Capillary electrophoresis–chemiluminescence determination of norfloxacin and prulifloxacin

Isomorphic Insertion of Ce(III)/Ce(IV) Centers into Layered Double Hydroxide as a Heterogeneous Multifunctional Catalyst for Efficient Meerwein-Ponndorf-Verley Reduction

The development of highly active acid-base catalysts for transfer hydrogenations of biomass derived carbonyl compounds is a pressing challenge. Solid frustrated Lewis pairs (FLP) catalysis is possibly a solution, but the development of this concept is still at a very early stage. Herein, stable, phase-pure, crystalline hydrotalcite-like compounds were synthesized by incorporating cerium cations into layered double hydroxide (MgAlCe-LDH). Besides the insertion of well-isolated cerium centers surrounded by hydroxyl groups, the formation of hydroxyl vacancies near the aluminum centers, which were formed by the insertion of cerium centers into the layered double hydroxides (LDH) lattice, was also identified. Depending on the initial cerium concentration, LDHs with different Ce(III)/Ce(IV) ratios were produced, which had Lewis acidic and basic characters, respectively. However, the acid-base character of these LDHs was related to the actual Ce(III)/Ce(IV) molar ratios, resulting in significant differences in their catalytic performance. The as-prepared structures enabled varying degrees of transfer hydrogenation (Meerwein-Ponndorf-Verley MPV reduction) of biomass-derived carbonyl compounds to the corresponding alcohols without the collapse of the original lamellar structure of the LDH. The catalytic markers through the test reactions were changed as a function of the amount of Ce(III) centers, indicating the active role of Ce(III)-OH units. However, the cooperative interplay between the active sites of Ce(III)-containing specimens and the hydroxyl vacancies was necessary to maximize catalytic efficiency, pointing out that Ce-containing LDH is a potentially commercial solid FLP catalysts. Furthermore, the crucial role of the surface hydroxyl groups in the MPV reactions and the negative impact of the interlamellar water molecules on the catalytic activity of MgAlCe-LDH were demonstrated. These solid FLP-like catalysts exhibited excellent catalytic performance (cyclohexanol yield of 45%; furfuryl alcohol yield of 51%), which is competitive to the benchmark Sn- and Zr-containing zeolite catalysts, under mild reaction conditions, especially at low temperature (T = 65 °C).

Fluoroquinolones Hybrid Molecules as Promising Antibacterial Agents in the Fight against Antibacterial Resistance

The emergence of bacterial resistance has motivated researchers to discover new antibacterial agents. Nowadays, fluoroquinolones keep their status as one of the essential classes of antibacterial agents. The new generations of fluoroquinolones are valuable therapeutic tools with a spectrum of activity, including Gram-positive, Gram-negative, and atypical bacteria. This review article surveys the design of fluoroquinolone hybrids with other antibacterial agents or active compounds and underlines the new hybrids' antibacterial properties. Antibiotic fluoroquinolone hybrids have several advantages over combined antibiotic therapy. Thus, some challenges related to joining two different molecules are under study. Structurally, the obtained hybrids may contain a cleavable or non-cleavable linker, an essential element for their pharmacokinetic properties and mechanism of action. The design of hybrids seems to provide promising antibacterial agents helpful in the fight against more virulent and resistant strains. These hybrid structures have proven superior antibacterial activity and less susceptibility to bacterial resistance than the component molecules. In addition, fluoroquinolone hybrids have demonstrated other biological effects such as anti-HIV, antifungal, antiplasmodic/antimalarial, and antitumor activity. Many fluoroquinolone hybrids are in various phases of clinical trials, raising hopes that new antibacterial agents will be approved shortly.

