (TiO₂-PTI) has been developed for the simultaneous detection of fipronil (FIP) and its toxic metabolite fipronil sulfone (FIP-S). The submicrostructured composite material based on TiO₂ and PTI was obtained by simple hydrothermal treatment of the Ti peroxocomplexes in the presence of pristine. This carbon nitride allotrope has better crystallinity and conductivity than its graphitic analog. It was found that the TiO₂-PTI submicrostructured composite enhanced the electrochemical sensing of the SPE electrode towards FIP and its metabolite FIP-S in 0.1 M Britton-Robinson buffer (pH 10) at the oxidation potentials of 0.82 V and 0.94 V, respectively. In addition, it showed good stability and reproducibility for the determination of both analytes. Under optimal conditions, the peak currents by square wave voltammetry were found to vary linearly with FIP and FIP-S concentrations in the range from 0.01 to 10 μM and from 10 to 50 μM, with a detection limit of 8.42 nM, 3.6 μg/kg for FIP and 9.72 nM, 4.04 μg/kg for FIP-S. This sensor was successfully used to detect FIP and FIP-S in eggs and water samples with good recoveries of 90%-106.6%.

Covalent Immobilisation of a Nanoporous Platinum Film onto a Gold Screen-Printed Electrode for Highly Stable and Selective Non-Enzymatic Glucose Sensing

Progress in the development of commercially available non-enzymatic glucose sensors continues to be problematic due to issues regarding selectivity, reproducibility and stability. Overcoming these issues is a research challenge of significant importance. This study reports a novel fabrication process using a double-layer self-assembly of (3 mercaptopropyl)trimethoxysilane (MPTS) on a gold substrate and co-deposition of a platinum–copper alloy. The subsequent electrochemical dealloying of the less noble copper resulted in a nanoporous platinum structure on the uppermost exposed thiol groups. Amperometric responses at 0.4 V vs. Ag/AgCl found the modification to be highly selective towards glucose in the presence of known interferants. The sensor propagated a rapid response time <5 s and exhibited a wide linear range from 1 mM to 18 mM. Additionally, extremely robust stability was attributed to enhanced attachment due to the strong chemisorption between the gold substrate and the exposed thiol of MPTS. Incorporation of metallic nanomaterials using the self-assembly approach was demonstrated to provide a more reproducible and controlled molecular architecture for sensor fabrication. The successful application of the sensor in real blood serum samples displayed a strong correlation with clinically obtained glucose levels.

Synergetic polarization effect of protonation and Fe-doping on g-C3N4 with enhanced photocatalytic activity

The local polarization electric field resulting from protonation and Fe-doping in g-C3N4 can be formed, thus highly facilitating the separation and transport of charge carriers and boosting the photocatalytic activity.