“Orange alert”: A fluorescent detector for bisphenol A in water environments

Chronological development of functional fluorophores for bio-imaging

Functional fluorophores represent an emerging research field, distinguished by their diverse applications, especially in sensing and cellular imaging. After the discovery of quinine sulfate and subsequent elucidation of the fluorescence mechanism by Sir George Stokes, research in the field of fluorescence gained momentum. Over the past few decades, advancements in sophisticated instruments, including super-resolution microscopy, have further promoted cellular imaging using traditional fluorophores. These advancements include deciphering sensing mechanisms via photochemical reactions and scrutinizing the applications of fluorescent probes that specifically target organelles. This approach elucidates molecular interactions with biomolecules. Despite the abundance of literature illustrating different classes of probe development, a concise summary of newly developed fluorophores remains inadequate. In this review, we systematically summarize the chronological discovery of traditional fluorophores along with new fluorophores. We briefly discuss traditional fluorophores ranging from visible to near-infrared (NIR) in the context of cellular imaging and in vivo imaging. Furthermore, we explore ten new core fluorophores developed between 2007 and 2022, which exhibit advanced optical properties, providing new insights into bioimaging. We illustrate the utilization of new fluorophores in cellular imaging of biomolecules, such as reactive oxygen species (ROS), reactive nitrogen species (RNS), and proteins and microenvironments, especially pH and viscosity. Few of the fluorescent probes provided new insights into disease progression. Furthermore, we speculate on the potential prospects and significant challenges of existing fluorophores and their potential biomedical research applications. By addressing these aspects, we intend to illuminate the compelling advancements in fluorescent probe development and their potential influence across various fields.

β-Bi2O3 Nanosheets Functionalized with Bisphenol A Synthetic Receptors: A Novel Material for Sensitive Photoelectrochemical Platform Construction

In this study, β-Bi₂O₃ nanosheets functionalized with bisphenol A (BPA) synthetic receptors were developed by a simple molecular imprinting technology and applied as the photoelectric active material for the construction of a BPA photoelectrochemical (PEC) sensor. BPA was anchored on the surface of β-Bi₂O₃ nanosheets via the self-polymerization of dopamine monomer in the presence of a BPA template. After the elution of BPA, the BPA molecular imprinted polymer (BPA synthetic receptors)-functionalized β-Bi₂O₃ nanosheets (MIP/β-Bi₂O₃) were obtained. Scanning electron microscopy (SEM) of MIP/β-Bi₂O₃ revealed that the surface of β-Bi₂O₃ nanosheets was covered with spherical particles, indicating the successful polymerization of the BPA imprinted layer. Under the best experimental conditions, the PEC sensor response was linearly proportional to the logarithm of BPA concentration in the range of 1.0 nM to 1.0 μM, and the detection limit was 0.179 nM. The method had high stability and good repeatability, and could be applied to the determination of BPA in standard water samples.

Fluorometric detection of bisphenol A using β-cyclodextrin-functionalized ZnO QDs

The estrogenic property of bisphenol A (BPA) leads to potential adverse health and ecological effects. A simple, selective, and cost-effective sensor capable of detecting BPA would have a noteworthy relevance for the environmental system. The present work illustrates the synthesis and characterization of β-cyclodextrin (β-CD) functionalized zinc oxide (ZnO) quantum dots (QDs) for the selective detection of BPA. BPA has a fluorescence quenching effect on functionalized ZnO QDs, and the decrease in fluorescence intensity is associated with the BPA concentration between 2 and 10 μM. Under the optimum reaction condition, a good linear correlation was obtained between relative fluorescence-quenching intensity of β-cyclodextrin-functionalized ZnO QDs and BPA concentration (R² = 0.9891). The lower detection limit of functionalized QDs for BPA was estimated to be 0.19 μM, which is lower than the toxic limits in aquatic biota. The fluorescence-based detection of BPA may be ascribed to the electron transfer mechanism, which is elucidated with scientific details from the literature.

Simultaneous and fast determination of bisphenol A and diphenyl carbonate in polycarbonate plastics by using excitation-emission matrix fluorescence couples with second-order calibration method

A new strategy for the determination of bisphenol A (BPA) and diphenyl carbonate (DPC) in polycarbonate plastics has been proposed, combing excitation-emission matrix fluorescence and second-order chemometrics methods. The studied compounds are two of the most frequently used chemical raw materials and intermediates, which is mainly used for bio-chemical products. The method is fast and sensitive as it can avoid tedious pretreatment steps and large amounts of organic solvents consumption. Chemometrics allowed accurate and precise quantification of two target analytes even in the presence of severe spectral overlap, unknown and background interferences, which benefit from "second-order advantages" provided by chemometrics multivariate calibration. Reasonable quantification results were obtained in real plastics samples, with limits of detection for two analytes were 0.04 and 1.18 × 10³ ng mL^-1 and limits of quantitation were 0.11 and 3.58 × 10³ ng mL^-1. In addition, the average recoveries for BPA and DPC were 99.35% and 83.50% with relative standard deviation <2.30%. It was proved that the proposed method can be a useful and sensitive tool to the determination of BPA and DPC in different polycarbonate plastics with a simple sample pretreatment at low cost.