Structural Characterization of the Millennial Antibacterial (Fluoro)Quinolones-Shaping the Fifth Generation

The evolution of the class of antibacterial quinolones includes the introduction in therapy of highly successful compounds. Although many representatives were withdrawn due to severe adverse reactions, a few representatives have proven their therapeutical value over time. The classification of antibacterial quinolones into generations is a valuable tool for physicians, pharmacists, and researchers. In addition, the transition from one generation to another has brought new representatives with improved properties. In the last two decades, several representatives of antibacterial quinolones received approval for therapy. This review sets out to chronologically outline the group of approved antibacterial quinolones since 2000. Special attention is given to eight representatives: besifloxacin, delafoxacin, finafloxacin, lascufloxacin, nadifloxacin and levonadifloxacin, nemonoxacin, and zabofloxacin. These compounds have been characterized regarding physicochemical properties, formulations, antibacterial activity spectrum and advantageous structural characteristics related to antibacterial efficiency. At present these new compounds (with the exception of nadifloxacin) are reported differently, most often in the fourth generation and less frequently in a new generation (the fifth). Although these new compounds' mechanism does not contain essential new elements, the question of shaping a new generation (the fifth) arises, based on higher potency and broad spectrum of activity, including resistant bacterial strains. The functional groups that ensured the biological activity, good pharmacokinetic properties and a safety profile were highlighted. In addition, these new representatives have a low risk of determining bacterial resistance. Several positive aspects are added to the fourth fluoroquinolones generation, characteristics that can be the basis of the fifth generation. Antibacterial quinolones class continues to acquire new compounds with antibacterial potential, among other effects. Numerous derivatives, hybrids or conjugates are currently in various stages of research.

Screening and optimization of samarium-assisted complexation for the determination of norfloxacin, levofloxacin and lomefloxacin in their corresponding dosage forms employing spectrofluorimetry

Multivariate strategy was applied for setting a fluorescent technique for the determination of three fluoroquinolones: norfloxacin (NOR), levofloxacin (LEV) and lomefloxacin (LOM) in their pure powder and dosage forms. Based on their known interaction with lanthanides, and augmented fluorescence intensity obtained by antenna effect at λ_ex/λ_em = 314/553, 312/553 and 310/556 for NOR, LEV and LOM, respectively, the current research was scrutinized. Four continuous factors were selected for study in the screening step by means of Plackett-Burman Design, where temperature factor was excluded for being non-significant and the other factors as volume of metal ion solution, pH and reaction time were evaluated through Central Composite Design. 3-D surfaces demonstrations and 2-D contour plots designated the factors interactions followed by optimization plots, which defined the best blend for factors conjunction. pH factor was the chief motor force affecting the response as the number of coordinated ligands formed depends on the pH, whereas 1:2 complex is the main species at higher pH values followed by the volume of metal ion solution and ended by little effect of the reaction time. Model verification was monitored, which showed the model superiority for the three fluoroquinolones, where all target points tested were in good agreement with the predicted ones. The linear range for the tested drugs were found to be 0.090-1.280 μg/mL for NOR, 0.068-1.448 μg/mL for LEV and 0.077-1.552 μg/mL in case of LOM, thus approving the suitability of this method for Quality Control testing. Furthermore, applying these conditions to test the fluoroquinolones in their pharmaceuticals was done as well as intra and inter-day effects as to confirm the validity of this technique for routine analysis. Recovery % and RSD were found to be 99.958 ± 0.797, 99.887 ± 0.935 and 100.427 ± 0.698 for NOR, LEV and LOM respectively in their pure powder. While it was calculated to be 100.200 ± 0.785, 100.530 ± 0.396 and 100.620 ± 0.896 for NOR, LEV and LOM in their corresponding dosage forms. This excellent precision and accuracy obtained in results impulse it to be one of the most appropriate methods for further analysis.

Analytical Methods for Determining Third and Fourth Generation Fluoroquinolones: A Review

ABSTRACT

Fluoroquinolones of the third and fourth generation posses wide bactericidal activity. Monitoring concentrations of antibacterial agents provides effective therapy and prevents the increase of bacterial resistance to antibiotics. The pharmacodynamic parameters that best describe fluoroquinalone activity are AUC/MIC and Cmax/MIC. Determining the level of this type of drug is essential to reach the effective concentration that inhibits the growth of bacteria. Determining the pharmaceutical formulation confirms the purity of a substance. Many methods have been developed to determine the level of these substances. They involve mainly the following analytical techniques: chromatography, capillary electrophoresis, and spectroscopy. The separation techniques were combined with different measuring devices, such as ultraviolet (UV), fluorescence detector (FLD), diode array detector (DAD), and mass spectrometry (MS). The analytical procedures require proper sample pre-conditioning such as protein precipitation, extraction techniques, filtration, or dilution. This paper reviews the reported analytical methods for the determining representatives of the third and fourth generation of fluoroquinolones. Attention was paid to pre-conditioning of the samples and the applied mobile phase. This report might be helpful in the selection of the proper procedure in determining the abovementioned drugs in different matrices.

