A fully automated system for inorganic antimony preconcentration and speciation in urine

A retrospective and prospective of the use of bio- and nanomaterials for preconcentration, speciation, and determination of trace elements: a review spanning 25 years of research

This review covers the investigations carried out with my colleagues and students during the last 25 years aimed at the development of analytical procedures for the preconcentration and/or speciation analysis of trace and ultra-trace elements using bio- and nanosorbents employing different methodologies, analytical techniques, and instrumental approaches. In the last years, an important part of this research was based on the use of nanomaterials for preconcentration and/or speciation studies. For their properties, they constitute a break point in the evolution of analytical chemistry. Special attention was paid to carbon nanotubes (CNTs) that resulted effective sorbents in flow systems using different immobilization strategies to improve their sorption capabilities. They resulted unique tools for on-line solid-phase (micro)extraction methods providing the appropriate selectivity (clean-up) and sensitivity (preconcentration) to reach the expected levels of many elements in matrices of biological or environmental interest. The performance of the different substrates, their strengths and weaknesses for the determination of trace elements, and their species in different matrices by a variety of analytical techniques are discussed in detail, along with perspectives and possible challenges in future development. This survey contains 96 references and covers primarily the literature published over the last 25 years by our research group. Relevant publications on the topics discussed were also included.

Antimonene with two-orders-of-magnitude improved stability for high-performance cancer theranostics

Although the antimonene (AM) nanomaterial is recently emerging as a new photothermal therapy (PTT) agent, its rapid degradation in physiological medium immensely limits its direct utilization. To this end, we herein engineered AM by the cooperation of dimension optimization, size control, and cell membrane (CM) camouflage. Compared with traditional AM nanosheets, the resulting AM nanoparticles (∼55 nm) cloaked with the CM (denoted as CmNPs) exhibited significantly improved stability and increased photothermal efficacy as well as superior tumor targeting capacity. After intravenous injection, the CmNPs enabled satisfactory photoacoustic/photothermal multimodal imaging at tumor sites. Meanwhile, the PTT together with the newly explored function of photodynamic therapy (PDT) achieved a potent combination therapy with few side effects. The maximized theranostic performance thus strongly recommends CmNPs as a safe and highly reliable modality for anticancer therapy.

The potential DNA toxic changes among workers exposed to antimony trioxide

Occupational exposure to antimony has gained much interest when specific toxic effects were noticed among workers processing antimony. Thus, the aim of the present work was to investigate the potential DNA oxidative damage occurring among Egyptian workers occupationally exposed to antimony trioxide. The study was conducted on 25 subjects exposed to antimony trioxide while working in the polymerization process of polyester in Misrayon and Polyester Fiber Company, KafrEldawwar, Beheira, Egypt. Urinary antimony levels were assessed using inductive coupled plasma-optical emission spectrometry (ICP-OES) and considered as a biological exposure index. DNA damage and total oxidant capacity (TOC) were assessed using ELISA. DNA damage was detected in the form of increased apurinic/apyrimidinic (AP) sites among antimony trioxide-exposed workers compared to control subjects, but it could not be explained by oxidative mechanisms due to lack of significant correlation between DNA damage and measured TOC. Antimony trioxide might have a genotoxic impact on occupationally exposed workers which could not be attributed to oxidative stress in the studied cases.

A Flow Method for Chemiluminescence Determination of Antimony(III) and Antimony(V) Using a Rhodamine B-Cetyltrimethylammonium Chloride Reversed Micelle System Following On-Line Extraction

A rapid and sensitive flow method, based on the combination of on-line solvent extraction with reversed micellar mediated chemiluminescence (CL) detection using rhodamine B (RB), was developed for the determination of antimony(III) and antimony(V) in aqueous samples. The on-line extraction procedure involved ion-pair formation of the antimony(V) chloro-complex anion with the protonated RBH(+) ion and its extraction from an aqueous hydrochloric acid solution into toluene, followed by phase separation using a microporous membrane. When in a flow cell of a detector, the ion-pair in the extract driven was mixed with the reversed micellar solution of cetyltrimethylammonium chloride in 1-hexanol-cyclohexane/water (0.60 mol dm(-3) H2SO4) containing cerium(IV), its uptake by the reversed micelles and the subsequent CL oxidation of RB with Ce(IV) occurred easily, then the produced CL signal was measured. Using the proposed flow method under the optimized experimental conditions, a detection limit (DL) of 0.35 μmol dm(-3) and a linear calibration graph with a dynamic range from DL to 16 μmol dm(-3) were obtained for Sb(V) with a precision of 1.4% relative standard deviation (n = 5) at the Sb(V) concentration of 8.2 μmol dm(-3). The present method was successfully applied to the determination of Sb(V) in water samples and to the differential determination of Sb(III) and Sb(V) in copper electrolyte industrial samples, where total antimony Sb(III) + Sb(V) was determined after oxidation of Sb(III) to Sb(V) with Ce(IV) and Sb(III) was calculated by difference, for which the DL was almost the same as that for Sb(V).