Emissions from corrosion protection systems of offshore wind farms: Evaluation of the potential impact on the marine environment

Offshore wind energy is a fast growing sector of renewable energies worldwide. This will change the marine environment and thus, a wide range of environmental impacts of offshore wind farms are subject of current research. Here we present an overview about chemical emissions from corrosion protection systems, discuss their relevance and potential impact to the marine environment, and suggest strategies to reduce their emissions. Corrosion is a general problem for offshore infrastructures and corrosion protection systems are necessary to maintain the structural integrity. These systems are often in direct contact with seawater and have different potentials for emissions, e.g. galvanic anodes emitting substantial amounts of metals. Organic coatings may release organic substances due to weathering and/or leaching. Current assumptions suggesting a low environmental impact, but monitoring data is not sufficient to assess the environmental impact of this new source.

Synthesis of 3,5-Disubstituted BODIPYs Bearing N-Containing Five-Membered Heteroaryl Groups via Nucleophilic C-N Bond Formation

Aromatic substitution reactions were applied to the divergent synthesis of a series of symmetrically and unsymmetrically 3,5-disubstituted BODIPYs bearing N-heteroaryl groups. Furthermore, the effect of N-heteroaryl substituents at the 3- and 5-positions on the optical and photophysical properties of the BODIPY π-electron system was elucidated.

Advances in sensing and biosensing of bisphenols: A review

Bisphenols (BPs) are well known endocrine disrupting chemicals (EDCs) that cause adverse effects on the environment, biotic life and human health. BPs have been studied extensively because of an increasing concern for the safety of the environment and for human health. They are major raw materials for manufacturing polycarbonates, thermal papers and epoxy resins and are considered hazardous environmental contaminants. A vast array of sensors and biosensors have been developed for the sensitive screening of BPs based on carbon nanomaterials (carbon nanotubes, fullerenes, graphene and graphene oxide), quantum dots, metal and metal oxide nanocomposites, polymer nanocomposites, metal organic frameworks, ionic liquids and molecularly imprinted polymers. This review is devoted mainly to a variety of sensitive, selective and reliable sensing and biosensing methods for the detection of BPs using electrochemistry, fluorescence, colorimetry, surface plasmon resonance, luminescence, ELISAs, circular dichroism, resonance Rayleigh scattering and adsorption techniques in plastic products, food samples, food packaging, industrial wastes, pharmaceutical products, human body fluids and many other matrices. It summarizes the advances in sensing and biosensing methods for the detection of BPs since 2010. Furthermore, the article discusses challenges and future perspectives in the development of novel sensing methods for the detection of BP analogs.

Magnetic separate "turn-on" fluorescent biosensor for Bisphenol A based on magnetic oxidation graphene

Bisphenol A (BPA) is commonly considered to cause a health hazard to wildlife and humans, acting as an exogenous estrogen. Herein, a magnetic separate "turn-on" fluorescent method for the detection of BPA was proposed based on fluorescence resonance energy transfer (FRET) between fluorescein-labeled BPA aptamer and magnetic oxidation graphene (MGO). At different concentrations of BPA, the fluorescence intensity of the sensing system was varied. The detection limit of 0.071ng/mL was obtained with the linear range of 0.2-10ng/mL. The biosensor exhibited excellent anti-interference ability and selectivity in actual water samples.

Chemometrics-assisted cyclodextrin-enhanced excitation-emission fluorescence spectroscopy for the simultaneous green determination of bisphenol A and nonylphenol in plastics

The aim of this work was to quantify two relevant priority chemicals, bisphenol A (BPA) and 4-nonylphenol (NP), coupling the sensitivity of fluorescence in organized media and the selectivity of multivariate calibration, measuring excitation-emission fluorescence matrices in an aqueous methyl-β-cyclodextrin solution. The studied priority pollutants are two of the most frequently found xenoestrogens in the environment, and are therefore of public health concern.The data were successfully processed by applying unfolded partial least-squares coupled to residual bilinearization (U-PLS/RBL), which provided the required selectivity for overcoming the severe spectral overlapping among the analyte spectra and also those for the interferents present in real samples. A rigorous International Union of Pure and Applied Chemistry (IUPAC)-consistent approach was applied for the calculation of the limits of detection. Values in the ranges of 1-2 and 4-14 ng mL(-1) were obtained in validation samples for BPA and NP, respectively. On the other hand, low relative prediction errors between 3% and 8% were achieved. The proposed method was successfully applied to the determination of BPA and NP in different plastics. In positive samples, after an easy treatment with a small volume of ethanol at 35°C, concentrations were found to range from 26 to 199 ng g(-1) for BPA, and from 95 to 30,000 ng g(-1) for NP.

Spectrofluorimetric study of phenolic endocrine disruptors in cyclodextrin media

The strong interaction between bisphenol A, 4-octylphenol and 4-nonylphenol and selected cyclodextrins is demonstrated through a spectrofluorimetric study. The formed complexes would be interest in analytical areas based on green chemicals.