GRAPHICAL ABSTRACT

Review of Properties and Analytical Methods for the Determination of Norfloxacin

The first-generation quinolones have their greatest potency against Gram-negative bacteria, but newly developed molecules have exhibited increased potency against Gram-positive bacteria, and existing agents are available with additional activity against anaerobic microorganisms. Norfloxacin is a broad-spectrum antimicrobial fluoroquinolone used against Gram-positive and Gram-negative organisms (aerobic organisms). There are different analytical methods available to determine norfloxacin applied in quality control of this medicine in order to ensure its effectiveness and safety. The authors present an overview of the fourth generation of quinolones, followed by the properties, applications, and analytical methods of norfloxacin. These results show several existing analytical techniques that are flexible and broad-based methods of analysis in different matrices. This article focuses on bionalytical and pharmaceutical quality-control applications, such as thin-layer chromatography, microbiological assay, spectrophotometry, capillary electrophoresis (CE), and high-performance liquid chromatography (HPLC).

Study of silver nanoparticles sensitized fluorescence and second-order scattering of terbium(III)-pefloxacin mesylate complex and determination of pefloxacin mesylate

α-Keto acid of pefloxacin mesylate (PFLX) can form the complex with Terbium(III). The intramolecular energy from PFLX to Terbium(III) ion takes place when excited, and thus Terbium(III) excited state is formed and then emits the characteristic fluorescence of Terbium(III), locating at 490, 545, 580, and 620 nm. The second-order scattering (SOS) peak at 545 nm also appears for the complex with the exciting wavelength of 273 nm. When the silver nanoparticles are added to the system, the luminescence intensity at 545 nm greatly increased. So, with the adding of nanoparticles to the Terbium(III)-PFLX complex, not only is the intramolecular energy promoted but also the SOS intensity is enhanced. The experimental results show that it is the silver nanoparticles with certain size and certain concentration which can greatly enhance the fluorescence-SOS intensity, and the relative intensity at 545 nm is proportional to the amount of PFLX. Based on this phenomenon, a novel method for the determination of PFLX has been developed and applied to the determination of PFLX in capsule and serum samples.

Development and Validation of a RP-HPLC Method for Estimation of Prulifloxacin in Tablet Dosage Form

A simple, precise, rapid, accurate and economic reverse phase high performance liquid chromatographic method has been developed for the estimation of prulifloxacin in tablet dosage form. The separation was achieved by using octadecylsilane column (C₁₈) and KH₂PO₄ buffer: acetonitrile adjusted to pH 7.3 with triethyl amine in proportion of 10:90 v/v as mobile phase, at a flow rate of 1.0 ml/min. The detection was carried out at 278 nm. The retention time of prulifloxacin was found to be 2.4 min. The limit of detection and limit of quantitation were found to be 0.14 μg/ml and 0.42 μg/ml respectively. The accuracy and reliability of the proposed method was ascertained by evaluating various validation parameters like linearity, precision, accuracy and specificity according to ICH guidelines. The proposed method provides an accurate and precise quality control tool for routine analysis of prulifloxacin in tablet dosage form.

Sensitive and selective capillary electrophoretic analysis of proteins by zirconia nanoparticle-enhanced copper (II)-catalyzed luminol-hydrogen peroxide chemiluminescence

We report herein a sensitive, selective, convenient CE determination of heme proteins in complex matrices by a sodium-dodecyl-sulfate-assisted, zirconia nanoparticle-enhanced copper (II)-catalyzed luminol-hydrogen peroxide chemiluminescence (CCLHPCL). Introducing a segment of sodium dodecyl sulfate to the capillary after sample injection not only rendered selective detection by quenching the luminescence signals from the non-heme proteins but also owning to the suppressed protein adsorption, led to significant improvement in separation efficiency and detection sensitivity. The signals were further improved by addition of ZrO(2) nanoparticles to the chemiluminescence solution. Compared with the conventional CCLHPCL, the detection limits (S/N=3) were improved by 10.2-22.0 folds, with 7.8×10(-9), 3.3×10(-9) and 1.5×10(-9) M for three model proteins, viz, myoglobin, hemoglobin and cytochrome C, respectively. Because the method did not require sophisticated pretreatment, it was convenient to analyze heme proteins in complex matrices, as demonstrated, hemoglobin in human blood and spiked human urine samples.