Application of hyphenated techniques in speciation analysis of arsenic, antimony, and thallium

Due to the fact that metals and metalloids have a strong impact on the environment, the methods of their determination and speciation have received special attention in recent years. Arsenic, antimony, and thallium are important examples of such toxic elements. Their speciation is especially important in the environmental and biomedical fields because of their toxicity, bioavailability, and reactivity. Recently, speciation analytics has been playing a unique role in the studies of biogeochemical cycles of chemical compounds, determination of toxicity and ecotoxicity of selected elements, quality control of food products, control of medicines and pharmaceutical products, technological process control, research on the impact of technological installation on the environment, examination of occupational exposure, and clinical analysis. Conventional methods are usually labor intensive, time consuming, and susceptible to interferences. The hyphenated techniques, in which separation method is coupled with multidimensional detectors, have become useful alternatives. The main advantages of those techniques consist in extremely low detection and quantification limits, insignificant interference, influence as well as high precision and repeatability of the determinations. In view of their importance, the present work overviews and discusses different hyphenated techniques used for arsenic, antimony, and thallium species analysis, in different clinical, environmental and food matrices.

Biosorption: a new rise for elemental solid phase extraction methods

Biosorption is a term that usually describes the removal of heavy metals from an aqueous solution through their passive binding to a biomass. Bacteria, yeast, algae and fungi are microorganisms that have been immobilized and employed as sorbents in biosorption processes. The binding characteristics of microorganisms are attributed to functional groups on the surface providing some features to the biosorption process like selectivity, specificity and easy release. These characteristics turn the biosorption into an ideal process to be introduced in solid phase extraction systems for analytical approaches. This review encompasses the research carried out since 2000, focused on the employment of biosorption processes as an analytical tool to improve instrumental analysis. Since aminoacids and peptides as synthetic analogues of natural metallothioneins, proteins present in the cell wall of microorganisms, have been also immobilized on solid supports (controlled pore glass, carbon nanotubes, silica gel polyurethane foam, etc.) and introduced into solid phase extraction systems; a survey attending this issue will be developed as well in this review.

Heat-treated Saccharomyces cerevisiae for antimony speciation and antimony(III) preconcentration in water samples

An analytical method was developed for antimony speciation and antimony(III) preconcentration in water samples. The method is based on the selective retention of Sb(III) by modified Saccharomyces cerevisiae in the presence of Sb(V). Heat, caustic and solvent pretreatments of the biomass were investigated to improve the kinetics and thermodynamics of Sb(III) uptake process at room temperature. Heating for 30 min at 80 degrees C was defined as the optimal treatment. Antimony accumulation by the cells was independent of pH (5-10) and ionic strength (0.01-0.1 mol L(-1)). 140 mg of yeast and 2h of contact were necessary to ensure quantitative sequestration of Sb(III) up to 750 microg L(-1). In these conditions, Sb(V) was not retained. Sb(V) was quantified in sorption supernatant by inductively coupled plasma mass spectrometry (ICP-MS) or inductively coupled plasma optical emission spectrometry (ICP-OES). Sb(III) was determined after elution with 40 mmol L(-1) thioglycolic acid at pH 10. A preconcentration factor close to nine was achieved for Sb(III) when 100mL of sample was processed. After preconcentration, the detection limits for Sb(III) and Sb(V) were 2 and 5 ng L(-1), respectively, using ICP-MS, 7 and 0.9 microg L(-1) using ICP-OES. The proposed method was successfully applied to the determination of Sb(III) and Sb(V) in spiked river and mineral water samples. The relative standard deviations (n=3) were in the 2-5% range at the tenth microg L(-1) level and less than 10% at the lowest Sb(III) and Sb(V) tested concentration (0.1 microg L(-1)). Corrected recoveries were in all cases close to 100%.

On-site spectrophotometric determination of antimony in water, soil and dust samples of Central India

A new, selective and sensitive on-site spectrophotometric method for the determination of antimony at trace level in water, soil and dust samples of Central India has been demonstrated. It is based on the color reaction of Sb(III) with I(-) ions in the presence of a cationic surfactant cetylpyridinium chloride (CPC) in acidic media, and subsequent extraction of the complex with N-phenylbenzimidoylthiourea (PBITU) into chloroform to give a yellow colored complex. The value of apparent molar absorptivity of the complex in the terms of Sb is (7.84) x 10(4)l mol(-1)cm(-1) at 440 nm. The detection limit of the method is 5 ng ml(-1). In addition, the present method is free from interferences of all metal ions that are associated during the determination of antimony in environmental samples.