Spectroscopic studies on the lanthanide sensitized luminescence and chemiluminescence properties of fluoroquinolone with different structure

Lanthanide sensitized luminescence and chemiluminescence (CL) are of great importance because of the unique spectral properties, such as long lifetime, large Stokes shifts, and narrow emission bands characteristic to lanthanide ions (Ln(3+)). With the fluoroquinolone (FQ) compounds including enoxacin (ENX), norfloxacin (NFLX), lomefloxacin (LMFX), fleroxacin (FLRX), ofloxacin (OFLX), rufloxacin (RFX), gatifloxacin (GFLX) and sparfloxacin (SPFX), the luminescence and CL properties of Tb(3+)-FQ and Eu(3+)-FQ complexes have been investigated in this contribution. Ce(4+)-SO(3)(2-) in acidic conditions was taken as the CL system and sensitized CL intensities of Tb(3+)-FQ and Eu(3+)-FQ complexes were determined by flow-injection analysis. The luminescence and CL spectra of Tb(3+)-FQ complexes show characteristic peaks of Tb(3+) at 490 nm, 545 nm, 585 nm and 620 nm. Complexes of Tb(3+)-ENX, Tb(3+)-NFLX, Tb(3+)-LMFX and Tb(3+)-FLRX display relatively strong emission intensity compared with Tb(3+)-OFLX, Tb(3+)-RFX, Tb(3+)-GFLX and Tb(3+)-SPFX. Quite weak peaks with unique characters of Eu(3+) at 590 nm and 617 nm appear in the luminescence and CL spectra of Eu(3+)-ENX, but no notable sensitized luminescence and CL of Eu(3+) could be observed when Eu(3+) is added into other FQ. The distinct differences on emission intensity of Tb(3+)-FQ and Eu(3+)-FQ might originate from the different energy gap between the triplet levels of FQ and the excited levels of the Ln(3+). The different sensitized luminescence and CL signals among Tb(3+)-FQ complexes could be attributed to different optical properties and substituents of these FQ compounds. The detailed mechanism involved in the luminescence and CL properties of Tb(3+)-FQ and Eu(3+)-FQ complexes has been investigated by analyzing the luminescence and CL spectra, quantum yields, and theoretical calculation results.

A novel chemiluminescence reaction system for the determination of norfloxacin with Ag(III) complex

A novel chemiluminescence (CL) system for the determination of norfloxacin (NFLX) is developed based on the direct CL reaction of [Ag(HIO(6))(2)](5-)-H(2)SO(4)-NFLX system. The possible mechanism of CL emission and enhancing effect was discussed by comparing UV, fluorescence and CL spectra. [Ag(HIO(6))(2)](5-) in the presence of H(2)SO(4) could produce CL emission at 490 nm, this might be caused by the excited state (O(2))(2)*. The enhancing effect of NFLX may be produced through an intermolecular energy transfer from part of (O(2))(2)* to NFLX molecule and complex of Ag(3+) and NFLX. The CL intensity emission intensity was linear in the range 1.34 x 10(-8) to 5.44 x 10(-6) gmL(-1) with correlation coefficient of 0.9982. The detection limit (s/n=3) was 3.10 x 10(-9) gmL(-1). The recovery was in the range of 90.0-104% with the RSD of 1.1-2.8%. The proposed flow injection CL method was applied satisfactorily for the determination of NFLX in capsule, human serum and urine.

Methods for the analysis of fluoroquinolones in biological fluids

Methods for the analysis of ten selected fluoroquinolone antibiotics in biological fluids are reviewed. Approaches for sample preparation, detection methods, limits of detection and quantitation, and recovery information are provided for both single analyte and multi-analyte fluoroquinolone methods.